Sodium Silicate, also known as water glass, it has two forms: liquid and solid.The liquid is common, colorless clear or light gray deup. The solid is light blue or light green crystals, transparent or semi-transparent .Sodium Silicate is made from sodium oxide and silicon dioxide. Application: 1. Chemicals: Raw material for the manufacture of amorphous silica, silica gel, molecular screens and white fillers. 2. Detergents: Additive for alkalinity control and corrosion inhabition. 3. Textiles: (1)Stabilizer in bleaching with hydrogen-peroxide. (2)Metal sequestering agent. (3)PH regulator. 4. Paper: (1)Adhesive for corrugated cardboard. (2)Stabilizer in bleaching with hydrogen-peroxide. 5. Foundry: Binder of molding sands. 6. Mining: Additive for mineral pelletizing. 7. Construction: Floor consolidation. 8. Welding: Binder in manufacture of rods. 9. Metallurgy and Refractory: Materials Setting accelerator for cement and refractories curing ( gunited)
Introduction: 4-hydroxyethyl piperazine ethosulfonic acid (HEPES) is an important hydrogen ion buffer, which has a good buffer ability in the pH range of 6.8 to 8.2, and can control a constant pH for a long time. Using a concentration of 10 ~ 50mmol/L, the general culture medium containing 20mmol/L 4-hydroxyethyl piperazine taurine can have a good buffer capacity, and has no toxic effect on cells. Application: HEPES (4-hydroxyethyl piperazinethesulfonic acid) is a non-ionic amphoteric buffer with high polarity, and is inert to a variety of chemical reagents and enzymes. It does not participate in and interfere with the process of biochemical reactions, and has no inhibitory effect on enzyme chemical reactions. Therefore, it can be used specifically for the research of proteins and enzymes that are highly volatile and ph-sensitive to organelles and very volatile. Buffer solution preparation: (1)hepes buffer can be directly added to the prepared culture medium according to the desired concentration, and then filtered to remove bacteria. 2.38 g HEPES was added to each 1000ml of culture medium, the pH was adjusted to 7.2 with lNNaOH after dissolution, and the bacteria were removed by filtration before use. At this time, the concentration of HEPES was 10mmol/L. (2) 100x storage solution (lmol/L) could also be prepared. Before use, 99ml culture solution was added to lml storage solution, and the final concentration was 10mmol/L. lmol/L (100x) hepes buffer was prepared as follows: 23.8gHEPES was dissolved in 90ml double distilled water, the pH was adjusted to 7.5-8.0 with lNNaOH, and then the water was fixed to 100ml, filtered to remove bacteria, divided into vials (2ml/ bottle), and stored at 4�ºC or -20�ºC. Purpose: 1.Biological buffer; Reaction buffer, prehybridization buffer and hybridization buffer for isolation and analysis of RNA nuclear fraction; For RNA with T4RNA 2.Molecular biology grade is used for RNA3' -end labeling with T4 RNA ligase 3.Cell-cell adhesion, short-term cell aggregation culture, cleaning of tissue and cell buffer
Tetra Potassium Pyrophosphate, TKPP, metal cleaning agent Specifications Tetra Potassium Pyrophosphate Molecular Formula: K4P2O7 Molecular weight: 330.34 Standard executed: HG/T3591-1999 Tetra Potassium Pyrophosphate Packing: 25kg woven bag Volume/ 20FCL: 22MT Uses : It mainly applied to electroplating without cyanate, industrial or household detergents; It can used as a buffering reagent as well as stabilizer for hydrogen peroxide; It can also be used as dispersion agent for ceramic, clay, latex and pigments etc.
Trichloroisocyanuric acid disinfection performance is excellent, is a new generation of broad spectrum, high efficiency, low toxicity fungicide, bleach and shrink resistant agent. Mainly used for drinking water, industrial water recycling, swimming pools, restaurants, hotels, public places, families, hospitals, and prevention of fish disease, poultry eggs and other disinfection and sterilization. It can kill almost all fungi, bacteria, viruses and spores.
Methyl tert-butyl ether (MTBE) is a colorless, transparent, low-viscosity, volatile liquid with a distinctive odor and an oxygen content of 18.2%. lts vapor is heavier than air. Diffuses along the ground and burns when co-existing with strong oxidants. The main use of methyl tert-butyl ether is as an organic solvent and can also be used as a gasoline additive to make it more antiknock. Application ethyl tert-butyl ether (MTBE) is mainly used as gasoline additive, has excellent knock resistance, improves octane number, and can also be cracked to produce isobutene has good miscibility with gasoline, less water absorption, no pollution to the environment, can be improved as an analytical solvent, extractant, in chromatography especially high pressure liquid chromatography as a removal agent, and some polar solvents such as water, methanol, ethanol and other azeotrope formation. Mtbe also has a mild narcotic effect. Ethyl tert-butyl ether (MTBE) is mainly used as gasoline additive, has excellent knock resistance, improves octane number, and can also be cracked to produce isobutene has good miscibility with gasoline, less water absorption, no pollution to the environment, can be improved as an analytical solvent, extractant, in chromatography especially high pressure liquid chromatography as a removal agent, and some polar solvents such as water, methanol, ethanol and other azeotrope formation. Mtbe also has a mild narcotic effect.
Product Name: LITHIUM IRON PHOSPHATE CARBON COATED CAS NO.:15365-14-7 Appearance: Black Powder Purity:99% Melting Point:>300 �°C Application Due to the inherent structural stability of lithium iron phosphate, especially its unparalleled advantages in safety and cycling performance, batteries using lithium iron phosphate cathode materials can be widely used in multiple fields.
Sodium dodecyl sulfate is a kind of anionic surfactant, belongs to the typical representative of sulfuric acid ester surfactant, SDS for short, also known AS, K12, coconut oil, alcohol, sodium sulfate, lauryl sodium sulfate, foaming agent, sales of the commodity on the market are usually white to light yellow crystalline powder, non-toxic, slightly soluble in alcohol, insoluble in chloro-form, ether, soluble in water, with anionic and non-ionic complex compatibility is good, It has good emulsification, foaming, foaming, penetration, decontamination and dispersion properties, rich foam, rapid biodegradation, but the degree of water solubility is inferior to the fatty alcohol polyoxyethylene ether sodium sulfate (AES). Sodium dodecyl sulfate is the main component of dishwashing liquid. It is often used during DNA extraction to denature proteins and separate them from DNA.
Application: 1. Used as liquid ammonia stabilizer in refrigeration equipment, rocket propellant, oxidant in pyrotechnic manufacturing, glass etching agent, antistatic agent, molten salt component in metallurgical industry, etc. 2. Used as analytical reagent, dissolving and cooling agent, also used in the manufacture of phosphor. 3. Used in ceramics. Fireworks manufacturing. Molten salt bath. Rocket propellant. freezer. Analysis reagents. 4. Used in the manufacture of phosphors, heat exchange carriers, and other lithium salts. 5. Used as liquid ammonia stabilizer, molten salt component, etc. 6. Mainly used in the electroplating industry, used to make nickel batteries, organic synthesis and production of hardened oil as a catalyst for paint, make other nickel salt raw materials, used for metal coloring, and vat dye mordant.
Usage 1. Used as a raw material for special high-strength glass. Analytical reagents. Pharmaceutical industry. 2. Used as an analytical reagent, also in the pharmaceutical industry 3. Mainly used in the production of special high-strength glass, food and synthetic beverage flavoring agents Packaging Cardboard bucket, Net weight: 25kgper drum. Storage Storage conditions: To be stored in Cool, dry and ventilated location and protected from light.
The utility model is used for manufacturing welding materials, air conditioning equipment and raw materials for manufacturing lithium metal. Used to make fireworks. It is also used as an analytical reagent, a heat exchanger It is used for air conditioning, pyrotechnics, dry batteries, and lithium metal The use of anhydrous lithium chloride is mainly used in molten salt electrolysis of lithium metal raw material, welding agent catalyst and dehumidification agent, special cement and polymer materials production of polyphenylene sulfide and other fields also used in aluminum. It is used as raw material for preparing lithium metal, used as welding agent for aluminum, air conditioner dehumidifier and special cement raw material
Industrial lithium carbonate is used in the manufacture of other lithium salts, such as lithium chloride and lithium bromide and so on. It also acts as lithium oxide materials in enamel, glass, pottery and porcelain enamel, and it is also added to the electrolytic cell for electrolysis of aluminum to increase the current efficiency and reduce the internal resistance of the cell and the bath temperature. Battery grade lithium carbonate is mainly used for the preparation of lithium cobalt oxide, lithium manganese oxide, ternary materials, lithium iron phosphate and other lithium ion battery cathode materials.
Fatty alcohol polyoxyethylene ether, levelling agent O also known as flat plus O, is a non-ionic surfactant, the appearance of milky white or beige paste, high molecular weight, solid (can be made into flake solid according to the requirements), easily soluble in water, ethanol, ethylene glycol, turbidity point, PH value of 1% water solution is neutral. Resistant to acid, alkali, hard water, heat and heavy metal salt. It has strong evenness, slow dyeing, permeability and diffusivity for all kinds of dyes. It can be used in the same solution with all kinds of surfactants and dyes. Appearance milky white, beige paste or solid shape PH 6-8 turbidity point 91-96 Applicationï¼? 1. As a non-ionic surfactant, the washing industry plays a role in emulsification, foaming, and decontamination. It is the main active ingredient of hand sanitizer, laundry detergent, shower gel, laundry detergent, detergent, and metal cleaning agent. 2. As a textile printing and dyeing auxiliary agent, the textile printing and dyeing industry plays an emulsifying role: emulsified silicone oil penetrating agent, leveling agent, polypropylene oil agent. 3. As a deinking agent, carpet detergent, and resin remover in the papermaking industry. 4. Other products such as pesticide emulsifiers, oil demulsifiers, lubricating oil emulsifiers, etc.
What is Sodium octanoate ? In the pharmaceutical industry, biological agents (human albumin) contain sodium caprylate as an inactive ingredient. In biological aspects, higher acid salts are generally used for special breeding of bacterial species. The reason why salts are used is that salts have greater solubility than higher acids themselves. And the PH value is better adjusted. For example, when breeding bacteria that can degrade caprylic acid, sodium caprylate needs to be added to the culture medium. Application of Sodium octanoate Sodium caprylate is used as a protein stabilizer in biological preparations.
Hexahydro-1,3,5-Tris(hydroxyethyl)-S-Triazine is a triazine derivative contained in cutting fluids. It is a formaldehyde releaser. Hexahydro-1,3,5-tris(hydroxyethyl)-s-triazine is an amine and an alcohol. Amines are chemical bases. They neutralize acids to form salts plus water. These acid-base reactions are exothermic. The amount of heat that is evolved per mole of amine in a neutralization is largely independent of the strength of the amine as a base. Amines may be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen is generated by amines in combination with strong reducing agents, such as hydrides. Hexahydro-l,3,5-tris-(2-hydroxyethyl)triazin is used in organic synthesis; as a bactericide in cooling fluids and various cosmetic products; formaldehyde liberator. Hexahydro-1,3,5-tris(hydroxyethyl)-s-triazine is probably combustible. It is a triazine derivative contained as a bio cide in cutting fluids. It is a formaldehyde releaser. Dermatitis, delayed-type allergic conjunctivitis, and asthma were described.
Astaxanthin is a carotenoid compound naturally found in marine organisms and is often used as an ingredient in health care products and cosmetics. Astaxanthin is a red fat-soluble carotenoid with a molecular formula of C40H52O4 and a molecular weight of 596.84. It exists in various marine organisms, including large yellow croaker, salmon, river shrimp, lobster, etc., and can also be extracted from certain microorganisms. Astaxanthin has high antioxidant properties and has a strong scavenging effect on free radicals, ROS (reactive oxygen species) and monocytes. Antioxidant effect: Astaxanthin is a powerful antioxidant that can reduce the production of free radicals and reduce the damage to cells caused by oxidative stress, helping to prevent various diseases and slow down the aging process. Cardiovascular protection: Astaxanthin can reduce cholesterol accumulation and oxidative damage, which is helpful in preventing atherosclerosis, hypertension and other cardiovascular diseases. Enhance immunity: The antioxidant properties of astaxanthin can enhance the function of the immune system, improve the body's immunity, and help prevent infections and diseases. Improve skin: Astaxanthin can improve skin elasticity and gloss by reducing the production of free radicals and stimulating collagen production, which is helpful in preventing skin aging and wrinkles. Relieve eye problems: Because astaxanthin can penetrate the tissue of the eye, it has a certain effect in protecting and relieving eye problems, such as reducing eye fatigue and improving vision.
D-Chiro Inositol (DCI) is a member of a family of substances referred to as inositols and generally considered to fall within the B vitamin complex.It can be found in small amounts in a range of foods such as buckwheat, chickpeas, soya lecithin, pumpkin and pumpkin seeds as well as in the Ayurvedic herb bitter melon (momordica charantia). It is also produced by healthy human bodies from d-pinitol and myo-inositol, both of which are relatively abundant in the average diet. It is a nutrient found in the body itself, which allows the body's cells to recognise it better and not reject it. 1994, the US Dietary Supplement Health and Education Act approved D-chiral inositol as a dietary supplement.
Potassium formate is a useful chemical compound in the production of potassium metal and in the oil and gas industry, often in aqueous solution (alone, or mixed with cesium formate), to yield a high-density, environmentally-friendly brine that can be used a heat transfer fluid. Potassium formate is available as both a solid and in solution form. Standard Result CsCOOH , not less than 80 >80.00 Ca 0.05
Stabilizer; Thickener; Emulsifier; Dispersant; Gelling Agent; Coating Agent; Suspending Agent. It is used in ice cream and cold spots in Japan to improve the shape retention and make the tissue fine. The dosage is 0.1% to 0.4%. When making fillings, it can impart cohesiveness, and its dosage is 0.1% to 0.7%. Because it is a hydrophilic polymer, it has strong hydration properties, which makes it difficult to form ice crystals from the water absorbed by the stabilizer. Used in the United States for pie fillings, meat sauces, gravy, frozen foods, chocolate, butter flavored hard candy, cold spot gels, jelly gums, syrups, emulsions, etc. The dosage is 0.1%~ 0.5%. In beer production, it is used as a solidification remover of copper, and at the same time it is removed after agglomeration together with protein and tannin. It can be made into film for anti-sticking packaging of candy.
Pyruvate is a component of the human body that mainly participates in the metabolism of sugars, fats, and other substances. It is also one of the intermediate products of carbohydrate metabolism. Pyruvic acid and its generated salts are widely used in the pharmaceutical field, used in the production of sedatives, antioxidants, antiviral agents, synthetic drugs for treating hypertension, and so on.
Octacosanols are organic compounds with the formula CH3(CH2)26CH2OH. The appearance is white powder or scaly crystal, tasteless and odorless. Soluble in hot ethanol, ethyl ether, benzene, toluene, chloroform, methylene chloride, petroleum ether and other organic solvents, insoluble in water. In addition, octacosanol is stable to acids, bases, reducing agents, and is stable to light and heat, and is not easy to absorb moisture. Octacosanol is a high-level fatty alcohol, is a simple saturated straight chain alcohol, composed of hydrophobic alkyl and hydrophilic hydroxyl groups, chemical reactions mainly occur on the hydroxyl group, can be esterified, halogenated, thiolated, dehydration hydroxylation and dehydration into ether and other reactions.