Magnesium metal series including: Magnesium ingot, Magnesium granular, Magnesium powder, passivation Magnesium granular. Chemical composition: Mg;99.90%min, Mg;99.95%min ,Mg;99.99%min Magnesium Ingots : 15kg/pc 7.5kg/pc 1kg/pc Magnesium granular, Magnesium powder: 2mm-0.015mm Packing: 1000 kg per woven bag or up to customer's requirement. Application: metallurgical casting, Military industry and metal instrument manufacture, in desulfuration and producing of magnesium alloy, also can be used in chemical industry. Produce as customers requests.
Made of steeless 316, high polished.
Made of steeless 316, high polished. All kind of size.
Magnesium ingot: We can supply various kinds of magnesium related products .Such as magnesium ingot, magnesium alloy, magnesium granular(powder), etc. Magnesium ingot as below:(note:customers special request available!) Magnesium ingot Mg:99.9%min. Al: 0.02%max. Si 0.02%max. Mn 0.02%max. Magnesium ingot size: 7.5kg+/- 0.5kg High purity magnesium: Mg:99.95%min. Al: 0.0040%max. Fe 0.0045%max. Si 0.0070%max. Ni 0.0010%max. Mn 0.0070%max. Cu 0.0030%max. Magnesium ingot size: 7.5kg+/- 0.5kg Mg:99.99%min. Al: 0.0020%max. Fe 0.0045%max. Si 0.0020%max. Ni 0.0010%max. Mn 0.0020%max. Cu 0.0020%max. Magnesium ingot size: 7.5kg+/- 0.5kg Magnesium alloys such as : Az91d, az91hp , az63 , za10, am60, am50, am20, ze41a and so on with the standard of gb/t5153-2003, gb/t19073-2003 and astmb94-92. Magnesium ingot size: 7.5kg+/- 0.5kg Packed on pallets with plastic covering and steel tape to tighten
Usage: used in electro, metallurgy and chemical industry. 1. Widely applied to refractory material and power metallurgy industry to improve the heat resistance, wear resistance and oxidation resistance. Products made of it are applied in steel smelting furnace, kiln hood and kiln furniture etc. 2. In the chemical line of organic silicon, industrial silicon powder is basic raw material that high polymer of organic silicon formatting. Such as using for producing organic monomer, silicon oil, silicon rubber antiseptic to improve the characteristics of insulating, corrosion-resistance and waterproof performance etc. 3. Industrial silicon powder is sublimated into monocrystaline silicon, which is widely used in hi-tech field as an essential raw material for integrated circuit and electronic element. 4. In metallurgy and foundry line, industrial silicon powder is regarded as to be iron base alloy additive, the alloy pharmaceutical of silicon steel, thus improve the steel hardenability (1)no mark or mark as client's requirement (2)1mt/bag or as client's requirement (3)plastics woven bag
Characteristics: High saturation flux density High permeability Low coercive force Low core losses(1/3-1/5 of silicon steel) Low excitation current Good thermal stability and aging stability.
The material replaces silicon steel and its operating frequency can be up to 50Hz to 10KHz in case of working as various high and medium frequency transformer cores of different power. Working as high power switched mode power supply reactor cores, the operating frequency can be up to 50KHz.It is applicable in fields of high and medium frequency heating power supply, transformers of inverter welders, UPS, power transformers, switched power supply transformers and high energy accelerators etc. Cartons
The advancement in technology of high frequency inverters has culminated in several advantages. Some of those incl ude the physical size of the inverter being smaller, a lighter weight of the individual unit and a higher efficiency of the working unit. The main transformer is heart of a power inverter, with a working frequency up to more than 20kHz. The transformer, in the past, was made from a core of silicon steel, but that can no longer meet the technical requirements of today's industrial and technological world. Though Ferrite has a lower loss at high frequencies, but it has a lower saturation flux density and not much reduction in volume and weight, further more, the ferrite metals have lower curie temperatures and less thermal stability. In contrast, Fe-based nano-crystalline structure material has much better magnetic properties. This material integrates the advantages of silicon steel, NiFeNb alloy and ferrite resulting in high flux density, high permeability, low currency loss, and good thermal stability, making it the best material for manufacturing power inverter cores.
Characteristics: High saturation flux density High magnetic permeability Low coercive force Low core losses Good thermal stability Wear and corrosion resistant High cost efficiency. Spools and cartons
Ferro Alloys Fesi (ferro Silicon) Size (mm): 20~50 = 90%.
The product is used as compound deoxidizer, desulfurating agent and alloying agent in the steel-refining industry and as a reducer in the producing low-carbon ferromanganese.
Our mainly export 75# & 72# fesi or other spec by buyer's option.We has already carried out steady operation in over 20 countries and regions, and have got many good opinions from new and old customers. Fesi75:si:75% al:2.0% max mn:0.4% max. P;0.04% max
Implementing standard:yb/t.066-1995
C17300 leaded beryllium copper.
CuCr1Zr UNS.C18150 Chromium Zirconium Copper C18150 is an excellent and unique copper alloy with high electrical conductivity, hardness, and ductility, moderate strength, and excellent resistance to softening at elevated temperatures. The addition of 0.1% zirconium (Zr) and 1.0% chromium (Cr) to copper results in a heat treatable alloy which may be solution treated and subsequently aged to produce these desirable properties. Rod is usually supplied from the mill in the fully aged and drawn condition so no further heat treatment is required by the fabricator. The softening temperature of properly heat treated C18150 rod exceeds 500ípC as compared to unalloyed pure copper which softens at 200ípC, and silver bearing coppers which soften at 350ípC.
Titanium & titanium alloy Tiatnium bar / rod from 2.0mm - 250mm Titanium plate / sheet Titanum tube /pipe Titanium wire / welding wire Grade: Gr1, Gr2, Gr3, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr15, Gr17, Ti6Al4V ELI, Ti3Al2.5V Standards: as per ASTM, AMSE, AMS etc Standard exporting package
Annular bulk head
This is a type of product can be use in forging and casting alloys welding due to it has silicon of 5% with the good performance in anti-thermalcrack Mig-wires(mm)í¡0.8;0.9;1.0;1.2;1.6;2.0;2.4 Tig-rods(mm)í¡1.6;2.0;2.4;3.2;4.0;5.0;6.0
Aluminum alloy welding wire er4047 This is a type of aluminum alloys wires containing approximate 12% silicom, which can be adopted in welding all kinds of forging and casting or extruded shape aluminum alloys. And it has advantages of low melting point and good fluidity which avoides the distortion after welding Mig-wires(mm)í¡0.8;0.9;1.0;1.2;1.6;2.0;2.4 Tig-rods(mm)í¡1.6;2.0;2.4;3.2;4.0;5.0;6.0
This is a type of product is a widely used in general welding material with the magnesium of 5%, which can be use in jointing oe overlay forging and casting alloys processing.And this product is of high toughness, good forgeability, and well anti-corrosiveness. Furthermore, this is a good chioce for colour-match in welding after anodic process. Mig-wires(mm)í¡0.8;0.9;1.0;1.2;1.6;2.0;2.4 Tig-rods(mm)í¡1.6;2.0;2.4;3.2;4.0;5.0;6.0
