Corona resistance polyimide films ,not only with ordinary polyimide film electrical properties, good heat resistance and resistance chemicals, but also with the super corona resistance and good thermal conductivity performance, mainly apply to sintering electromagnetic winding wire ,traction motor, wind generators, and the special motor turn-to-turn insulation and heat insulation, the heat resistance level is a class C. The technical requirements: 1. Type CR type: Corona resistance polyimide film without any coating FCR type: Corona resistance polyimide film with F46 single side coating FCRF type: Corona resistance polyimide film with F46 double side coating 2. Appearance its appearance is golden brown, translucent, the surface is bright and clean, no wrinkles, tear, particles, bubble, pinhole and foreign material defects. Its edge is tidy, and without damage. 3. Thickness and allowable deviation Model CR type FCR type FCRF type Thickness(um) 25 38 50 Allowable deviation(um) 2 3 3 Note: coating thickness may be based on customer demand in 5 ~ 12.5 um range regulation. 4. Width and allowable deviation Width may cut according to the customer request within 600 -1050 mm. Each volume length is for 500-1000 m; Each volume joints for final product are not more than three, the proportion of volumes with joints vs the total volumes number in the one order is not more than 25%,the shortest length is more than 300 m; Single plate or roll products joint numbers are not more than three, the shortest length is more than 300 m. FCR type and FCRF type using thermal bonding lap. 5. Film marks: -Every single volume label marked: batch number, specification, net weight;Every single plate or roll labeling: specification. -Package should have obvious and firm mark; -The format of the packing cases is confirmed by purchase order related terms. Serial Number Type CR FCR FCRF 1 Corona resistance life (h) 1 KV voltage, frequency 20 KHz temperature 90 2 pulse rise time 400 ns Y80 Y80 Y80 2 Industrial frequency electric intensity (v/um) Y200 Y120 Y100 3 Surface resistivity 1X1014 1X1014 1X1014 4 Volume resistivity 1 1X1010 1X1010 1X1010 5 Relative permittivity (48-62 Hz ac) 3.2 0.4 3.2 0.4 3.2 0.4 6 Dielectric power factor (48-62 Hz ac) 13.5X10-3 13.5X10-3 13.5X10-3 7 Tensile strength (Mpa) : Y135 Y80 Y80 8 Elongation at break (%) Y40 Y40 Y40. 1. Testing method: According to the ICE62068-1-2003/ GB /T13542.6-2006 "electrical insulation, part 6," Polyimide film for electrical insulation regulation experimental method. 2. Film packaging: Film roll with plastic film packaging, outer with shockproof foam cushion packaging, and support in place in the package overhead, make the film in the transportation conditions often get fully protected without damage, each volume end article sticker marking. 3. Dust is strictly prohibited in the packing box internal. 4. Film should be stored in a dry and clean indoor, film roll to be supported in the box, placed suspended and not be erected. It should not be close to the fire, central heating or exposed to direct sunlight. 5. Products should avoid damp and mechanical damage in the storage and transport. 6. Film storage period is for two years after COA issued date. Expired films are still available after again qualified according to the product standards inspection.
Standard number: 2006 GB/T13542.6-2006 Application range: The polyimide film is to be produced by cast method, which has High temperature resistance, resistance to radiation and excellent dielectric properties, applicable to electrical insulating of the class H electric motor and other electrical equipments , and other use electrical insulating materials. A. Technical requirements 1. Appearance: Film surface is bright and clean, not due, tear, particle, bubbles, Pinhole and foreign material defects ;Edge is tidy, without damage; Films supply in rolls. 2. Size 2.1. Thickness and allowable deviation: The standard thickness(um) 12.5 25 40 50 75 100 125 175 200 The allowable deviation(um) +1 +2 +2 +2 +3 +4 +4 +5 +5 -1 -1 -2 -2 -3 -3 -4 -5 -5 Note: Supplying according to customer request with thickness 12.5-22.5 um, allowable deviation can be negotiated by both sides. 2.2. Width: no less than 250 mm, deviation +/-1.6mm. According to the needs of the users, tape can be cut with different specifications. 2.3. Length: Supplying according to the requirement of customer. 2.4. Performance requirements Serial number Index name Unit Index 25um 40um 50um 75um 100um 1 density Kg/m3 1425 10 2 tensile strength horizontally Mpa Y165 vertically 3 elongations horizontally and vertically % Y40 Y50 4 shrinkage rate horizontally and vertically 150 400 % 0.35 2.5 5 industrial frequency electric strength 48H2 62H2 v/um Y240 Y200 Y180 Y160 6 surface resistance,200 Y1.0X1014 7 Volume resistance,200 M Y1.0X1010 8 Relative permittivity 48 62Hz - 3.5 0.4 9 dielectric power factor 48 62Hz - 4.0X103 10 long-term heat resistance temperature index - Y180. 1. Film should be wrapped in a tube on core and supply in rolls; Each volume in a plastic bag packing and seal, placing in dry and clean case 2. Each box packaging should specify model or type, product name, specification, batch number, gross weight, net weight, manufacturing date, manufacture ¡¥s name, and product test report. At the same time, marked "Moisture proof" "Prevent Impact" and other words in packing body. 3.Film should be stored in a dry and clean indoor, from the date of original shipment, shelf life for two years, more than storage life according to the standard check again, qualified can still use. 4. In storage and transport process, should avoid damp and mechanical damage.
High clarity for clean pallets & improved warehouse management Protection of your products with long-term load retention Ensuring super tight load stability for high-security storage & transit Resistance to high puncture with a multi-layer structure Customized sizes with UV-stabilization option Optimal film usage with stretch ability up to 350 % Use on automatic pallet wrapping machines with low noise for machine stretch film Full Benefit without investing in machinery for manual Stretch Film LLDPE stretch film packing pallet Material: LLDPE Type: Manual stretch, Machine stretch Used: For wrapping pallet, carton, box etc Feature: Safe and steady package. And avoid scratching goods. Eco-friendly, economical, meet ROHS stardand. Thickness: 10mic, 12mic, 15mic, 17mic, 20mic, 23mic, 25mic, 30mic, 35mic, 40mic, 55mic, 50mic. Package: industry packing.
LLDPE packing pallet stretch film High clarity for clean pallets & improved warehouse management Protection of your products with long-term load retention Ensuring super tight load stability for high-security storage & transit Resistance to high puncture with a multi-layer structure Customized sizes with UV-stabilization option Optimal film usage with stretch ability up to 350 % Use on automatic pallet wrapping machines with low noise for machine stretch film Full Benefit without investing in machinery for manual Stretch Film LLDPE stretch film packing pallet Material: LLDPE Type: Manual stretch, Machine stretch Used: For wrapping pallet, carton, box etc Feature: safe and steady package. And avoid scratching goods. Eco-friendly, economical, meet rohs stardand Thickness: 12mic, 15mic, 17mic, 20mic, 23mic, 25mic, 30mic, 35mic, 40mic, 45mic, 50mic Width:10cm, 20cm, 30cm, 40cm, 50cm, 100cm, 120cm, 150cm. Package: industry packing.
Heat stabilized PET film Film thickness: 50,75,100,125,150,188,200,250,350mic Film width:100-1600mm shrinkage OD MD/TD less than 0.2% at 150 with excellent smoothness & adhesion. Rolls palletized and with protective film.
PVC Thickness: 90 m Colour: Black /White/and others Adhesive : 20 m Liner Paper : 140m Width: 1520 mm Length: 50 m/R ( 0 splice ) Specifications: Average values Standard Thickness (/m): 90 Tensile strength (N/25mm): min. 15 Elongation at break (%): min. 90 Dimensional stability (mm): < 0.4 after 168h at 70C Liner: Embossed PE coated paper liner 145g/m grey imprint ¡°vealytech¡±. Stable under hygrometric variations. Adhesive properties: Peel on glass at 180 (N/25mm): 20 minutes after application 12 24 hours after application 15 Initial tack (N/25mm): 22. In rolls.
Product Features: 1. Used a wide range of paint industries(house.construction.shipbuilds.automotive and etc) 2. In door and out door protection 3. Prevent and flake(Fully treated Film) 4. Simple and convenient way in plastic sheet 5. Multi-Folded plastic film 6. Self static cling film Width: 300mm-2700mm Thickness: 8mic~10mic Material: HDPE. Weight: 500g.
Product Features: 1. Used only protection any contamination 2. Prevent any dusty, pollution 3. Multi-Folded in a way 4. Any color available Product Specifications: FPH1-1 900mm*100m FPH1-2 900mm*200m FPH2-1 1300mm*100m FPH2-2 1300mm*200m FPH3-1 1800mm*100m FPH3-2 1800mm*200m Thickness: 9mic~10mic Material: HDPE. Size: 900mm*100m (double layer) Weight: 1.7kg.
Product Features: 1. Fully electrostatic treatment enables a strong paint adhension 2. Overspray clings to surface (Automatic adsorption) 3. Indicated the paint absorbent surface 4. Multi-Folded in a way 5. Resist most solvents 6. Logo printable Product Specifications: Width: 3.8m~6.1m, custom-sized Thickness: 8mic~10mic Material: HDPE. 1roll/box, weight: 5.8kg.
Product Features: 1. Fully electrostatic treatment enables a strong paint adhension 2. Overspray clings to surface (Automatic adsorption) 3. Indicated the paint absorbent surface 4. Multi-Folded in a way 5. Resist most solvents 6. Logo printable. Product Specifications: AN1-112ft*400ft AN2-114ft*350ft AN3-116ft*350ft AN4-120ft*350ft Thickness: 8mic~10mic Material: HDPE. 1roll/box. weight: 4.6kg
-Easy to apply and remove. -Specially treated film clings to surfaces and is easy to clean up. -Re-commanding indoor house paint such as difficult surface like kitchen, furniture, bath and anywhere. Weight: 56g.
VCI film products provide corrosion protection. The products are in accordance with the American Military Standard MIL-PRF-22019D Through volatilization and contact, the VCI chemicals protect metal parts against the corrosive effects of moisture, salt and other contaminants while they are in process, storage or transit.
Specification: 1. PVA water soluble film for embroidery use 2. Thickness(um): 35 / 40 / 45 / 50 / 55 / 60 / 70 / 75 / 80 3. Color: natural 4. We can also process if you have special need PVA water soluble film for cold water embroidering can be used as temporary carrier. The carrier will be dissolved in cold water in a dozen seconds for its water-solubility, and the embroidering image will be shown.
Material: PE,etc(Excellent raw material) Supply period: All the year around If you are interested in this product, please as follows: 1. Customized structure, size and printing designs are welcome. 2. Please advise the material, thickness, size, printing color, style and quantity you prefer and other requirements, we will give you the best price. 3. The picture relevant to the products have been provided for reference only. We don’t have any intellectual property rights over the trademarks on display, and are not selling any product containing these trademarks. 4. Our payment terms including T /T, L/C. 5. The Samples are available free of charge, but the samples shipment/postage must be borne by sample collected. We can make according to your requirement.
Material: PE\PP (Excellent raw material) Supply period: All the year around If you are interested in this product, please as follows: 1. Customized structure, size and printing designs are welcome. 2. Please advise the material, thickness, size, printing color, style and quantity you prefer and other requirements, we will give you the best price. 3. The picture relevant to the products have been provided for reference only. We don’t have any intellectual property rights over the trademarks on display, and are not selling any product containing these trademarks. 4. Our payment terms including T /T, L/C. We can make according to your requirement.
Biodegradable plastic Material: PE,etc (Excellent raw material) Supply period: All the year around If you are interested in this product, please as follows: 1. Customized structure, size and printing designs are welcome. 2. Please advise the material, thickness, size, printing color, style and quantity you prefer and other requirements, we will give you the best price. 3. The picture relevant to the products have been provided for reference only. We don’t have any intellectual property rights over the trademarks on display, and are not selling any product containing these trademarks. 4. Our payment terms including T /T, L/C. 5. The Samples are available free of charge, but the samples shipment/postage must be borne by sample collected. We can make according to your requirement.
Product type:Flexible packing film Guage available:15um,18um,20um,22um,25um,30um,40um Width available:500mm-1200mm Length Available:6000m-12000m Surface treatment:One side or both sides treatment. Cartons or Wood pallets.
Product type:Flexible packing film Gauge available:20um-150um Width available:500mm-1200mm Length Available:6000m-12000m Main traits:High intensity,High tensile strength,excellent heat resistance and static resistance,High transparence,it can be used in food packing ,water packing...etc. Carons, Wood pallets.
BOPA film Product type:Flexible packing film Gauge available:10um,12um,15um25um Width available:500mm-1200mm Length Available:6000m-12000m. Wood pallets or cartons.
Product type:flexible packing film Gauge available:12um, 18um, 28um, 36um Width available:500mm-1200mm Length available:600m-12000m. Cartons, wood pallets.
