The product is produced in mLLDPE, LDPE resin-based raw material by five-layer co-extrusion advanced equipment which is imported from Italy, it¡¡¥s added anti-aging additives and with small width deviation, the width can achieve 22m. According to the user's needs, we can produce the natural cover film or black-and-white cover film for greenhouses in night and rain and snow covering, black is conducive to absorb the sun's heat, accelerate the melting of frost and snow, the white can prevent the infrared disseminate to the outside. The five-layer co-extrusion black and white cover film with the specification which materials fully plasticizing, more evenly mixed, good aging resistance and long service lifetime. Meanwhile, compared with the three-layer co-extrusion film, Less internal defects, higher tensile strength, good puncture and impact resistance at the same thickness. In summary, the black and white cover film is the ideal greenhouse covering material.
1. Dustproof and high transmittance. The unique outer surface of the coating can effectively prevent the adsorption of dust, and not to be the films deposition. Greatly improve the light transmittance, can keep high light transmittance. 2. Anti-aging and tensile. It used the most advanced five-lawyer co-extrusion equipment to blow out and then putting a layer of nylon materials, making it have long high strength and anti-aging time, which up to three years. 3. Long time anti-fogging and anti-dripping. The unique process makes the internal coating is not membranous, but granular; and the anti-fogging period are more than three years. Applicable scope: in the high-end field of greenhouse vegetable planting, modern agriculture seedling raising base, seedlings factory, flowers base and so on. It has been used in the modern and large-scale greenhouse.
Three-lawyer eva film is one of the vegetable greenhouse films. It is used widely and has been approved by the vegetable growers. 1. Long lifetime. High-end eva is more than 18 months because of adding high-strength materials. Middle-standard eva lifetime is 12 months. 2. Anti-aging, anti-dripping, anti-fogging. That can last for at least six months because of using the anti-dripping and anti-fogging materials. Middle and low grade eva is for 3-6 months. This can effectively reduce the humidity and pests and ensure the quality of the vegetables. 3. High light transmittance. Owing to using the high transmittance eva factor, the film surface is not easy to absorb dust. Light transmittance is more than 90%. 4. Insulation: add insulation agent, so night temperatures can be up to 2-3 degrees higher than the others. It can help crops early mature and improve benefit. 5. Scope of application: mid-range greenhouse vegetables, field of fruit trees. It is the preferred product for the common farmers. 6. Thickness: 0.06-0 .15 mm
Container lined bags in bulk containerized traffic, large tonnage shipment of solid bulk granular / powder material. Produced bulk container liner bags are usually placed in the container of 20 "or 40", as a than conventional bags and tons of bagging more economical and convenient way, has been widely used in the growing particles / the powder transport market. Sealed packaging, so as to effectively avoid the pollution from the seller to the buyer; Save shipping space and effectively increase traffic; Easy to operate, a significant reduction in labor and workload; Using a wide range applies for granular and powdered products; Suitable for rail, sea and other modes of transport.
Photoluminescent film, luminescent film. M2, roll
Bopet film Usage: very excellent base film material for aluminized film, metalic yarn, glitter powder and so on Application: packaging:it is used for food and meidicine packing such as medicine, milk powder, cosmetics, high-quality cigarette, candies etc Decoration: its metallic appearance can be used for decorative film Specification: Thickness: 12um, 23um, or customized Width: less than 1000mm, 1700~2200mm, or customized Length: normally 24200m, 48400m, or customized, eg, 8000m, 12000m Winded on paper core, wrapped by paper or bubble film, with/with pallet, packing also can be customized.
Opetical density: 2.2 od or 1.8 od Max width: 2100 mm Mini width: 57 mm using for flexible duct 1. 3000 meters/roll 2. 6000 meters/roll 3. 12000 meters/roll 4. 24, 000 meters/roll
Od: 2.2 od or 1.8 od Max width: 2100 mm Mini width: 57mm 3000 meters/roll 6000 meters/roll 12000 meters/roll 24000 meters/roll
1. Double-side or sigle-side copolymer coating.Colors is green. 2. Length: 1030-5000m 3. Width: 12-800mm 4. Steel base thickness: 0.15/0.155mm 5. Film thickness: 0.050mm 6.Total thickness: 0.21/0.25mm 7.Tensile strength >300mpa 8.Elongation>15% 9.Peeling strength>6.13n/cm 10.Heat seal of tape>17.5n/cm 11.Usage:for cable armouring Sea worthy packing
Mica tape 1)composition: mica tape backed with fiberglass fabric. 2)application: insulation layer for electric wire and cable. 3)standard thickness: from 0.08mm-0.17mm Pad, spool
Use for different kind of water resistant products. Such as ski jacket , work clothing , protective wear and medical wear . Breathable , water proof. Thickness : 0.05 - 0.10 mm Width : 20-22mm
Specification : Thickness from 12 micron to 40 micron, Width from 350mm to 1800mm Length from 3000m to 8000m. Packaging : Packed on pallet, wrapped with stretched film
Product name: high intensity prismatic conspicuity tape Color: white/red Item no.: cq-001 Feature: excellent retro-reflection and durability, good extensibility and stickiness. Application: trucks, trailers, school bus and other large vehicles etc. Surface film: pet Adhesive: permanent psa Liner: pe film Durability: 3 years Standard size: 5cm x 45.7m per roll. Export carton , 12rolls/carton
Applicable to civil and commercial building decoration, paint, spraypaint, electronic industry, automobile industry.Usually used to fix, seal, stick objects and protect the surface from being sprayed.
Based on polyethylene and fiber composite materials, model face coated with release agent, fiber surface coated with hot-fusible pressure sensitive adhesive.Application:widely used to seal carton, join carpets together, strap heavy objects, protect the surface, seal and suture pipeline, join ships together, pack objects from water.
Balanced peel adhesion, tack, tensile strength, and protecting the surface from rust humidity, water as well as easy-tear.Classification: classified to 70mesh according to density of the gauze. Its glue can be classified as white glue, transparent glue, red glue. The general colors are black, silver gray, russet, red, yellow, green, blue, white.
Construction:polyethylena, fabric, reinforcement, synthetical rubber pressure sensitive adhesive. Classification: classified to 35mesh, 27mesh according to density of the gauze. Its glue can be classified as white glue, transparent glue, red glue. The general colors are black, silver gray, russet, red, yellow, green, blue, white.
I description: Polyethylene anticorrosive tape is cold applied tape coating system for corrosion protection of oil, gas, petrochemical, and waste water underground or overhead pipelines. The inner-layer tape shall be applied after the primer and before the outer-layer tape by hand or with a wrapping machine structure The specification of the tape consists of two layers, adhesive layer and film backing Adhesive: butyl rubber Outer layer: special blend of stabilized polyethylene Iii Features Excellent adhesion to pipe and self Resistant to uv Can be applied over a wide temperature range Good conformability and consistent uniform thickness Easily applied with no special equipment Compatible with common pipe coatings Excellent resistance to cathodic disbonding Meets astm d 1000 standard Cold applied Technical datas: Inner wrap tape: xunda-t 100 series TypeT-150T-165T-180 Total thickness0.51 mm0.65 mm0.80 mm Polyethylene film0.31 mm0.34 mm0.39 mm Synthetic adhesive0.20 mm0.31 mm0.41 mm Elongation at break„d 400% Tensile strength60 n/cm61.2 n/cm63 n/cm Yield strength35.5 n/cm42.3 n/cm45.5 n/cm Peel adhesion to primed pipe21.2 n/cm26.5 n/cm33.2 n/cm Dielectric strength35 kv/mm45.8 kv/mm48 kv/mm Cathodic disbandment0.24 in radius 6.4 mm Volume resistivity2.5 x 1012 ohm.M Water vapor transmission rate „t 0.1gm/m2/24h Water absorption rate < 0.06% Recommended application temperature -5 to +600 c Max serve temperature-40 to + 800 c ColorBlack Available roll size (width x length)2" to 9" x 50 to800 feet. Paper cartons packing with waterproof membrane.
Polyethylene anticorrosion tape is cold applied tape coating system for corrosion protection of oil, gas, petrochemical, and waste water underground or overhead pipelines. The outer-layer tape backing shall be compounded so that it will be resistance to outdoor weathering. The outer-layer tape shall be applied after the inner-layer tape by hand or with a wrapping machine. Ii structure The specification of the tape consists of two layers, adhesive layer and film backing Adhesive: butyl rubber Outer layer: special blend of stabilized polyethylene Iii features: Excellent adhesion to inner-layer tape and self Resistant to UV Can be applied over a wide temperature range Good conformability and consistent uniform thickness Easily applied with no special equipment Compatible with common pipe coatings Excellent resistance to cathodic disbonding Meets astm d 1000 standard Cold applied technical datas: Outer wrap tape: xunda-t200 series TypeT 250T 265T 280 Total thickness0.51 mm0.65 mm0.80 mm Film0.38 mm0.51 mm0.63 mm Adhesive0.13 mm0.14 mm0.17 mm Elongation at break„d 400% Tensile strength45.3 n/cm50.8 n/cm60.1 n/cm Yield strength35.9 n/cm43.4 n/cm45.8 n/cm Dielectric breakdown32.9 kv/mm43.5 kv/mm45.2 kv/mm Cathodic disbandment0.24 in radius 6.4 mm Volume resistivity2.5 x 1012 ohm.M Water vapor transmission rate „t 0.08 gm/m2/24h Water absorption rate < 0.07% Recommended application temperature -50 to +600 c ColorWhite Available roll size (width x length)2" to 9" x 50 to 800 feet. Paper carton packing with waterproof membrane.
Polyethylene joint tape is cold applied tape coating system for anti corrosion of field joints, fittings, and specifically pipeing. The adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing. The joint wrap tape shall be applied by hand or with a wrapping machine. II structure The specification of the tape consists of two layers, adhesive layer and film backing Adhesive: butyl rubber Outer layer: special blend of stabilized polyethylene III features: Heavy duty adhesive Resistant to UV Can be applied over a wide temperature range Good conformability and consistent uniform thickness Easily applied with no special equipment Conformable to irregular shapes. Meets astm d 1000 standard Cold applied Technical datas: ItemT-365T-380T-3100T-3130 Total thickness (mm)0.640.761.021.27 Backing thickness (mm)0.280.300.350.50 Adhesive thickness (mm)0.360.460.670.77 Tensile strength (n/ cm)456080100 Elongation (%)400 450450500 Adhesion to prime pipe (n/cm)25 Dielectric strength (kv/cm)404242.545 Volume resistivity.M)2.5x10122.5x10122.5x10122.5x1012 Water vapor transmission rate24h0.1 Water absorptivity (%)0.10.1 Uv resistance 600h80 %80 %80 %80 % Application temperature -5 to 60 0 c Max serve temperature-40 to 80. Paper carton packaging with waterproof membrane.
