0.5X 2.0X 0.3X 0.7X 1.0X Barlow Auxiliary Glass Lens For 180X 300X C-MOUNT Lens. 0.5X 0.3X 2.0X 0.7X Magnification Power Barlow Lens for Industrial Microscope Camera C-MOUNT Lens.
Barlow Auxiliary Objective Glass Lens For 180X 300X C-MOUNT Lens Industry Video Microscope Camera.
Features:
1. 0.5X 0.3X 2.0X 0.7X Magnification Power lens for Industrial Microscope Camera C-MOUNT Lens.
2. 1-3/4" (42mm) Mounting Thread
3. Doubling Total Magnification power of your Microscope and reduce the focus length.
4. Objective Magnification Power by 0.7 - 4.5X(about 10 - 180X on the display, using 0.35X 0.5X 2.0X Barlow Lens about 2.45 - 360X on the display).
Options:
1 x 0.3X Barlow Lens(Increase working distance).
1 x 0.5X Barlow Lens(Increase working distance).
1 x 0.7X Barlow Lens(Increase working distance).
1 x 2.0X Barlow Lens(Reduced working distance).
1 x 1.0X Barlow Lens(Protection function).
120X 130X 180X 200X 300X adjustable amplification C-Mount Lens adapter for Industry Video Microscope HDMI VGA USB Camera. Continuous Zoom C-MOUNT Lens for High working distance and large observation area, used for Industry Video Microscope Camera.
Zoom C-mount Glass Lens Adapter for Industry Microscope Camera
This adapter fits XDS-0745 120X 180X 300X Zoom C-mount Lens
120X(Use magnification factor of 120X,Increase working view)
180X(Use magnification factor of 180X,Increase working view)
300X(Use magnification factor of 300X,Reduce working view,Increase magnification factor)
130X Continuous Zoom C-mount Lens,Work distance 30mm-570mm.High working distance and large observation area,for phone PCB SMD Soldering
200X FHD 0.7X-5X Zoom C-mount Lens,XDS-0745 180X upgraded version, better definition,Increased working distance to 100mm-175mm, very suitable for phone PCB SMD Soldering
120x 180x 300x Feature:
Working distance: 95mm
zoom c-mount Lens
0.5X/1X/0.35X C-mount adapter
zoom ratios: 6.5:1
Objective Magnification Power by 0.7 - 4.5X(about 10 - 120X 180X or 300X on the display)
Size: 168mm(L) 50mm(DIA)
130x Feature:
Zoom ratio: 15: 1
Magnification Power by :1X~120X
Material vision: 2.4mm-36mm
Working distance: 55mm-570mm
Lens length: 110mm
Interface size: 28mm
200x Feature:
Working distance:100mm -175mm
Connector:C mount
Zoom:continouasly variable zoom
Objective Magnification:0.7X - 5X(about 10 - 200X on the display)
Eyepiece lens adapter:0.4X
Fixed position:50mm
Locking:0.7X - 5X Locking
Auxiliary Objective Lens:0.35X, 0.5X, 2X (optional)
Size:132mm(L) 55mm(DIA).
Oil Resistant, Wear-resistant, Seawater Corrosion Resistant and UV Aging Resistant. Suitable for Controlling the Diffusion and Transfer of Oil Spill in Ocean or Other Waters.
Model No.:
ZB0620-16
Color: White
Product Name: Plastic Thru Hull Outlets
Size:5/8
Marine Hardware parts & accessories Boat Plastic Thru Hull Fitting Bilge Pump Drain or Vent Hose Fitting Connector for hose
Description:
Our Thru-Hulls are meant for installation through the transom and are ideal for overflow use in live well installations or as an exhaust port for a bilge pump. These thru-hulls are available in a variety of sizes ranging from 5/8 up to 2. Their construction is designed to resist degradation as a result of chemical and saltwater exposure.
Sturdy construction for long lifespan
Easy to install and remove
Simple to use shandong
Payment Type: L/C,T/T
Incoterm: FOB,EXW,CFR,CIF
Transportation: Ocean,Land,Air,Express
182877 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
ZB200 Bailey Bridge is a standard steel bridge , adopted extensively and the most popular in the world, possessing the features of simple structure, convenient transport, speedy erection and easy disassembling, while having the advantage of heavy loading capacity, great stability and long fatigue life being capable of an alternative span, loading capacity and mixture form to erect all kinds of Temporary Bridges, Emergency Bridges and Fixed Bridges. The bridge has the advantages of few components, light weight and low cost. Bailey bridge is similarly like compact 100,compact 200 International bridge. it is assembled by each panel, and invented by Donald Bailey. The 321 panel bridge can be easily dissembled and rapidly erected. The whole bridge is made by high-tensile strength steel. Main beam is light weight panels and the panels are connected by panel connection pins. It is easy to assemble or disassemble and transport. It can also be assembled into different forms of panel bridges according to their span length and transportation requirement. So, it has been widely applied as emergency transportation, temporary or permanent bridge. Its suitable load design is such like HS-15, HS-20, HS-25 and pedrail-50 etc.
Over 200 models for your choice. the leading manufacturer of Plastic Pallet, Box, Dustbin, etc.
We are established in 2002, the registered capital of 7 million RMB,cover an area of 136,000 square meters.
30 large injection molding machines, 50 patents, about 280 employee.
We aim to provide the best price & service to our each customers.
PVC foam sheet and PVC expansion sheet. OEM different styles and colors and can be shipped at any time. It can be widely used for industrial, furniture, table, chair, kitchen and other scene With ABS and PP material, you can guarantee for a long time.
PVC foam sheet has excellent impact resistance, very low water absorption and high corrosion resistance. It is used in various applications and is the best choice for indoor and outdoor wall waterproofing materials.
Graphite digestion instrument is one of the direct, effective and economical sample pretreatment methods for elemental analysis. The application of new heating technology has the advantages of rapid heating, program control, complete digestion, and temperature equilibrium.Â
Our devices are usually used in sample preparation for atomic absorption, atomic fluorescence, ICP, ICP-MS, polarography, etc.
7 advantages make sample preparation no longer difficult:
1. The fully enclosed design prevents heat loss to a large extent and effectively avoids the intrusion of acid mist;
2. High-quality graphite three-dimensional wrapped heating, samples are heated evenly;
3. Unique spraying process, the coating is uniform, firm, and will not fall off after long-term use;
4. Fast digestion and acid removal, high efficiency, and batch processing of samples;
5. PID digital temperature control system, excellent performance;
6. Easy operation, environmental protection and energy saving, cost saving
7. Split type: The controller can be placed outside the fume hood to reduce acid gas corrosion and have a longer service life.
Lamella clarifier also called inclined plate sediment tank. It is good at high efficient combined type settling tank; set many dense inclined tube packing to make the suspended impurity in water sediment, water rise flow along inclined tube, the separated sludge down to the tank bottom along the inclined tube by gravity, then discharge it in concentration. Such tank can improve sediment efficiency 60 70%, it can improve treatment capacity 3 5 times in the same area. It can design different flow rate inclined plate sediment device according to raw waste water test report, it need dose flocculant usually.
Available options
Flash mixing/flocculation tank with agitator
Full glass steel or stainless steel structure
Concrete tank design
Special coatings and plates
Integrated mechanical sludge thickener
Overhaul platforms and ladders
In-house laboratory analysis to optimize equipment
Drinking water design
Gasket and removable cover
Automatic desilting
Instrumentation and control
Chemical feed equipment
Sludge treatment and dewatering
Pilot size units for field testing
CNC dovetail tenoner machine, used for making wood furniture, wood drawer, wood box etc.
The dove tail tenoner size and shape are adjustable.CNC control.
Advantages:
1. X and Y spindle adopts imported international guide rail, ball screw driven structure, can work flexible and more stable and with high precision.
2. X and Y spindle adopts Delta high efficiency full servo driven system, work smoothly and stable.
3. Adopts Delta driven control system and touch screen HMI, easy operation no need special training. Can input and edit working parameters from touch screen.
4. Pressing system use 4 pressing cylinders, thus can ensure press wood tightly, and can have good working performance.
5. Use different cutter, renew program, can work round tenon, and long tenon etc
Function: 4 Axis double turning tools wood lathe with multi-functional flat engraving and rotary engraving and milling and automatic feeding/ polishing and drill sloping
holes(8 process) Can make chair legs ,desk legs ,sofa legs and so on
MTPU is microcellular TPU foam, produced using thermoplastic polyurethane (TPU) as the composition with clean supercritical carbon dioxide as blowing agent to form a large number of microcells in the matrix.
Characteristic:
YT-C type hydraulic storage tank lifting equipment is a set of large hydraulic lifting equipment specially developed by our company for national crude oil reserve project in 1994.As long as the number of hydraulic cylinder and pump station system is increased or decreased, this type of equipment can be applied to the inverted construction of large storage tanks with different volumes ranging from thousands of cubic meters to hundreds of thousands of cubic meters.
The control part adopts Siemens PLC modular design concept, simple operation, reliable quality.The hydraulic cylinder can be used for single or multiple lifting height adjustment, and can also be used for centralized control of multiple groups.Through more than ten years of practice summary, we continue to optimize the equipment, improve the production process, so that the product quality and performance greatly improved, the majority of users praise.
The overall structure of the equipment
1, The equipment is evenly placed inside the jacked tank. The overall force and lateral force of the equipment are calculated strictly and successfully applied.
2, The structure is rigorous and compact, the output force is adjustable, the jacking speed meets the jacking requirements, and the synchronization accuracy is high.
Working principle of the equipment
The transfer of force: output force of hydraulic cylinder steel wire rope rising ring (welded with lifting lug) rib plate for transferring force tank wall jacking
Jacking control process:
1, Pump station control box (rotating selection button) Centralized control operation box (Figure 1-3) hydraulic jacking pump station (solenoid of valve group) PLC devices centralized control operation box hydraulic jacking pump station integral or partial lifting or lowering of hydraulic cylinder.
2, Pump station control box (rotating selection button) control handle hydraulic cylinder (single or multiple) fine adjustment up and down.
Hydraulic Lifting Equipment for Tank Construction
We can satisfy all your requirements in polystyrene mouldings.
Warmly welcome customized orders
Pls feel free to contact us.
1.name:high quality plastic polystyrene decorative moulding home decoration skirting board baseboard
2. frame material:PS(polystyrene),Polystyrene by extrusion modified technique.
3. frame color:customized,colors are available
4.Surface: Hot stamping foil
5. frame length:2.90meters
6.� HACCP,ISO 9001:2008 Quality Management System,
7. frame style:Customer's designs are accepted.
8. high quality polystyrene moulding
9.creative and innovative team of technicians and designers
10. anti-corrosion & moisture-proof& eco-friendly&easy-installed
11.low weight-low freight
12.Used for picture frame,photo frame,mirror frame,painting frame,poster frame,document frame
13. Advantage:
environmental protection
B.recyclable material C.corrosion proof and toxin free
D. health and safety
14.Packing:
inner packing: each piece packed by PE foam
B outer packing: export standard cartons
Nylon square carpet
Fine workmanship, quality assurance, complete styles, support customization
Simple and fashionable, suitable for offices, meeting rooms, bedrooms, living rooms and other places
Seal o grip union air o union are air inflatable connections for low pressure fluid or mud suction and return lines. The seal o grip carbon steel body welds in place on mud tanks or manifold pipe. A leak-right seal is achieved with rig supplied compressed air, even if the connecting pipe is not perfectly aligned. The oil and abrasion resistant NBR pneumatic o tube can be inflated up to 200 PSI against the outside diameter of the connecting pipe, speeding field set up and eliminating the need for low pressure flanged connections.
Features
Low requirement to centered when installed, to achieve quick install and seal.
The pipeline can be removed without other tools after pneumatic union deflated, adaptable and easy maintenance.
