Material: paper rope. Size: A set include 3 pieces , one big , two small Large--24*17*11cm, small--15*10*10cm.
Copper Free Mirror A copper free silver mirror is a type of mirror that does not contain copper in its reflective coating. Traditional mirrors use a silver coating that is backed with a layer of copper to protect it from tarnishing. However, copper can eventually react with the silver and cause the mirror to discolor. Copper-free mirrors, known as lead-free mirrors, offer several features and benefits compared to traditional mirrors that contain copper in their backing. copper-free mirrors offer a safe, environmentally friendly, and durable alternative to traditional mirrors, making them a preferred choice for various applications where quality, longevity, and safety are paramount.
A4 copy paper slitting machine, chm-a4-2/4/5 a4 copy paper production line spiral groove, with no backlash gear, to achieve the world's most advanced double synchronous cutting synchronization of new technology. It is a copy paper processing equipment which can make the paper cut, pack and make the paper packing box automatic. Cutting type: a4-4/5 Paper width: 845-850mm Production speed max 450m/min Precision: +0.2mm No.Of paper rolls 2rolls No.Of cuttings 2cutting Ream output: max 16 reams/min Power 23kw+18kw Dimencisions(l*w*h) 9383mm*6875mm*6733mm
Main features: 1. The rotary disc is connected with the spline on the main shaft to ensure the pressure balance of the two grinding areas; 2. Mechanical seal and reliable sealing 3. Adopt electric, manual feed, convenient operation 4. The quality of pulping is stable, uniform and effective The device is widely used for straw pulp,waste paper pulp,the commodity striking pulp with the manual,electric operation automatical control system.It will realize constant energy consumption control or constant power control mode to strike pulp.accordingly,the striking effect will be ensured stanblity.
Application: the machine is made of special alloy steel with special alloy steel, and the material is very durable. The bottom knife adopts turbulent design to improve dissociation ability. Rotary knife adopts high reflow umbrella vortex design for various types of pulp board and waste paper. Intermittent operation, especially suitable for waste paper with high wet strength.
Use: used for shredding the pulp board, paper machine under the damaged paper and all kinds of waste paper Structural characteristics: can be used according to the raw materials of the corresponding operation mode, the use scope is wide Specification: 2m3-7m3 processing capacity: 15-600tpd
Use: used in the deinking process for the high concentration of waste paper Structural features: Compact structure, high rotation efficiency Three wire helical rotor tower type, can effectively promote the pulp cycle, increase the friction between the pulp fiber, which can realize high concentration of mild beating, relief fiber cloth broken impurities at the same time.
The working part is divided into cylindrical shape, and the whole sieve is revolving around the axis of the cylinder, and the axis is generally installed as a small angle. The material is fed from one end of the cylinder, the fine grade material is passed through the sieve hole of the cylinder work surface, and the coarse material is discharged from the other end of the cylinder. Cylinder sieve has low speed, stable work and good dynamic balance. But its screen is easy to clog, the screening efficiency is low, the work area is small, the productivity is low. Concentrator is rarely used as screening equipment. Application: Yts is usually device in pulp or magazine after centrifuges, it can screen out all kinds of light or heavy impurities whosee geometric shape are greater than 10mm such as plastics, rubber, sand, stone, metal pieces, film, etc. Design f eature: Yts is series drum screen consists of drum, belt driving device, catch wheel, drawing wheel, vat, inlet trough, spravy pipe, etc.While the screening drum rotates, pulp is conveying forword to the drum cylinder by screw flight.By gravity, accept and fine impurities passing though 8-14mm screening slots enter the vat.The fiber adhered to the impurities retained on screen plate is pushed forward to the end by screw flight.The fiber adhered to the impurities is wash off by fan nozzles in order to prevent fiber loss with impurities discharging. Simple structure , safe and reliable in operation and high effciency in coarse screening. Used with hydrapulper system to screen out coarse impurities and improve the purifying efficiency of process.
Benefits Cleaner pulp High processing capacity Low operating costs Products Scope: Pore size deviation:+-0.05mm Chroming thickness is 0.20-0.30mm Plate area:0.40-23m2
1. The pressure screen adopts the structure design of the bottom, bottom discharge slag and top row slag, which effectively solves the above problems. Light impurities and the air in the slurry naturally rise to the top discharge outlet, the heavy impurities enter the body to the bottom out. In this way, on the one hand, it can effectively shorten the residence time of impurities in the sieve area, reduce the possibility of impurity circulation, and improve the screening efficiency. On the other hand, it can prevent the damage caused by heavy impurities to the rotor and sieve drum, and prolong the service life of the equipment. 2. Structural characteristics 1, sieve drum: fine sieve drum sieve sieve seam width h0.15 mm, use water jet cutting technology grooving on 8 mm thick steel plate, no burr forming excellent round hole and slot, won't produce stress and like mechanical washing grinding groove groove end fracture. It can also provide hard contact process to improve wear resistance. 2. Rotor rotor: the rotor is equipped with 3-4 rotor blades, and the balance is strictly calibrated after assembly. It is the rotor that does not produce vibration when rotating at high speed. The rotor is mounted on the main shaft, and the rotor is mounted on the rotor through the screw rod. The gap between the rotor and the sieve drum can be adjusted. The coarse - screen rotor adopts drum - type external rotary-wing structure and corrects dynamic balance. This structure prevents the impurity winding rotor from affecting the normal work of the equipment. 3. Outer shell: consists of upper cover and barrel body. The lower part of the tube is cut into the plasma pipe. The center of the barrel is provided with a slurry pipe. The top cover is equipped with a slag drain and a flushing nozzle. 4. Transmission device: including motor, pulley, v-belt, belt tensioning device, spindle and bearing. Process customization: brand: Model: uv102 material: stainless steel
Work environment - 20 â?? ~ + 120 â?? temperature conveying speed of 0.4 m to 15 m/min maximum weight 800 kg/m2 Chain material: carbon steel, stainless steel, thermoplastic chain, according to the needs of your product to different width, different shapes of chain plate to complete the plane transport, plane, ascending, decline, etc. Chain plate specification: the width of the straight chain plate is 63.5, 82.5, 101.6, 114.3, 152.4, 190.5, 254, 304.8. The width of the turning chain is 82.5, 114.3, 152.4, 190.5, 304.8. Features: 1. The conveyor surface of the chain conveyor is smooth and smooth, the friction is small, and the material is excessive and stable between the conveyor line. 2. The chain has stainless steel and engineering plastic materials, which can be selected according to the conveying materials and process requirements, which can meet different needs of different industries. 3. Large conveying capacity can carry a large load 4. The conveying speed is accurate and stable, ensuring accurate synchronous delivery
Powerline UNO is the prevailing and most widespread type of braided coreless paper carrier rope.It is made of multifilament polyamide fibre with special impregnation.It is characterized by easy splicing,high abrasion resistance and temperature resistance,as well as durability in drying sections. Paper carrier tape is braided by special fibre,which is characterized by high abrasion resistance and temperature resistance.It can be produced by customer's requirement,such as width,thickness and length. Flexible sling is the best equipment to lift and carry scroll.It has the unique soft protector,which can avoid scrol from being damaged.It can be produce by customer's requirements,such as length and string with different weight capacity. The paper carrier rope is made of multifilament polyamide fibre with special impregnation-supercoating,featured with low elongation and low abrasion
Material: stainless steel the density of the slurry is different from the slurry impurities Slag separator, it is a kind of using the theory of centrifugal to get rid of slurry density is different from the pulp of impurities of equipment, upper slag machine adopt stainless steel material, lower injection for polyurethane material, main wall designs for the spiral cone. Slag separator can be used in all kinds of pulp purification system, mainly to remove slurry density is greater than the size of sand, iron and other impurities (heavy slag) clock and density is less than the size of such as mixed sticky powder, paraffin wax, heat melt glue, plastic, foam, gas, light impurities such as ink particles (light slag separator). Low concentration slag eliminator: TH series of low-concentration slag separator is the principle of centrifugal separation of eddy current. The slurry of the pressure can be entered from the inlet of the cutting edge in the direction of the tangential direction, and the eddy motion of high speed in the cone is separated. The vortex in the axial direction of the separation tube is led to the end of the cone, and the heavy impurities in the slurry are thrown into the wall of the wall and discharged from the lower end. The slurry gathers to the center of the separation tube and forms the main slurry flow, which is sent out from the upper part of the slurry to the next process. Structure that 1. The TH heavy slag removal device can be designed to be open and closed in two types of scum based on user requirements. 2. There are three kinds of arrangement of TH heavy slag eliminator: single - sided, single - sided and double - sided. 3. The TH heavy slag can be designed for more than one stage according to the production and user's requirements, and can be designed for multi-stage multi-stage in special circumstances. 4. The TH heavy slag eliminator is generally supplied in bulk, and the user can assemble and use it according to the arrangement form. Its main parts are in and out of the slurry main body, frame, slag removal, tail slurry (pipe), pressure gauge, ball valve, ceramic scum, etc.
Series type D waterpower pulp machine is mainly used for OCC, intermittent or continuous pulp products such as waste paper, sedimentation in the heavy impurities in a separate waste emissions, prevent damage of equipment by heavy metal, plastic and can be ruled out. The d-type series hydraulic pulping machine is based on the existing traditional vertical shredder based on the foreign information design. Its main characteristic is: vex rotor deviation center position, make the pulp and rotor contact more quickly, more frequency. Traditional waterpower pulp machine to produce a rotary flow unimpeded, paper material from join according to spiral line to the center of the rotor in sports, and type D hydrapulper has changed the way of the flow, make the paper material more quickly in contact with the rotor, which can shorten the paper into pulp material handling time, and without any increase in power and volume under the condition of increasing production capacity. Type D series waterpower pulp machine is equipped with a general twisted rope machine and sediment well, twisted rope machine can remove tangling impurities, such as plastic bags, rope, wire, recommend to the twisted rope of maxhine ZTS1, tub at the bottom of a rectangle interface, the pick up sediment Wells by impurity separator to remove the plastic foam and other impurities, realize the continuous production, sediment at the bottom of the well sedimentary heavy impurities regularly. The interface can also be used only for batch production 2. Structure principle D type hydraulic shredder is mainly composed of D type tank, rotor and pulping disk, bracket, motor and protective cover. Pulper tank affusion 1/2 solutions, start the motor, pulp board, damaged paper or paper evenly into the tub, the rotor rotates, slurry from the center to throw around, in its at the center of the vortex, slurry by the strong hydraulic shock and shearing action, produce intense friction and gentle rub each other, at the same time due to the effect of impact of the rotor to make pulp board, damage of paper under the wet pulp, dissociated into single fiber, separation by organization of the pulp flow through the screen mesh, foreign body, heavy slag collection in sediment tank regularly; In continuous operation, the foreign body and heavy slag enter the sediment well, and the impurities are treated by the impurities separator. Because of the special structure, the series of waterpower pulp machine tub when the rotor rotation, slurry flow by the tub D shape face block bends to the center, shortened the slurry return path, pulp by beating frequency is higher. Unbroken pieces of paper and fiber bundles are further unsolved in the gap between the rotor and the screen. Because of the special shape of the tail of the blade, it has the function of keeping the mesh not blocked. It can greatly prolong the continuous running time and improve the working efficiency.
Item: Paper Cup Fan, Paper Cup Sheet, Paper Cup Roll Material: 100 % virgin wood pulp PE coating: Single PE or Double PE Printing: Flexo-graphic Printing, Offset Printing Type: Net fan, Sheet, Roll Color: Black, Red, White, Yellow or customized as artwork. Application Area: Family, Office, Party, Meeting, Restaurant, Entertainment, Advertisement, etc. Size: 2.5 OZ, 3 OZ, 4 OZ, 6 OZ, 7 OZ, 8 OZ, 9 OZ, 10 OZ, 12 OZ, 16 OZ, 20 OZ, 24 OZ or customized. Feature: Disposable, Eco Friendly, Biodegradable, waterproof, economic. Purpose: Disposable Paper Cup, for coffee, milk, tea, water, ice cream, fruit juice, etc.
Item: PE Coated Paper Cup Stock, Raw Material Roll, Paper Cup Bottom Roll, Paper Cup Paper Material: 100 % virgin wood pulp PE coating: Single PE or Double PE Printing: Flexo-graphic Printing, Offset Printing or without Color: Black, Red, White, Yellow or customized as artwork. Application Area: Family, Office, Party, Meeting, Restaurant, Entertainment, Advertisement, etc. Feature: Disposable, Eco Friendly, Biodegradable, waterproof, economic. Purpose: Disposable Paper Cup, for coffee, milk, tea, water, ice cream, fruit juice, etc. Place of Origin: China
500ml/650ml/750ml
Baskets.
Scissor lifts, aerial work platform, access platform, hydraulic driving self-propelled scissor lifts.
Corrugated plastic box are made of corrugated plastic sheets. Corrugated plastic sheets are sheeting extruded from polypropylene. It is more durable than corrugated fiberboard, but lighter in weight than wood and solid PVC sheets. Its fluted ribs support both surfaces, making it lightweight, tough and abuse resistant. It's also chemical and water resistant, making it an ideal choice for numerous commercial and industrial applications. Especially for corrugated plastic box. Material: PP Thickness: 2-12mm Size: Customized Size Colors: White, black, yellow, blue, green, red, customized color Usage: Packaging and storage , turnover Feature: Eco-friendly, waterproof, Good Toughness, high strength, super light
