Advanced sideway 5 supporting points crank, double columns.
Xps foam board production line Model: pts135-150-xf Output: 300 - 350 kg/h or 180 - 200 m3/24h Model: pts150-200-xf Output: 400 - 550 kg/h or 300 - 320 m3/24h Product: extruded polystyrene (xps) foam board Board width: 600 mm, 900mm, 1200mm after trimmed. Board thickness: 20mm--100mm Density: 30-40kg/ m3 Material: polystyrene(ps) Blowing agent: freon(hfc, hcfc, co2) Standard configration 1 mixing system 2 feeding system 3 primary extruder 4 metering pump 5 hydraulic screen changer 6 secondary extruder 7 slot die 8 oil temperature controller 9 board calibrator 10 first haul-off system 11 take-off system 12 cut-to-width system 13 second haul-off system 14 cut-to-length system 15 electrical control equipment * margin recycle system (ptrecyclertm) * optional finishing machines 1 embossing unit 2 planer (rough; fine) 3 groover (straight; dovetail) 4 edge trimmer (sl; rc; tg) 5 slice cutting machine 6 aluminium foil composite machine Painted with anti-corrosion oil, and covered with plastic film, then packed in wooden box. 1 set in three 40' containers.
Model: pts135-150-xf Output: 200-400 kg/h or 180...200 m3/24h Model: pts150-200-xf Output: 450-600 kg/h or 300-320 m3/24h Product: extruded polystyrene (xps) foam board Board width: 600 mm, 900mm, 1200mm after trimmed. Board thickness: 20mm--100mm Density: 28-40kg/ m3 Material: polystyrene(ps) Blowing agent: freon(hfc, hcfc, co2). 3 pcs of 40 feet container.
Xps production line Model: pts135-150-xf Output: 300 - 350 kg/h or 180 - 200 m3/24h Model: pts150-200-xf Output: 400 - 550 kg/h or 300 - 320 m3/24h Product: extruded polystyrene (xps) foam board Board width: 600 mm, 900mm, 1200mm after trimmed. Board thickness: 20mm--100mm Density: 30-40kg/ m3 Material: polystyrene(ps) Blowing agent: freon(hfc, hcfc, co2) Standard configration 1 mixing system 2 feeding system 3 primary extruder 4 metering pump 5 hydraulic screen changer 6 secondary extruder 7 slot die 8 oil temperature controller 9 board calibrator 10 first haul-off system 11 take-off system 12 cut-to-width system 13 second haul-off system 14 cut-to-length system 15 electrical control equipment * margin recycle system (ptrecyclertm) * optional finishing machines 1 embossing unit 2 planer (rough; fine) 3 groover (straight; dovetail) 4 edge trimmer (sl; rc; tg) 5 slice cutting machine 6 aluminium foil composite machine Painted with anti-corrosion oil, and covered with plastic film, then packed in wooden box. 1 set in three 40' containers.
XPS insulation line Model: PTS135-150-XF Output: 300 - 350 kg/h or 180 - 200 m3/24h Model: PTS150-200-XF Output: 400 - 550 kg/h or 300 - 320 m3/24h Product: Extruded polystyrene (XPS) foam board Board width: 600 mm, 900mm, 1200mm after trimmed. Board thickness: 20mm--100mm Density: 30-40kg/ m3 Material: Polystyrene(PS) Blowing agent: Freon(HFC,HCFC,CO2) Standard configration 1 Mixing system 2 Feeding system 3 Primary extruder 4 Metering pump 5 Hydraulic screen changer 6 Secondary extruder 7 Slot die 8 Oil temperature controller 9 Board calibrator 10 First haul-off system 11 Take-off system 12 Cut-to-width system 13 Second haul-off system 14 Cut-to-length system 15 Electrical control equipment * Margin recycle system (PTRECYCLERTM) * Optional finishing machines 1 Embossing unit 2 Planer (Rough; Fine) 3 Groover (Straight; Dovetail) 4 Edge trimmer (SL; RC; TG) 5 Slice cutting machine 6 Aluminium foil composite machine painted with anti-corrosion oil, and covered with plastic film, then packed in wooden box. 1 set in three 40' containers.
Model: CN-psb6000 Mould size: 6060x1240x630mm Block size: 6000x1200x600mm Block density: 10-30kg/l Around 15 mins per cycle at density 15kg/m3 140 m3/8hours Steam consumption: 15-18kg/m3 Supply steam pressure: 6 bars Power: 11kw, actual power consumption :7 kwh 50hz, 380v Overall weight: 9500kg Dimension: 9100x2500x3100mm
Plastic blow machine.
Shuttle machine with shaft & oven size as customer request
SP series full-automatic PET stretch blow molding machine is the most stable two-step automatic stretch blow moulding machine. It has one to four cavities and the maximum capacity of the products is 2L. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
SP22-V stretch blow molding machine is specially designed to produce 5-gallon bottle and 25L wide mouth jar. Its output is up to 90 BPH for 5-gallon bottle and even could reach 120 bottles per hour in certain case. SP22-V consists of main unit and rotary infrared heater. The ordinary quartz lamp cannot heat preform ideally because the preform wall is excessively thick. The infrared heater with high penetrative force can heat the inside and outside of preform simultaneously and keep preform in even heating, therefore high shaping quality. What an operator should do during production is just to put heated preform into the blow mold and press the switch, and then computer will take care of the whole procedure.
Length of vacuum sizing spraying tank (mm): 4000-6000 Total power (kw):50-280.
1. Every kind of specification foam products with little water, high molding speed, low energy consumption, and stable size. 2. Can carry out four kinds of movements-full-automatic, center startup and handle operation. 3. The air-move drawing of patterns, the position of the drawing of patterns can be done the tiny adjustment with the products' thickness. 4. Three kinds of safety protecting apparatus-fire door panel lock, pause switch, urgent stop, undertake the operation safe and dependable. 5. The touching screen display, the sketch interface, Chinese show, and the soft button, the method of the conductive pillar. 6. The moving template separates the guide and heavy, and consumedly prolonged the life of the conductive pillar. 7. The craft of optimal molding, makes the equipments contain good usage function. Qualified relate of product is over 98%, satisfies the produce need of different sizes of EPS products ,the molding speed is 20-60 mold per hour. 8. Three canals dependent pollutant emission technique, affix mold, moving mold and the vacuum system dependent pollutant emission, makes cooling off and pollutant emission easier and sooner. 9. The main elements of the machine (CPU module, touching screen, the air-move part, the liquid press part, vacuum pump) adopt the international or local well-known brand. 10. The parameters of different mold product technology are remembered by the computers, can be used anytime. 11. The process of produce can managed and controlled by computers: the high automation degree, easy to operate, instant to maintain, good work environment, little work pressure for workers.
Plastic extruder 10 ton 15 meter
Plastic extruder 10ton 15meter
Shuttle rotational equipment is mainly made up of one central oven and two movable carts, and the two carts work separately and do not intervene each other. It makes many kinds of plastic products.
Rotational moulding machine.
PVC sheet extrusion line.
This machine is called also 3D machine,3D machinery, 3D panel machine, 3D board machine . 1. Dimension of 3d panel2450-4500mm*1200mm*70-120mm(Thickness of EPS panel:50/80/100mm) 2. Production efficiency5.5s/step or 78m2/h(for parse insertion) 3. 5s/step or 48m2/h(for dense insertion) 4. Steel wire diameterª¦1.8mm-ª¦3mm 5. Power supply380V 50HZ 6. Main equipment dimension : 4200mm*1850mm*2600mm(L*W*T).
Description: Technical parameters : Chamber diameter : 1200mm Chamber height : 3300mm Steam pressure(saturated) : 0.6Mpa Compressed air pressure : 0.6Mpa First expansion density : 10-40kg/m3 First expansion capacity : 250-500kg/h Second expansion density : 5kg/m3 Second expansion capacity : 250-500kg/h Power : 5.5kw Voltage : 380v 50Hz Contour size : L2990mm W2100mm H4000mm Weight : 1800kg Performance : multiple pre-expansion, stainless vessel, copper feeding device Safety feature : easy to operate.
This production line can produce and compound tile panel. The whole line consists of Passive feeding machine; profile forming machine; feeding shelf; edge folding machine; compound forming machine; cutting machine; supporter table. Assistant equipment: Color steel cleft machine; cap forming machine etc.
