4.3 Inch Wrist CCTV AHD and Analog Camera Tester (CT600AHD) Description: PAL/NTSC Auto Adapt for Analogue Cameras and AHD Cameras Support AHD 1080P/960P/720P and CVBS cameras Support 1ch Audio Test Support UTP cable test 5VDC output for mobile phone 12VDC output for CCTV Camera MINI USB Universal Charging Port Low Power Consumption Auto Sleep In 3 Minutes Without Signal Rechargeable Li-ion battery 3.7v, 2600mA replaceable. Power Output:Temporary Power Output 12V 1A DC
The video ground loop isolator gb100 is passive device which reduces ground loop interference with cctv signals and can easily install in a new or added to existing systems. It is useful where a video signal is transmitted via cable between points with different ground potentials. Differences in ground potentials are typically caused by unbalanced power line loads. Features: Bnc male to bnc female with mini cable 25cm on both sides Passive, no power required Prevents video-signal distortion caused by video ground loops Eliminates picture tearing, cross talk and rolling Prevents power cables laid by others interfering with the cctv system Built in tvs (transient voltage suppressors) for surge protection Built in video filter, perfect to work with dvr to immunity dvr interference, for extra interference rejection Others same as ground loop isolator function Technical specifications: Insertion loss 0.5db Frequency response 20hz- 10mhz, +0/-3db Input resistance 75 ohm Output resistance 75 ohm Isolation voltage 600vdc (min) Insulation resistance 100m ohm Transient voltage suppressor 12 vrms C (mm) 55*28*20 with 25cm*2 cable Material Abs black Installation view The video ground loop isolator should be installed where runs of video cable are known to have ground loops. It must be installed in the video cable that has come directly from the camera, but before the cable has been connected to anything else. If several video cameras come from the same area, fix a video ground loop isolator in every cable, or a ground loop will still remain. Size:55*28*20 with 25cm*2 cable
Features: 1. high definition low noise processing chips 2. superior ambient noise suppression microphone 3. adjustable sensitivity metal 4. explosion sites dedicated 5. built-in noise reduction circuit 6. power polarity protection circuit; Specifications: BrandChinasky Model number506 Work voltage6 ~ 14vdc Work current12ma Frequency200 ~ 10khz Output impedance600| Pickup range50~100m2 Work temperature-20 Package dimension45x45x19mm MaterialMaterial ; What is our micrphone for? This audio surveillance microphone can be added to any surveillance system with audio input. The cctv microphone is typically used as an add-on to cctv cameras that do not have built-in audio. ; This microphone is stand alone as it does not rely on the power source from a security camera. Plug and play cables can be used with these microphones to easily run both the audio and power centrally back to the dvr. ; The mic comes with its own 12v dc power supply and can be used with cctv camera pros stand alone surveillance dvrs or pc based dvrs, such as geovision. ; Because the microphone has a female rca input and most dvrs have rca inputs for the microphone inputs, we include two bnc to rca converters for each end of the plug and play cable. Order the cable with this microphone and the converters are included. See the below audio surveillance connection diagram for more information. Size:45x45x19mm
Crimp Male CCTV BNC Connector for Coaxial Cable (CT5045) Description: BNC Connector: BNC Male Crimp on Connector, 3 pieces Two-step ferrule with strain relief crimp Material: Body-zinc alloy, nickel plated Ring-copper, nickel plated Center pin-copper, gold plated Net Weight: 6g/piece Crimp Male CCTV BNC Connector for Coaxial Cable (CT5045) Description: BNC Connector: BNC Male Crimp on Connector, 3 pieces Two-step ferrule with strain relief crimp Material: Body-zinc alloy, nickel plated Ring-copper, nickel plated Center pin-copper, gold plated Net Weight: 6g/piece Net Weight:6g/Piece
4K resolution, 6-300mm lens, 50x optical zoom, optical defog optional,
2Mp, 6-540mm lens, 50x optical zoom, optical defog optional.
2Mp, 10-860mm lens, 86x optical zoom, starlight feature. World first block camera which can meet above 750mm lens.
Description: 8GE POE+2SFP. Comply to IEEE 802.3, IEEE 802.3u, IEEE 802.3ab. Comply to POE IEEE 802.3af/at standard, all ports standard testing. Support POE IPC camera, POE WIFI AP, and POE IPPHONE. Fluid Control: Full-duplex: IEEE 802.3x, Half-duplex: back pressure. Auto MDI/MDIX. Upstream port lightning protection. MAX 30W, MAX power 120W. Store-and-forward. All ports support wire speed switch, jumbo frame transmission. Zero QFD, self-adaption. Panel lights can monitor operative mode and malfunction analysis. Specifications: Electric Port 1000M POE 8 SFP 2 Function Exchange Mechanism Store-and-forward Exchange Capacity 16G MAC 4K Environmental Working Temperature:0?~40? Storage temperature :-40?~70? Working Humidity :10%~90% RH non-condensing Storage Humidity:5%~90% RH non-condensing POE IEEE802.3af/at, MAX 30W, MAX power 120W power DC52V 2.5A AC 110~220V 50/60HZ Network protocol IEEE 802.3X IEEE 802.3i 10BASE-T X IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T G IEEE 802.3z 1000BASE-X G IEEE 802.3af /IEEE 802.3at IEEE 802.3x Flow control Default Mode Common switch Match VLAN isolation Speed Ethernet 10Mbps half-duplex, 20Mbps full-duplex Fast Ethernet 100Mbpshalf-duplex, 200Mbps full-duplex Gigabit Ethernet 2000Mbps full-duplex Network Media 10Base-T: Pair 2 Category 3(cat 3) and above UTP/STP(=100m) 100Base-TX: Pair 2 Category 5(cat 5) and above UTP/STP(=100m) 1000Base-T: Pair 4 Category 5 (cat 5e)and above UTP/STP(=100m) 1000Base-SX:62.5µm/50µm MMF(2m~550m) 1000Base-LX:62.5µm/50µm MM(2m~550m) or 10µm SMF(2m~5000m) Physical Specifications Product Size:225mm*105mm*32mm(L*W*H) package Size:300mm*175mm*100mm(L*W*H)
1CH CCTV Passive HD-AHD/CVI/TVI Video Balun Features Compatible with all HD-CVI, HD-TVI, HD-AHD and analog cameras Up to 450m for 720P CVI Cameras Up to 250m for 1080P CVI Cameras Up to 250m for 720P/1080P TVI Cameras Up to 320m for 720P AHD cameras NTSC, PAL, and SECAM video formats No power required 60dB cross talk and noise immunity. Compact size and easy installation Built-in transient suppression protection Technical specifications: Video Format HD-CVI/TVI/AHD, NTSC, PAL, and SECAM Frequency Response DC to 60MHz Attenuation 0.5dB typ CMRR 60 dB Surge protection 4KV ESD 8KV Impedance Coax, Male BNC 75 ohms Terminal Block 100 ohms Working environment Working Temperature -10? to +50? Storage Temperature -30? to +70? Humidity 0 to 95% Wire Type UTP CAT5, CAT5e, CAT6 UTP Connection Screw Terminal blocks Power No power required Case ABS Plastic Dimension 31mm*14mm*16mm(excluding connectors) Weight 45g/pair
Descrition: The CCTV power supply is primarily designed for WUF-GV, PTZ and camera of CCTV system. It’s also used for access, building/house control, intrude alarm and other light-current device. Technical specifications: Model S1230D Power 36W Dimension 111x53x32cm Net Weight 180g(without AC cord) Type Desktop Input Input Voltage 100-240VAC Input Voltage Frequency 50Hz-60Hz AC Cord 1.2m AC plug EU, or US, or UK, or South African Type Output Output Voltage 12VDC±5% Output Current 3A DC cord 1.2m DC plug 5.5*2.1*12mm Regulated Yes Circumstances Working Temperature 0?-+50? Storage Temperature -20?-+80? RH 20%-%
Description: Female DC plug with screw terminal, DC Socket 2.1mm female Power Plug with Built-in Screw This CCTV camera power connector is from one power connector end DC jack female to another end terminal for CCTV camera connection. Net Weight: 8g/piece PP Bags
Combinable CCTV Passive HD-AHD/CVI/TVI Balun (VB105PH) Features Compatible with all HD-CVI, HD-TVI, HD-AHD Cameras and analog Cameras Up to 450m for 720P CVI Cameras Up to 250m for 1080P CVI Cameras Up to 250m for 720P/1080P TVI Cameras Up to 320m for 720P AHD cameras NTSC, PAL, and SECAM video formats No power required 60dB cross talk and noise immunity. Compact size and easy installation Built-in transient suppression protection Innovative combinable design Technical specifications: Combinable CCTV Passive HD-AHD/CVI/TVI Balun (VB105PH) Video FormatHD-CVI/TVI/AHD, NTSC, PAL, and SECAM Frequency ResponseDC to 60MHz Attenuation0.5dB typ CMRR60 dB Surge protection4KV ESD8KV ImpedanceCoax, Male BNC75 ohms Terminal Block100 ohms Working environmentWorking Temperature-10? to +50? Storage Temperature-30? to +70? Humidity 0 to 95% Wire TypeUTP5 UTP ConnectionTerminal blocks PowerNo power required CaseABS Plastic Dimension33mm*17mm*16mm(excluding connectors) Weight 50g/pair
CCTV DVR,NVR,IP camera and Analog camera(AHD and XVI).
Thermal imaging rugged PTZ camera, HD IP/ SDI speed dome camera, IP auto tracking/ High speed dome camera, Analog auto tracking/ high speed dome camera, auto tracking classroom lecture camera, video conference PTZ camera, weatherproof rugged PTZ camera, CCTV camera.
CCTV.
Biometric scanner, biometric afis, fingerprint scanner, single digit optical fingerprint scanner, face recognition algorithm, facial identification technology.
Mega pixel camera, IP camera, IP speed dome, mega pixel speed dome, DVR, NVR, CCTV, encoder, encoder, DVR card, video card.
Security products, like standalone security display stand, security controller & sensor, mechanical security, security hooks.
Cctv camera lens, automotive lens, machine vision lens, infrared lens.
Wifi smart doorbell, wifi baby camera, wifi indoor and outdoor camera.