Industrial Silicon411 from Shenzhen Yetop Electric Power Group Co., Ltd. | Model: IS-903380253 | Price: $Negotiable Per Long Ton | Minimum Order Quantity: 20 Long Ton | Delivery Time: 5-6 Business Days | Shipping Port: Guangdong | Packaging: Standard | Capacity: huge | Certification: iso/ts16949 |
Industrial Silicon553 from Shenzhen Yetop Electric Power Group Co., Ltd. | Model: IS-903380244 | Price: $Negotiable Per Long Ton | Minimum Order Quantity: 20 Long Ton | Delivery Time: 18-19 Business Days | Shipping Port: Guangdong | Packaging: Standard | Capacity: high | Certification: brc |
Factory Price Silicone Rubber Rtv 2
YJS-620 is a two-component 1:1 Mix addition (platinum)cured RTV silicone rubber which cures at room temperature. Because of its considerable fluidity, it is recommended for the duplication of models with many undercuts. This stuff is really thin and easy to pour.
Product index: XJ-201T XJ-201Q Viscosity cst:700000-800000 1000000-1200000 Appearance: Microtransparent milky paste Microtransparent milky paste Specific gravity:1.03-1.05 1.03-1.05 Product features: XJ201T,XJ201Q silicone paste are a paste mixture prepared by thermal condensation of silicone oil with different viscosity (350CST, 1000CST, 60000-10000CST) in different proportions, supplemented by gas phase silica, T functional group, Q functional group silicone and special diffuser at high temperature. When used, it is supplemented by certain thickening agent. Emulsifier, etc., can be made into different uses of defoaming agent. Widely used in printing and dyeing, paper making, ore flotation, paint and so on, featuring fast defoaming speed, good dispersive performance and long foam suppression time.
Deoxidizer: Ferro silicon is used in the steelmaking industry as a precipitation deoxidizer and diffusion deoxidizer. Reducing agent: high-silicon ferro silicon or siliceous alloys can be used as reducing agents for the production of low-carbon iron alloys in the ferroalloy industry. Alloying agent: Ferro silicon can be used as alloying agent for low-alloy structural steel, composite steel, spring steel, bearing steel, heat-resistant steel and electric silicon steel smelting, to produce single crystal silicon or to prepare non-ferrous metal alloys. Inoculant: adding ferro silicon to cast iron can be used as an inoculant for nodular cast iron to prevent the formation of carbides, promote precipitation and spheroidization of graphite, thereby improving the properties of cast iron. Coating: Ferro silicon powder can be used as a suspension phase in the beneficiation industry, and can be used as a coating for welding rods in the welding rod manufacturing industry.
CAS No.:61827-42-7 MF:RO.(C2H4O)n Purity:99.5% Type:Absorbent Absorbent Variety: Activated Carbon Usage: Coating Auxiliary Agents, Electronics Chemicals, Leather Auxiliary Agents, Paper Chemicals, Petroleum Additives, Plastic Auxiliary Agents, Rubber Auxiliary Agents, Surfactants, Textile Auxiliary Agents, Water Treatment Chemicals Water content (%):â?¤1.0 Characteristic and Applications: 1. Easily dissolved in water, excellent property of emulsification, penetrability and humectation. 2. Used as abstergent, degreasing agent, refining agent, emulgator in textile industry and leather processing industry. 3. Have special emulsify effect to amido silicone oil and dimethyl silicone oil, improve efficacy after use. 4. Used as metal processing additive, multifunctional cleaning agent, decontaminate synergist, household cleaning agent and leaning agent for vehicle, public facility.
CAS No.:63148-62-9 Other Names:pdms MF:(CH3)3SiO[(CH3)2SiO]nSi(CH3)3 EINECS No.:63148-62-9 Purity:99.9% Place of Origin:Anhui, China Type:silicone oil, Chemical polymer Usage:Coating Auxiliary Agents, Electronics Chemicals, Leather Auxiliary Agents, Petroleum Additives, Surfactants, Water Treatment Chemicals Brand Name:ZINCA Model Number:ZINCA-z201 Product name:Polydimethylsiloxane Viscosity:50 100 350 1000 cst Apperance:Clear colorless liquid Keywords:Dimethicone Application:Cosmetics,hair, polish,lubricant, molding release etc. Sample:Availabe Storage:Cool and dry place
Silicone Oil is a non-hydrolyzed silicone surfactant with medium and high activity,used for soft polyurethane foaming.It is suitable for horizontal foaning ranging from low desity to medium desity. PL-5889 can be compatible with polyol mixtures and Various additives,to form a uniform nucleation system,the foam can form a fine and uniforma cell structure.meanwhile,it can ensure the normal foam permeability and provide high processing tolerance.
Silicon metal 521/421/3301, etc.
Descriptions: Silicon metal is also called industrail silicon or crystalline silicon. It is siliver gray with metallic luster,when be processed into powder the coloure si dark grey. It has high melting point,good heat resistance and high resistivity.It is usually used in electro, metallurgy and chemical industry.It is the dispensable essential raw material in the hi-tech industry. Features: 1.silicon is widely used in smelting alloy elements, as a reducing agent in many kinds of metal smelting. 2.silicon metal widely applied to refractory material and powder metallurgy industry to improve the heat resistance and oxidation resistance. 3.Inddustrial siliocn powder is regarded as alloy additive, impove the steel hrdenability in metallurgy and foundru industry. 4.It is mailnly used in production of alloys, polycrystalline silicon, organic silicon materials and high-grade refractor.
Appearance: powderPurity: 4N 5N 6N 99.99%Grade Standard: Industrial GradeCAS No.: 9035-99-8State: Solidcolor: yellow
Model Chemical Composition% Si Mg Ca Re Ba La Fe BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm Packing: 25kg woven plastic bag in 1mt jumbo bag. Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements. Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Model Chemical Composition% Si Mg Ca Re Ba La Fe BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm Packing: 25kg woven plastic bag in 1mt jumbo bag. Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements. Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Model Chemical Composition% Si Mg Ca Re Ba La Fe BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm Packing: 25kg woven plastic bag in 1mt jumbo bag. Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements. Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Item: OTT-S825 Mixing ratio:100:3 Color: White Hardness: 25;¨¤2 Viscosity (mPa.s):15000;¨¤3000 Working Time (25):20-40mins Curing Time (25):3-5h Tear-Strength (kN/m):;Y25 Tensile- Strength (Mpa):;Y4 Elogation (%):;Y500 Shrinkage(%):;¨¹0.2 1kg/tin 5kg/tin ;20kg/drum; 25kg/drum; ;200kg/drum
Green silicon carbide for refractories Green silicon carbide(sic) can also be used for refractory applications because of its high strength, low expansion rate and good thermal conductivity for refractory materials, special ceramics, coating and plastic fillings etc. Physical and chemical properties True gravity: ?3.15 g /cm3 Bulk density: 1.20-1.60 g / cm3 Mosh hardness: ?9 Color: green/light green Melting point: 2700 celcius degree Sizes: 0-1mm, 1-3mm, 3-5mm, 0-10mm etc. Applications of refractory grade green silicon carbide Products of various high grade shaped and unshaped refractory materials Used for semi-conductor deoxidizer Used as deoxidizer in steel making industry to improve quality and productivity of steel Production of silicon carbide rod in electric thermal industry
