BHMTPMPA is a high-efficient chelating scale inhibitor, it has good effect to carbonate and sulfate scale.
BHMTPMPA has good water-soluble properties and heat tolerance.
BHMTPMPA has high calcium ion tolerance in a wide pH ranges and temperature as high as 120C.
BHMTPMPA can be used as scale and corrosion inhibitor for oilfield water, industrial circulating cool water and boiler.
Solubility:
It is soluble in ester, ketone, aromatics and alcohol ethers. It is insoluble in 200# gasoline and alcohol.
Characters:
1, Good adhesion and High hardness;
2, Good compatibility with CAB or NC;
3, Non yellowing and good resistance to weather;
4, Good compatibility with other resins;
5, Good adhesion with plastic substrate;
HPMA is a low molecular weight polymeride, with average molecular weight 400-800. No toxicity, soluble in water, high chemical and thermal stability, decomposed temperature above 330�ºC. HPMA has obvious threshold effect under high temperature (350�ºC) and high pH(8.3)level, suitable to be used in alkaline water system or built with agents. It has good scale inhibition against carbonate and phosphate scales under temperature 300�ºC with effective time as long as 100 hours. Due to its good scale inhibition and high temperature tolerance properties, HPMA is widely used in desalination plant of flash vaporization equipment, low pressure boiler, steam locomotive, crude oil evaporation, petroleum pipeline, and industrial circulating cool water systems. In addition, HPMA has good corrosion inhibition effect when used together with zinc salt. HPMA can also used as additives for cement.
Traditional antiscalant: It cannot be decomposed into non-toxic substances under the action of microorganisms and fungi, and long-term accumulation will cause potential hazards. Alternatives: Phosphate-free, biodegradable green corrosion and scale inhibitor polyaspartic acid.
Polyaspartic acid: the best scale inhibition performance, and has very good biocompatibility and biodegradability, and has a certain corrosion inhibition effect.
DBNPA is widely used in industrial circulating water systems, large air-condition, and large centers of sewage treatment to eliminate microorganisms and algae and shuck off clay. DBNPA is also used in the process of paper making to prevent reducing the quality of paper by the generation of microorganisms. DBNPA is suitable for metal cutting of cooling liquor, recovery system of oil, latex, and ply-woods as anti-spy biocides. DBNPA has the following advantages: easy to handle; no unusual oxidation hazards; similar performance and safety in paper and oilfield applications; used for slime control in the wet-end of the paper mill and performs exceptionally well against slime-forming bacteria. DBNPA has exhibited outstanding efficiency against bio-films and a broad spectrum of bacteria, fungi, and yeasts.
Additionally, DBNPA series products are used in the short-term preservation of coatings and coating additives such as latex, starch, and mineral slurries. DBNPA is a fast-acting/quick-kill biocide that is broad-spectrum and does not contain or release formaldehyde.
181908 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
Zinc Chloride has the property of dissolving metal oxides and cellulose.Molten Zinc Chloride has good electrical conductivity.Zinc Chloride can be used as a dehydrating agent and catalyst in the organic synthesis industry,as well as mordant,sizing agent and weighting agent in the dyeing and weaving indutry.Zinc Chloride can also be used as petroleum purifier and actiated carbon activator.The affinity of other material,it can be used as a fireproof substance for clothing and can also be used as a fabric odor cleaner.Zinc Chloride can attack metal oxides to generate MZnOCl2 which is principle of it as a metal flux.
Water treatment field
Zinc Chloride can help slow the rate at which water corrodes other metals
The compliant lotion, building materials, electric power metallurgy, oil field chemical engineering, leather, paint coating and spinning prints to dye, the day turn, the antisepsis of cosmetics, deckle, the water transaction etc. realm.
Performance characteristics
1. As a broad-spectrum, long-lasting bactericide to kill many bacteria, fungi and yeasts, the using amount is small.
2. Suitable for use in the medium of the pH value in the range of 2 to 9; free of divalent salt, cross-link no emulsion.
3. Miscible with water; can be added in any production step; easy to use.
4. It has a low toxicity and an appropriate concentration of using, which will lead to no harm completely.
Usage and Cautions
1. In water treatment applications, dilute it into a 1.5% aqueous solution first. Add the solution at a quantity of 80 to 100 ppm for one or two times each week depending on the multiplication of microorganisms like bacteria and algae.
2. Avoid direct eyes' contact with it for a long period. Once the contact happens, rinse eyes with water without delay. No long-term contact with the skin is allowed.
3. Any contact with reducible metals is forbidden during storage, for example, iron and aluminum, so as to avoid decomposition.
4. Not suitable for use in the alkaline medium of pH> 9.0 due to its poor stability. Any combination of this chemical with highly nucleophilic chemicals, like S2- and R-NH2, will lead to declined quality or even complete failure of the product.
CMIT/MIT is a liquid biocide with outstanding advantages such as rapid inhabitation of growth and macromolecule synthesis, broad spectrum activity, effective at low concentration and against biofilm as well as a wide pH range, biodegradable non-persistent in the environment, non-surface activity, infrequent dosing, easily deactivated, compatibility, low toxicity, water soluble, non-foaming, cost effectiveness etc. The active ingredient is a mixture of two isothiazolines. CMIT/MIT is ideally suited to meet the requirement of an industrial water treatment biocide for bacteria, fungi and algae paper mill slimicide.
It is the main industrial sterilization, antiseptic and anti-enzyme agent. It has outstanding inhibition of the growth of molds (fungi, bacteria), algae and other microorganisms in the organic medium, and solves a series of problems such as mold, fermentation, deterioration, demulsification, odor, etc. of organic products caused by the growth of microorganisms. Therefore, developed countries widely use BIT in latex products, water-soluble resins, coatings (latex paint), acrylics, and polymers. Polyamine products, photographic lotion, paper-making, ink, leather, lubricants and other products.
1.Used as an intermediate in organic synthesis. It is liquid, soluble in organic solvent, slightly soluble in water. It is a low toxicity, high efficiency and broad spectrum anti-mildew agent. It has strong killing effect on mold and can achieve ideal anti-mildew effect.
2.It can be widely used in coating, paint, lubricating oil, shoe polish, leather chemistry, wood products and cultural relics protection and many other products.
Item Specification
Color saybolt +28
Initial boiling point C 143
Dry point C 153
Specific gravity 20Ckg/m3 700-728
N-onane content % 99
Total sulfur ppm 1
Water content ppm 50
As an antiparasitic, it is capable of treating roundworms, hookworms, and other kinds of helminth species that can attack wild animals, livestock and humans. It also has effects of inhibiting the angiogenesis of cells. The mechanism of action is still not fully understood. It has found that Thiabendazole is capable of suppressing the helminth-specific mitochondrial enzyme fumarate reductase, further inhibiting the citric acid cycle, mitochondrial respiration and ATP production, leading to helminth's death. It may also inhibit the microtubule polymerization processes.
Bactericide;
Industrial sterilization and mildew prevention;
Efficient and broad spectrum bactericide and algicide;
It is used to manufacture rubber products such as cables, wires and tires.
Name: Triethanolamine
CAS: 102-71-6
Chemical formula: C6H15NO3
Appearance: colorless liquid
Triethanolamine is a colorless oily liquid with mild odor, easy to absorb water, exposed to air and turning brown under light. At low temperatures, it becomes a colorless or light yellow cubic crystal system.
Application:
1. As a compliant lubricant, it can eliminate friction between metals and help improve the viscosity and solubility of lubricating oil.
2. As a surfactant, it is often used in household cleaning and personal care products such as detergents, cleaners, softeners, etc.
3. As a preservative, stabilizer, and co solvent, it can be used in cosmetics, and food processing.
4. As an oil in water emulsifier, it can be used to prepare various skin lotion and cosmetics.
It is widely used as a multi-functional petroleum additive, with resistance to abrasion, corrosion, oxidation and rust. it also has a protective effect on stainless steel, Iron, and nickel alloy.
White powder, apparent density:0.35-0.90g/ml, melting point: 622�°C, easily dissolving in water; water solution is alkaline (PH value of 1% solution is 9.7); can hydrolyze into phosphate in water, has good ability in complexing metal ions; can be used to soften water; has some surfactant properties.
1.In detergents
The majority of STPP is consumed as a component of commercial detergents. It serves as a "builder," industrial jargon for a water softener. In hard water (water that contains high concentrations of Mg2+ and Ca2+), detergents are deactivated. Being a highly charged chelating agent, TPP5- binds to dictations tightly and prevents them from interfering with the sulfonate detergent.
2.Food Applications
STPP is a preservative for seafood, meats, poultry, and animal feeds. It is common in food production as E number E451. In foods, STPP is used as an emulsifier and to retain moisture. Many governments regulate the quantities allowed in foods, as it can substantially increase the sale weight of seafood in particular. The United States Food and Drug Administration lists STPP as "generally recognized as safe.".
3.Other Uses
Other uses (hundreds of thousands of tons/years) include "ceramics, leather tanning (as masking agent and synthetic tanning agent - SYNTAN), anticaking, setting retarders, flame retardants, paper, anticorrosion pigments, textiles, rubber manufacture, fermentation, antifreeze.
Used for the extraction of spices and essences and as a solvent. Ethyl butyrate can be used in daily chemical fragrance formulations, but the amount is very small. It is widely used in edible flavor formulations, such as bananas, pineapples, etc., and can be formulated with a variety of fruit flavors and other flavors.
Product Name Phenylethyl Resorcinol
Other Name Symwhite 377 Powder
Einecs No. 480-070-0
purity
99%min
CAS NO 85-27-8
MW 214.26
MF C14h14o2
Color White
Test HPLC
Storage Temperature Cool Dry Place
Phenylethyl Resorcinol is served as a newly lightening and brightening ingredient in skin care products with better stability and security, which is widely used in whitening, freckle removing and anti-aging cosmetics.
1. It has an outstanding whitening effect to skin. It is reported that it is one of the highest active tyrosine kinase inhibitors, which is 22 times higher than Kojic acid.
2. It is an antioxidant that is considered effective in influencing the formation of pigmentation, B16V, which is 210 times better than Kojic acid and 32 times than Arbutin. It could balance skin color and relieve the chromatosis caused by ultraviolet.
3. It served as an anti-oxidant agent with better performance, which is better than VE/VC/BHT
4. It is easily dissolved with dissolvability of 1% in glycol and easy to be added. Meanwhile it has better stability and security.
5. Dosage: 0.1-1.0%
Glabridin is a chemical compound that is found in the root extract of licorice (Glycyrrhiza glabra).
Glabridin is an isoflavone, a type of isoflavonoid. This product is part of a larger family of plant-derived molecules, the natural phenols. It is used as an ingredient in cosmetics and is listed in International Nomenclature of Cosmetic Ingredients (INCI).
Glabridin is yellowish-brown powder. It is insoluble in water, but soluble in organic solvents.
Application&Function
1.Glabridin has depigmentation and properties. It inhibits the production of melanin, the pigment responsible for the colouring of the skin.
2.Studies have shown positive effects in fields like LDL (low-density lipoprotein) protection against oxidation.
3.Glabridin inhibits the inflammatory reaction by blocking cyclooxygenase and preventing the formation of free radicals such as superoxide anions.
4.At the same time Glabridin prevent rough skin and also has anti-inflammatory, antibacterial effect.
Benefits of Tranexamic Acid The whitening mechanism of tranexamic acid is to rapidly inhibit the activity of tyrosine chymase and melanocytes at the same time and reduce the accumulation of melanin. For melanin precipitation, tranexamic acid also has a good effect.
Used Widely used in skin creams, eye creams, serums and other skin care products. Moisturizing Lotion, Facial Cleanser, Skin Cream, Massage Cream, Mask. Tranexamic Acid is a synthetic amino acid that functions as a skin-conditioning agent and astringent. In cosmetics, it functions on skin as a barrier repair ingredient and seems able to help skin recover from damage. It an effective skin lightener when used in cosmetic formulations.
Application
Cosmetics: Whitening effect Clinical studies for years have proved that tranexamic acid can dilute spot effectively and rapidly, which helps to demonstrate a perfect white and bright skin. The spot-removing effect of tranexamic acid is about 50 times over Vitamin C, and 10 times over AHA. The concentration limit of usage is 2%-3%, and in cosmetics the amount is around 0.5%.
181908 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
