Technical Parameters Lifting capacity10t Track distance12m Lifting height6m Maximum wheel pressure102kN Speed Lifting speedm/min0.5~5 Small car speed m/min0~20Frequency conversion Large car speed m/min0~30Frequency conversion Electric Hoist TypeNWH 1000-9NOVOCRANES Motor power13kwNOVOCRANES Small car power0.95 kw*1NOVOCRANES Dimensions 266mmFrom wheel to top of hoist Dimensions 495mmFrom wheel to hook center Working class FEM/ISO 2M/M5 End beam running Large car reducerFA-37Bo neng Large car motor power0.75kw*2Bo neng Wheels diameterÎ 240- Wheels distance2500mm Metal structure Main beam height600mmQ345 Main beam cover-6mmQ345 Bottom plate-mm6Q345 End beam3000*220*360 mm Machine working class2M M5 Track type of large car(recommendation)P22 Operation methodRemote operation Power36v 380V 50Hz
Technical Parameters Lifting capacity10t Track distance7.5m Lifting height 9m Maximum wheel pressure65kN Speed Lifting speed m/min0.5~5 Small car speed m/min0~20Frequency conversion Large car speed m/min0~30Frequency conversion Electric Hoist TypeNWH 1000-9NOVOCRANES Motor power13kwNOVOCRANES Small car power0.95 kw*1NOVOCRANES Dimensions 266mmFrom wheel to top of hoist Dimensions 495mmFrom wheel to hook center Working class FEM/ISO 2M/M5 End beam running Large car reducerFA-37Bo neng Large car motor power0.75kw*2Bo neng Wheels diameterΦ240- Wheels distance2500mm Metal structure Main beam height600mmQ345 Main beam cover-6mmQ345 Bottom plate-6mmQ345 End beam3000*220*360 mm Machine working class2M M5 Track type of large car(recommendation)P22 Operation methodRemote operation Operation methodRemote operation Power36v 380V 50Hz
1.The rated load moment of QTZ63 tower crane is 630KN. m, the maximum lifting weight is 6T, and the maximum working range is 50 meters. The end lifting weight is 1.3T. 2. The lifting height of QTZ63 tower crane can be41.4 meters when standing stationary alone, and 152 meters when anchored, suitable for the construction of buildings lower than 50 floors. The structure of this tower cranes is rational, for the main functioning steel parts, such as the tower and the crane, are made up of seamless steel tubes with proper hardness, little wind resistance and a pleasant appearance The rated load moment of QTZ63 tower crane is 630KN. m, the maximum lifting weight is 6T, and the maximum working range is 50 meters. The end lifting weight is 1.3T.
This timber crane arm is outward folding structure, installed on all kinds of single model for timber and log transport vehicles. The crane has simple structure, small size, large torque, high strength, and strong operating performance. It can achieve the purpose of quick loading and unloading timber. Hydraulic grabs and other components can use imported configuration. New products series also developed a remote control and industrial wireless control for optional, which improves the safety of personnel. Main technical specifications Max lifting moment m8 +min operating amplitude mm3000 +max operating amplitude mm7600 +max lifting height mm13.650 Rotation range 400 Amplitude range -23~80 Max rated lifting capacity kg 2500 Installation space m1.5 Max pressure of hydraulic system mpa31.5 Max oil flow of hydraulic systeml/min 80~110 Recommend power needed at recommend oil flow kw37 Weight (no grab)kg 1830
Cpcd25f diesel powered forklift Load capacity : 2500 kg Lifting height : 3000 mm Total weight : 3620 kg Overall dimensions: 3450f¯1150f¯ 2070 mm Fork length: 1070 mm Fork width: 100 mm Fork thickness: 40 mm Engine model: chinese engine model a490bpg Power: 37kw, isuzu engine optional Power shift: tor-con. Non-packed.
Cpd30c battery powered forklift Load capacity : 3000 kgs Lifting height: 3000 mm Load center : 500mm Total weight: 4900 kgs Overall dimensions: 2790f¯1225f¯ 2200 mm Power type :battery Max.Travelspeeds: 14km/h Min.Turning radius: 2350mm Front tyre:28f¯9-15 Rear tyre:18f¯7-8 Traction motor:xq-10 -1c Lifting motor:xqd-13-3s Battery model: d-500 (made in china) Battery voltage/capacity:80/500 v/ah Non-packed
Cpqd20f lpg & gasoline powered forklift Load capacity : 2000 kg Lifting height : 3000 mm Total weight : 3320 kg Overall dimension : 3470f¯1160f¯ 2095 mm Fork length: 1070 mm Fork width: 122 mm Fork thickness: 40 mm Engine model: mitsubishi 4g 64 -312g (made in japan) Power: 38kw Power shift: tor-con Non-packed
Cpqd30f lpg & gasoline powered forklift Load capacity : 3000 kg Lifting height : 3000 mm Total weight : 4320 kg Overall dimensions : 3790íß1228íß 2110 mm Fork length: 1200 mm Fork width: 125 mm Fork thickness: 45 mm Engine model: mitsubishi 4g 64-31zg (made in japan) Power: 38kw Power shift: tor-con
Cpqd35f lpg & gasoline powered forklift. Load capacity : 3500 kg Lifting height : 3000 mm Total weight : 4580 kg Overall dimensions : 38101236 2110 mm Fork length: 1200 mm Fork width: 125 mm Fork thickness: 45 Engine model: mitsubishi 4g 64 -312g (made in japan) Power: 38kw Power shift: tor-con
Crane
Mast section specifications are devided into three specifications as follows:800*800*1508, 650*650*1508 and 900*650*1508.Types of structure have SCD dual drive,counter weight,no counter weight of SC treble drive,GN3,upper-setting and frequency conversion control,etc,varieties. The equipment is applicable to bridges,chimneys,mansions of more than 60m,etc,construction staff and material handling of tall building,also which is used for warehouse and wharf,etc places and for vertical transportation too.
Main parameters of qtz63 Rating load moment 630 kn.M; max.Load capacity:6t; max.Radius:50m; ratad roadcapacity at max.Radius:1.3t; independent height:40m; trolley speed: 21/42m/min; hoisting speed:8/40/80m/min(a=2); swiveling speed: 0.6r/min ; climbing speed:0.4m/min; motortotal power: 36.4kw; working volt: ~380vfa5% 50hz; working temperature: -20f¦f++40f¦
Tower crane
Fixed Tower Crane with Maximum Load of 2.5t and Working Radius Ranging from 2.5 to 35m Model Number:QTG25(3508) Key Specifications/Special Features: ò Jib radius: 2.5 to 35m ò Maximum load: 2.5t ò Load at jib nose: 0.8ton ò Radius with maximum load: 13.6m ò Freestanding hoist height: 25m ò Suitable for small buildings Container
Self-erecting Tower Cranes, Max. Load 25t and 0.81t at Jib Nose of 35m Model Number:QTZ25(3508) Key Specifications/Special Features: ò Model: QTZ25(3508) ò Jib radius: 2.5 to 35m ò Max. load: 25tons ò Load at jib nose: 0.81 tons ò Radius with maximum load: 13.6m ò Hook height (independent): 25m Container
Main parameters of qtz 80/100/125/160 series of the tower crane : Rating load moment :800/1000/1250/1600kn.M, max.Road capacity:6/8/10t, max.Radius:56/60/65m, ratad road capacity at max.Radius:1.3/1.5/1.6t, independent height:45/50/51.8m, attached height:150/120/163/200m, trolley speed: 21/42/7.5/30/60m/min, hoisting speed: (a=2)ú¦8/40/80, 25/50/100, 35/73/100m/monú+(a=4):4/20/40, 12.5/25/50, 17/36/55m/min, swiveling speed:0.6/0.62r/min climing speed:0.4/0.6m/min, motor total power:36.4/19.7kw, working volt:380vía5% 50hz, working temperature: 20íµí++40íµ
XCMG QY130K truck crane QY130KTruck Crane is a new large-tonnage mobile crane researched and developed by our company. Six-axle carrier with three for drive and four for steering, has good off-road capability; optimized oviform boom profile has excellent lifting capacity; control system with program logic controller (PLC) reliable and precise; application of new technology such as self-erecting combined counterweight, tilt-able operator's cab greatly improves the whole performance, and makes operation more comfortable and convenient. This truck crane is suitable for lifting operation and installation work in plants, mines, ports, construction sites, etc.The features of the machine as follows:1.Compact structure, reasonable arrangement, wide outrigger span, and 360º operation of the boom.2.Six-axle off-road carrier equipped with imported Cummins engine and automatic transmission, max. grade-ability of 40%; maneuverable steering system, good pass-ability, min. turning diameter of 24m.3.Lifting operation is controlled by integrated PLC for construction machinery. Control signals and operating performance chart of parts can be set and adjusted with digit. Working safety, reliability and efficiency are improved greatly.4.Electric control outriggers leveled by button, and accelerator speed-up button improve working efficiency greatly.5.6-section boom of oviform boom profile, special blocks and aligning devices and imported high-tension steel plates, minimize the boom weight, make boom telescope smoothly and align accurately and improve the lifting capacity greatly.6.Euro==engine for construction machinery equipped on superstructure smooth running, lower noise, powerful output and suitable for continuous work of long time.7.Self-erecting counterbalancesf¼can be variously combined to meet various working requirements. Various combination of counterweight improves the lifting capacity of mid-extended boom. Movable control box facilitate operation of counterweight.8.Hydraulic system is a constant power and variable displacement system of cost energy and high efficiency. Combined with PLC, it can adjust flow and pressure of the system according to the change of load automatically, control speed precisely and sensitively.9.Comfortable operator's cab with integrated front and roof windows, air-conditioning, roller blinds, adjustable operator's seat, noise and heat insulation, and can be tilted backwards 20fp.10.Optional central lubrication system. During operation, it will lubricate main positions automatically according to the preset time interval. Max.total rated lifting load: 130T Max.lifting height: 86m Full-extend boom lifting height: 58m Air conditioner LxWxH: 14.95x3x3.95m
Model:qtz125 basic height(m):50 maximum height(m):200 jib length(m):65 main specifications steel string(mm):12512514+ festival standard specifications(m):1.8351.8352.5
Detailed product description and specifications: 1.Rating moment:1250KN.M 2.Max. Lifting capacity(The end lifting weight):10T 3.Max. Working range:65m 4.The end lifting weight is 1.6T 5.The lifting height is 50m when freestanding(suitable for the construction of buildings lower than 16 storeys),and can reach 100m (at ratio 4) and 163m(at ratio 2) when adhered (suitable for the construction of buildings lower than 32 and 52 storeys respectively). 6.The lifting height of QTZ125.The structure of this tower cranes is rational,for the main functioning steel parts,such as the tower and the crane,are made up of seamless steel tubes with proper handness,little wind resistance and a pleasant appearance. 7.QTZ125 tower crane adopts the jinkui brand electric parts which are famous in China.These high-quality parts can serve for a long time,reducing breakdowns and improving efficiency. 8.QTZ125 tower crane has helmet structures with two hoisting points,hoists with upper slewing liquild pressure,and it can be installed quickly and conveniently. Festival standard specifications(m):1.835í-1.835í-2.5
Detailed product description and specifications: 1.Rating moment:1000KN.M 2.Max. Lifting capacity(The end lifting weight):8T 3.Max. Working range:56m/60m 4.The end lifting weight is 1.5T/1.2T 5.The lifting height is 50m when freestanding(suitable for the construction of buildings lower than 16 storeys),and can reach 100m (at ratio 4) when adhered (suitable for the construction of buildings lower than 32 storeys respectively). 6.The lifting height of QTZ100.The structure of this tower cranes is rational,for the main functioning steel parts,such as the tower and the crane,are made up of seamless steel tubes with proper handness,little wind resistance and a pleasant appearance. 7.QTZ100 tower crane adopts the jinkui brand electric parts which are famous in China.These high-quality parts can serve for a long time,reducing breakdowns and improving efficiency. 8.QTZ100 tower crane has helmet structures with two hoisting points,hoists with upper slewing liquild pressure,and it can be installed quickly and conveniently. Festival standard specifications(m):1.835í-1.835í-2.5
