Type vs and vsr pumps are vertical, centrifugal slurry pumps submerged in sump to work. They are designed for delivering abrasive, large particle and high density slurries. These pumps have no need of any shaft seal and sealing water. They can also be operated normally for insufficient suction duties. Wet parts of type vs pump are made of abrasion-resistant metal. All parts of type vsr pump immersed in liquid are lined with rubber outer liner. They are suited to transport non-edge angle abrasive slurry. The type with¡°l¡±is a sump pump of extension shaft series, which is suited for the working condition of deeper level. The guide bearing construction is added to the pump on the basis of the standard pump, so the pump is with both more steady operation and wider application range, but flushing water should be attached to the guide bearing.
3g series three screw pump It applies to deliver clean and non-corrosive medium which has lubricating property at temp blow 150 with the viscosity of 3-760cst. The pump working pressure range from 0.6mpa to 2.5mpa and flow rate range from 0.6m3/h to 123m3/h Feature Medium is delivered in axial direction continuously without agitation and pulsation Small vibration and low noise High pressure and high efficiency Simple structure, easy disassemble and assembly Small volume and light weight Slight wear and long life Materials: Driving and driven screw:16mncrs5, 40cr, 46, 38crmoal Pump body: ht200, qt450-10, zcusn10p1, zg270-500 Export standard case/plywood case
Lqb asphalt heat pump (gear oil pump) applicable to transport non-corrosive, not containing solid particles, at normal temperature have coagulability medium, especially suitable for cold area outdoor installation and process medium need insulation occasions, medium temperature can reach 250 c, the viscosity for 5-1500 cst. Asphalt pump use: Used to transport heavy oil, asphalt, glues, resin, detergent, etc Structure: This lqb asphalt heat pump pump body with hollow sandwich, and is equipped with import and export flange, can be used for heat conduction oil, steam, hot water and other media to transport liquid and pump heat insulation and cooling. Export standard carton or plywood case
Working condition Suction lift up to 5 m Liquid temperature up to +40oc Ambient temperature up to +40 oc Max. Working pressure: 5bar Float switch: can be with or without (on request) Application and installation They are recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive to the materials of which the pump is made. Mainly used for well pumping, river pumping, farm irrigation, water supply, drainage in breeding industry. Structure feature Pump body: cast iron or aluminum Motor bracket: cast iron or aluminum Impeller: aluminum or plastic Mechanical seal: ceramic - graphite or silicon carbide-carbide alloy 390*165*200
1. Technical data Suitable fluids: clear water. Power: 0.37 kw (0.5hp) Single phase: 220v---240v/50 hz(or 110v/60hz ) Degree of protection: ip44. Insulation class: b Pumping head: 40 meters. Flowrate: 40l/min (2.4m3/h) Qb series clean water pumps are high efficient household electric pumps, with the miniature heavy-duty electric motor and peripheral pump coupled directly. They are ideal for household well water pumping, water injection supplying, car washing, and garden watering and so on. 1pcs/box 6pcs/carton 275*150*170
Product name THM-3C slurry pump Type THM pump size 4/3 Capacity 86.4-198m3/h Head 9-52m Allowable Max. Power 30kw Speed 1000-2200r/min NPSH 4-6m Introduction Model Explanation and Performance Chart: THM-3C T: Tower pump H: High Concentration M: Metal lined 3: Discharge size (inch) C: Frame type with maximum power Introduction of Slurry Pump ---- THM Series THM Series slurry pump is mainly used for handing strong abrasive, high density slurries and low density, high head slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc. The features of this kind of slurry pump The frame plates of this kind of slurry pump have replaceable wear-resistant metal liners. The impellers are made of wear-resistant metal. The frame plate liner and impeller for THM pump are adoptable of hard metal only. Bearing assembly of this kind of slurry pump use cylindrical structure, adjusting the space between impeller and front liner easily, being removed completely when being repaired. Bearing assembly use grease lubrication. The shaft seal of this kind of slurry pump could use the packing seal, expeller seal and mechanical seal. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications. Here are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. Wide performance, good NPSH and high efficiency are main character of these kinds of slurry pump. The pump of this type may be installed in multistage series to meet the delivery for long distance. Main application of this kind of slurry pump This kind of slurry pump mainly applies in coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station etc. Pump Model THM Series Impeller Dia. Allowable Max.Power Clear Water Performance Capacity Q Head H(m) Speed n(r/min) Max.Eff. ¦Ç% NPSH (m) m3/h l/s THM-1B 15 12.6-28.8 3.5-8 6-68 1200-3800 40 2-4 152 THM-1.5B 15 32.4-72 9-20 6-58 1200-3200 45 3.5-8 184 THM-2C 30 39.6-86.4 11-24 12-64 1300-2700 55 4-6 214 THM-3C 30 86.4-198 24-55 9-52 1000-2200 71 4-6 245 THM-3D 60 THM-4D 60 162-360 45-100 12-56 800-1550 65 5-8 365 THM-4E 120 THM-6E 120 360-828 100-230 10-61 500-1140 72 2-9 510 THM-6R 300 THM-8ST 560 612-1368 170-380 11-61 400-850 71 4-10 686 THM-10ST 560 936-1980 260-550 7-68 300-800 82 6 762 THM-12ST 560 1260-2772 350-770 13-63 300-600 77 3-10 965 THM-14ST 1200 1368-3060 380-850 11-63 250-550 79 4-10 1067 exported wooden crate
Product nameTgm-3e slurry pump TypeTgm Pump size4/3 Capacity126-252m3/h Head12-97m Allowable max. Power120kw Speed600-1400r/min Npsh2-5m Introduction£º Model explanation Tgm-4f T: our company logo G: high head M: metal lined 4: discharge size (inch) F: frame type with maximum power Introduction of centrifugal slurry pump ¡ª¡ª tgm series Tgm series slurry pumps are cantilevered, horizontal slurry pumps, centrifugal slurry pumps. They are designed for the handling of highly abrasive, high-density slurries. This series pump may also be installed in multistage series The features of this kind of centrifugal slurry pump The frame plate liner and impeller for tgm series centrifugal slurry pump are made of wear-resistant metal. The shaft seals for the tgm series may choose gland seal or expeller seal. The discharge branch can be oriented to any of the eight positions to suit installations and applications. Application: They are designed for the handling of highly abrasive, high density slurries in the metallurgical, mining, coal, power generation, construction material and other industry. The pumps of this type may also be installed in multistage series. Tgm series slurry pump performance chart Pump modelAllowable max. Power(kw)Clear water performance¡¡ Capacity qHead h(m)Speed n(r/min)Max.Eff. ¦ç%Npsh (m)Impeller dia(mm) M3/hL/s Tgm-1c3016.2-34.24.5-9.525-921400-2200202-5.5330 Tgm-2d6068.4-13719-3825-87850-1400473-7.5457 Tgm-3e120126-25235-7012-97600-1400502-5508 Tgm-4f260324-72090-20030-118600-1000643-8711 Tgm-6s560468-1008130-28020-94500-1000654-12711 Note: quantity range recommended:50%q¡¯¡üq¡ü100%q¡¯(q¡¯appropriate to capacity at highest efficiency point). 2.Npsh:appropriate to point q recommended at highest speed. Exported wooden crate
Technological parameters: Flow rate: 10~ 2000 l/h. Pressure: 0~1.0 mpa. Adjustment mode: manual, electric, pneumatic, frequency conversation. Measuring accuracy: 1%. Motor power: 400v / 0.37kw (or 0.55kw) / 50hz (for your reference only) Fluid temperature: -45~450 Allowed particle size: 0.01 mm Viscosity of fluid: 0.3~800 cst Head of pump: 1 Diaphragm: 1 Material: Worm wheel: tin bronze Worm: 40cr or 38crmoal Diaphragm: ptfe Pump head: pvc, cs, ss, ptfe, etc. Inlet & outlet part: pvc, cs, ss, ptfe, etc. Bearing: nsk japan, skf sweden Oil seal: nok japan Advantage: 1. Simple structure and beautiful appearance. 2. Vertical installation of motor avoid the leakage of lubrication oil and prevent the environmental pollution. 3. Patented integrated sleeve adjustable eccentric transmission mechanism. 4. High drive efficiency. 5. Strong carrying capacity with accurate flow rate. 6. The flow rate is adjustable with capability of 0-100% free adjustment. 7. Stable and reliable operation with low noise. 8. Convenient maintenance and long life service. Certificate: Dnv ISO9001:2000 ISO14001-2004 Ohsas18001 Ce Api Application: Our products are widely applied to petroleum, natural gas, chemical, power industry, environmental water treatment, nuclear industry, pharmaceutical, foodstuff, etc. We occupy an important market position in petroleum, natural gas, polycrystalline silicon, fluorine chemical, our market occupancy reaches more than 90% in chinese fluorine chemical industry. Strong wooden box with pallet
Technological Parameters: Flow Rate: 10~ 2000 L/H. Pressure: 0~1.0 Mpa. Adjustment Mode: Manual, Electric, Pneumatic, Frequency Conversation. Measuring Accuracy: 1%. Motor Power: 380V / 40W (or 60W) / 50Hz (for your reference only) Fluid Temperature: -45~450 Allowed Particle Size: 0.01 mm Viscosity of Fluid: 0.3~800 cst Head of Pump: 1 Diaphragm: 1 Material: Worm Wheel: Tin Bronze Worm: 40Cr or 38CrMoAl Diaphragm: PTFE Pump Head: SS, Inlet & Outlet Part: SS, Bearing: NSK Japan, SKF Sweden Oil Seal: NOK Japan Advantage: 1. Simple structure and beautiful appearance. 2. Vertical installation of motor avoid the leakage of lubrication oil and prevent the environmental pollution. 3. Patented Integrated Sleeve Adjustable Eccentric Transmission Mechanism. 4. High drive efficiency. 5. Strong carrying capacity with accurate flow rate. 6. The flow rate is adjustable with capability of 0-100% free adjustment. 7. Stable and reliable operation with low noise. 8. Convenient maintenance and long life service. Certificate: DNV ISO9001:2000 ISO14001-2004 OHSAS18001 CE API Application: Our products are widely applied to petroleum, natural gas, chemical, power industry, environmental water treatment, nuclear industry, pharmaceutical, foodstuff, Cement Grinding Aid Auxiliary etc. We occupy an important market position in petroleum, natural gas, polycrystalline silicon, fluorine chemical, our market occupancy reaches more than 90% in Chinese fluorine chemical industry. We also win a big market proportion of oversea countries.We sincerely hope much more cooperation opportunities between you and us. outerside wooden box with pallet inner foam with PE bag
Technological parameters: Flow rate: 10~ 2000 l/h. Pressure: 0~1.0 mpa. Adjustment mode: manual, electric, pneumatic, frequency conversation. Measuring accuracy: 1%. Motor power: 380v / 40w (or 60w) / 50hz (for your reference only) Fluid temperature: -45~450 Allowed particle size: 0.01 mm Viscosity of fluid: 0.3~800 cst Head of pump: 1 Diaphragm: 1 Strong wooden box with pallet
Technological parameters: Flow rate: 10~ 2000 l/h. Pressure: 0~1.0 mpa. Adjustment mode: manual, electric, pneumatic, frequency conversation. Measuring accuracy: 1%. Motor power: 380v / 0.75kw (or 1.5kw) / 50hz (for your reference only) Fluid temperature: -45~450 Allowed particle size: 0.01 mm Viscosity of fluid: 0.3~800 cst Head of pump: 1 Diaphragm: 1 Material: Worm wheel: tin bronze Worm: 40cr or 38crmoal Diaphragm: ptfe Pump head: pvc, cs, ss, ptfe, etc. Inlet & outlet part: pvc, cs, ss, ptfe, etc. Bearing: nsk japan, skf sweden Oil seal: nok japan Advantage: 1. Simple structure and beautiful appearance. 2. Vertical installation of motor avoid the leakage of lubrication oil and prevent the environmental pollution. 3. Patented integrated sleeve adjustable eccentric transmission mechanism. 4. High drive efficiency. 5. Strong carrying capacity with accurate flow rate. 6. The flow rate is adjustable with capability of 0-100% free adjustment. 7. Stable and reliable operation with low noise. 8. Convenient maintenance and long life service. Certificate: Dnv iso9001:2000 Iso14001-2004 Ohsas18001 Ce Api Application: Our products are widely applied to petroleum, natural gas, chemical, power industry, environmental water treatment, nuclear industry, pharmaceutical, foodstuff, etc. We occupy an important market position in petroleum, natural gas, polycrystalline silicon, fluorine chemical, our market occupancy reaches more than 90% in chinese fluorine chemical industry. Strong wooden box with pallet
Technological parameters: Flow rate: 0.5~ 12100 l/h. Pressure: 0.1~95 mpa. Adjustment mode: manual, electric, pneumatic, frequency conversation. Measuring accuracy: 1%. Motor power: 380v / 40w (or 60w) / 50hz (for your reference only) Fluid temperature: -45~450 Allowed particle size: 0.01 mm Viscosity of fluid: 0.3~5000 cst Head of pump: 1 Diaphragm: 1 Material: Worm wheel: tin bronze Worm: 40cr or 38crmoal Diaphragm: ptfe Pump head: pvc, cs, ss, ptfe, etc Inlet & outlet part: pvc, cs, ss, ptfe, etc Bearing: nsk japan, skf sweden Oil seal: nok japan Strong wooden box with pallet
Offer replacement /genuine for various hydraulic spare parts of pump/ motor/ excavator (etc.) for lots of brands such as rexroth, vickers, poclain, parker, caterpillar, yuken, komatsu, etc. We suggest the parts as like charge pump, cartridge kit, rotary group, piston shoe, cylinder block, valve plate, retainer plate, ball guide, drive shaft, swash plate, press pin, snap ring, back cover, saddle bearing, bearing seat, shaft seal, etc, ... Service : offer replacement, genuine. The replacement means for the required product made in china fully interchangeable with genuine, as its technique and function is same as the data of the genuine itself. The genuine is made in the original brand country, such as the brand bosch rexroth is in germany. Pls feel free to give us your specific style number. We will bring you the best product and service at most competitive rate. Sincerely hope to build up the close business relation with you on basis of the mutual benefit in a long term. Thank you. Box
Offer replacement /genuine for various hydraulic spare parts of pump/ motor/ excavator (etc.) for lots of brands such as rexroth, vickers, poclain, parker, caterpillar, yuken, komatsu, etc. We suggest the parts as like charge pump, cartridge kit, rotary group, piston shoe, cylinder block, valve plate, retainer plate, ball guide, drive shaft, swash plate, press pin, snap ring, back cover, saddle bearing, bearing seat, shaft seal, etc, ... Service : offer replacement, genuine. The replacement means for the required product made in china fully interchangeable with genuine, as its technique and function is same as the data of the genuine itself. The genuine is made in the original brand country, such as the brand bosch rexroth is in germany. Pls feel free to give us your specific style number. We will bring you the best product and service at most competitive rate. Sincerely hope to build up the close business relation with you on basis of the mutual benefit in a long term. Thank you. Packed with wooden box
High pressure pump.
Designed to be interchangeable with a warman ah 4/3 slurry pump. Fh series slurry pumps are mainly using for handing strong abrasive, high density slurries and low density, high head slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc. Structure: The frame plates of this kind of slurry pump have replaceable wear-resistant metal liners. The impellers are made of wear-resistant metal. Bearing assembly of this kind of slurry pump use cylindrical structure, adjusting the space between impeller and front liner easily, being removed completely when being repaired. Bearing assembly use grease lubrication. The shaft seal of this kind of slurry pump could use the packing seal, expeller seal and mechanical seal. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications. Here are the drive types, such as v belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. The pump of this type may be installed in multistage series to meet the delivery for long distance. Application: This kind of slurry pump mainly applies in coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station etc. We supply complete, ready-to-use packages including pump, motor and frame desinged to your specifications. These pumps are ideal for the chemical transfer pump in plants for chemicals including lime. Standard export wooden cargo
Designed to be interchangeable with a Warman AH 6/4 Slurry Pump. FH Series slurry pumps are mainly using for handing strong abrasive, high density slurries and low density, high head slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc. Structure: The frame plates of this kind of slurry pump have replaceable wear-resistant metal liners. The impellers are made of wear-resistant metal. Bearing assembly of this kind of slurry pump use cylindrical structure, adjusting the space between impeller and front liner easily, being removed completely when being repaired. Bearing assembly use grease lubrication. The shaft seal of this kind of slurry pump could use the packing seal, expeller seal and mechanical seal. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications. Here are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. The pump of this type may be installed in multistage series to meet the delivery for long distance. Application: This kind of slurry pump mainly applies in coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station etc. We supply complete, ready-to-use packages including pump, motor and frame desinged to your specifications. These pumps are ideal for the chemical transfer pump in plants for chemicals including lime. Standard export wooden cargo.
Specification : •Size range (discharge) 1” to 18” 25 mm to 450 mm •Capacities to 22,000 gpm to 5,000 m3/hr •Heads to 240 ft to 73 m •Pressures to 300 psi to 2,020 kPa. Size: 1"-16" Weight: 77-18864 Dimension:1cube-12cube.
Size range (discharge) 1¡± to 18¡± 25 mm to 450 mm Capacities: to 22,000 gpm to 5,000 m3/hr Heads: to 240 ft to 73 m Pressures: to 300 PSI to 2,020 kPa. Size: inlet : 1.5¡±-18¡± outlet:1¡±-16¡± Weight: 77kg-18864kg Dimension : 0.2cube-16cube.
Specification : •Size range (discharge) 1” to 18” 25 mm to 450 mm •Capacities to 22,000 gpm to 5,000 m3/hr •Heads to 240 ft to 73 m •Pressures to 300 psi to 2,020 kPa. Size: inlet : 1.5”-18” outlet:1”-16” Weight:77kg-18864kg Dimension: 0.2cube-16cube.
