Al Steel strapping Wiper blade steel strip e.T.C. Awaiting your email or call echo by rockyyang(at)gdgwsteel.Com or +8613983233991. Thanks in advance. Coil weight: 250kg, coil id: 400-508mm, coil od: 600-1500mm all of these can be customized.
1.40x60 1.45x60 1.50x60 Item3 steel coil formed packing Packing: each coil wrapped with water-resistant compound paper, Then 10-13 coils bunched as a pallet with plastic film packaged then for standard seaworthy packing If you need this material now, pls contact us with rockyyang(at)gdgwsteel.Com or +8613983233991 Item2 : Id: 400mm ; od: 600-800mm ; coil weight: 250kg ; 10-13 coils bunched as a pallet. Each pallet: 2 ton max Coil core inner dia.: 400mm Od: 650mm 10-13 coils a pallet.
Main specifications: Thickness: 1.0mm, 1.1mm, 1.2mm, 1.25mm, 1.3mm, 1.4mm, 1.5mm, 1.6mm, 1.65mm Width: 30mm 40mm, 45mm, 50mm, 55mm, 60mm. Surface: blue, polished blue hardness: 44-48hrc edge: rounded More details: Standard of surface:no flaw, burr, rust Coil weight: 200-250kgs or as buyer's requirment Coil id: 400-500mm Pallet weight: as buyer's requirement
Grade:ck50, ck55, ck60, ck67, ck75, c75cr1, 60si2mn, 50crv4 Size:0.25-2.5mm*8-300 Annealed: hardness
Material grade: CK45, CK50,, CK67, CK70, CK75, 65Mn, 3Cr13,50CrV4 Thickness: 0.15mm to 3.0mm, tolerance max +/-0.01 mm Width: 6.0mm to 600mm tolerance max +/-0.1mm Finish: nature, bright, grey, polished Hardness: 21-28HRC for cold rolled process, 30-52HRC for hardened&tempered process,below 20HRC for anneal process, according to user`s requirements Edge: slit, round, square Packing: each bundle with anti-rust paper and light oil then wrapped in plastic film with metallic pallet and put in 20ft container for standard sea worthy Standard: GB, JIS, DIN Application: roller shutter spring, bandsaws,spring clips,construction tools, filler knife,agriculture tools etc. Flat surface and uniform hardness Each bundle with anti-rust paper and light oil then wrapped in plastic film with metallic pallet and put in 20ft container for standard sea worthy
Materil: 50#,65Mn, special ck50,ck60,ck75,ck95, and T8, T10A. 1. Thickness: 0.2mm to 1.5mm 2. Width: 300mm to 520mm.
Hr strips Commodity: hot rolled strips Grade: q195, q215, q235 Size(mm) : 1.5-2.0*174-183*c, or 2.5and above*145-204*c Quantity(mt): 1000-2000 Price: usd393/mt , or usd415/mt fob, subjected to final comfirmation Mill standard export packing
Material: M42, D6A, X32, M51 Technical process: cold rolling, laser welding,teeth punching(per request). Thickness:0.635/0.889/0.9/1.07/1.21/1.35/1.47 Width:12/27/29/34/38/42/45/51/63/80 Hardness: per request MOQ:500kgs Delivery time: 35-45days Package: Standard sea worthy packages Factory: yes
Matereials: SAE1045,SAE1050,SAE1055,CK75 Technical process: Annealing, hot rolled, cold rolled, heat treatment Hardness: Per customer request Thickness: 0.5-4.0mm Widthness: 4-400mm(For over 400mm, need check per case) Tolerance:+/-5% Package:Sea standard worthy package. Delivery time: 25-35days MOQ:2000KGS
Product Overview Black painted high carbon c67 c70 c75 steel strip GuangWeiYouLiang's Black painted high carbon steel strip is processed by annealed and cold rolled high carbon steel strip Size: thickness 0.5-0.6mm, material grade ck75 ck67 ck55 ck50, typically used for auto speaker, speaker's external cover,surface is painted as black to meet customer's demand and statisfied with request for anti-rust, hardness less than 32 HRC, with slit/ round/ square edge avaible, GuangWeiYouLiang's Black painted high carbon steel strip also used for stamping, washers,clips and other uses. Decription: Material grade: ck90 ck85 ck75 ck67 ck55 ck50 ck45 Width: 8-300mm thickness: 0.08-3.00mm Hardness: < 32HRC Edge: slit round or square
Product Overview Wiper blade steel strip GuangWeiYouLiang is professional in manufacturing steel strip for wiper blade. this special kinds of material grade, For match customer's expections of providing the best quality including straightness, smooth surface,capable for anti-rust, and good service on after sales, we adopt advanced facilites to assist production, so accurate degree, mechanical properties can be controlled. Annual output over 20,000 tonnes, we have abosolutely advantage on price, meantime quality is guarranteed. Details below for reference: 1. steel coils for wiper blade materials 2. 0.8mmX14mm 0.9mm X14mm 0.8x15mm Meter/KG Width 14mm 15mm Thickness inch 0.55" 0.590" 0.8mm 0.031" 11.3 10.6 0.9mm 0.035" 10.1 - 7 0.7 7 0.8 7 0.9 7 1.0 12 0.5 12 0.6 12 0.7 12 0.8 12 0.9 12 1.0 12 1.2 14 0.7 14 0.8 14 0.9 14 1.0 16 0.7 16 0.8 16 0.9 Unit: mm Application: 3. materials grade: prime steel 4. edge: slitted/ burr-free 5. surface: smooth without rust.
Product Overview Colored steel strapping GuangWeiYouLiang's Colored steel strapping has strong strength in manufacture colored steel strapping, its tensile strength of range is 800-1250Mpa, The product is made from prime carbon steel via cold-rolled, heat treatment,,painted and waxed, the painted and waxed steel strapping has more anti-rust capacity than blue tempered steel strapping, it's applicable for bundling and packing wood, paper, glass, stone,welded pipe,plywood.timber,steel/bar/sheet/coil and so on, Wound type of packing: Ribbon/Oscillate/Jumbo styles, Testing report : 1. Color : green, black, brown, color can be customized, 2. Surface: waxed +painted 3. Meter/kg: all ranges of width: 9.5-40mm, thickenss: 0.4-2.0mm are available. universal sizes as below: meter/kg width 12.7mm 16.0mm 19.0mm 25.0mm 31.75mm thickenss inch 1/2" 5/8" 3/4" 1" 1 1/4" 0.40mm .015" 25.08 19.9 - - - 0.50mm .020" 20.06 15.29 13.41 - - 0.60mm .023" - 13.27 11.17 8.49 - 0.70mm .028" - - 9.58 7.28 5.73 0.80mm .031" - - 8.38 6.37 5.02 0.90mm .035" - - 7.45 5.66 4.46 1.00mm .040" - - 6.70 5.10 4.01 1.20mm .047" - - - - 3.33 Colored steel strapping can be used in auto or semi-automatic/ full automatic packing machines. 4. Packing methods: Each bundle firmed by steel strip with metal clips, 5-10 coils wrapped with water-proof compound paper, put in metal pallet for standard seaworthy transporation, 5. Its applications as below:
Product Overview Shoe accessories C45 C50 C55 C60 C67 steel strip GuangWeiYouLiang(Gdgwsteel) was manufacturing C45 C50 C55 C60 C67 steel strip for shoe accessories for many years,material grade melted and made according to DIN standard, applications including shoe's shank, insole safety metal toe cap for safety shoes, material's properties as below: Item Chemical Composition C45 C(0.42-0.50%) Mn(0.5-0.8%) Si(0.17-0.37%) S&P(
Product Overview GuangWeiYouLiang is a expert for Annealed steel strip, annealed steel strip is heated to a pointed temperature and holding time a while, then it is keeping a cooling process. The annealed steel is heated to the steel phase transformation temperature. In the meanwhile, the technology inlcuding : ---Full annealing, ---Spheroidizing anneal, ---Isothermal annealing, ---Graphite annealing, ---Diffusion anneal, ---Stress relieving and annealing after welding, Customers requested to full anneal and spheroidizing anneal mostly, as these two technologies widely used for low-medium carbon steel strip or high carbon tools steel as well as stainless steel strip, ---GuangWeiYouLiang's full anneal is for low-carbon steel of refinement by casting, forging and mechanical properties after welding of thick overheating tissue, material grade like: ck45 ck50 ck55 ck60 these steel strip annealed typical application for: metal washers, shoes toe metal cap/shank/insole/lumbar/eyelet, strips for compressor body, ---GuangWeiYouLiang's Spheroidizing anneal prepare for the final heat treatment (quenching and tempering), material grades are ck67 ck70 ck75 ck80 ck85, the end uses like: spring baskets, metal clips, bucket hooker, metal hooker, shutter spring steel strip, bandsaw steel strip, wiper blade steel strip etc. Typical application for : metallic clips, electric appliances (radiator, handle), washers, metal compressor, fastsen tools,shoe accessories…
Product Overview Cold rolled steel strip GuangWeiYouLiang's Cold-rolled steel strip is hot rolled coil as raw material at room temperature below the condition of recrystallization rolling, including board and roll Strip after pickling in the cold rolling mill rolled to finished thickness, typically without intermediate annealing, each rack (or pass) reduction rolling according to the pressure distribution, power and speed mill promised, taking into account the yield , quality and other factors making. One of most important factor is Lubrication Technology in the production: Lubrication and cooling effect. Generally with good cooling performance emulsion, good lubricating performance when rolling thin or hard metal pure oil lubricants, Our cold-rolled steel strip has these features: high straightness, nature bright surface finish, surface clean and bright, no burr, rust, sand hole, and break easy-to-perform coating processing, but also has high performance and not punching aging characteristics of low yield point, GuangWeiYouLiang's Cold rolled steel coil with a wide range of uses, mainly used in the automotive, printing drum, construction, building materials, bicycles, and other industries. Specifications: Material grade: c45 c50 c55 c60 c67 c70 c75 c80 c85 c90 420J 50CrV4 60Si2Mn. Width: 4mm-320mm tolerance+/-0.05mm thickness: 0.08mm-4.2mm tolerance +/-0.01mm Coil weight, external/internal diameter, packing method, can be customized.
Product Overview Blue shutter spring steel strip(hardened and tempered) GuangWeiYouLiang`s steel strip for shutter spring is well-know good quality for rolling shuter application. shutter spring also called ---roller shutter flat spring, ---rolling shutter door spring, ---hardened&tempered spring steel strip, ---cold rolled tempered spring, ---blind door flat spring, ---blue shutter spring steel strip We understand that the flexibility is the key for shutter spring when the door rolling down and rolling up and strip steel can't be broken when bending. Every month, we export hundreds of tons of strip steel worldwide for this use and We have great and full experience, knowing how to solve these problems and to avoid this problems. From first-rate raw material, cold rolling, quenching and tempering process, de-burring edges, etc, each production step, is checked carefully in width, thickness, hardness, edge and flexibility. Spring steel strips ( material grade c67s and c75s) are most suitable for making shutter spring.Our customer from S/N America, Eastern Europe, Middle East over 40 countries. Clients prefer specifications requirements as below or customized: I. Material grade: c67s, c75s 60Si2Mn, II. Surface: blue III.Specification: Thickness: 1.20- 1.70mm Width: 30-70mm IV. Packing: Coil weight: 80-150 kg Coil ID: 400 mm Coil OD: 650 mm Per pallet weight: 2.0-2.5 tonnes Each coil packed by steel strapping, with light oil then wrapped with water-proof compound paper, 8-15 coils put on metal pallet for standard seaworthy transportion.
Product Overview CK75 spring steel strip GuangWeiYouLiang's wooden bandsaw steel strip. meanwhile we also able to supply prime c75 spring steel strip, sae1075 steel strip as well as aisi1074 spring coils available, which typically used for for bandsaw blade,Africa hard wood cutting blade,timber, high speed bandsaw blade, construction tools(scraper,spatulas,trowel,putty knives ) and so on: Application : -Material grade:ck75 c75 c75s sae1075 aisi1075 -Width: 4.0mm thru 300.0mm -Thickness: 0.08 mm thru 3.00 mm -Tensile strength: 1300-1680Mpa -Hardness: 43-52 HRC -Surface:polished bright surface, polished blue, nature blue or nature, most used steel strip's dimensions as below : Items Size I 0.6mm x 10mm 0.6mm x 13mm 0.6mm x 15mm II 0.7mm x 15mm 0.7mm x 20mm 0.7mm x 25mm III 0.7mm x 30mm IV 0.8mm x 30mm 0.8mm x 35mm V 0.9mm x 40mm 0.9mm x 45mm 0.9mm x 50mm VI 1.12mm x 200mm VII 1.2mm x 300mm sizes can be self-definited
spring steel strip GuangWeiYouLiang`s spring steel strip is well-know for these applications. ---Springs(flat shutter door spring, toy springs, clips), ---Saw blade(hacksaw, band saw, mower cutting saw, wooden cutting saw), ---Building tools(scraper, mud trowel blade), ---Stampings, clips,hose,clamps,ceiling plaster hooks, Heat treatment with processes of cold rolled, queanched and tempered to meeting requested of hardness(HV),flexibilty and durable, antifatigue. we can change steel strip of color into blue,bright, yellow, black, etc. and ---Edge: slit, round, squre edge, one side round the other side square, ---Hardness: 40-52Hrc ---Size: 0.15-3.0*8-300mm Material grade spring steel strip C :0.42%~0.95% like ck45, ck50, ck60, ck67, ck70, ck75, ck80, ck85, ck90,
Nuestra fã¡brica guangzhou shi guang wei you liang co., ltd; fabricamos todo lo que son fleje de acero para fabricaciã³n de resortes, plantillas de zapatos, punteras, etc. Estare dejando un breve detalles: Producto: recocido en fleje de acero Grado de acero: ck67, sae1075, ck75, c67s, c75s, etc. Dureza: 180hv (es el calor cuando se fabrican el metal) Espesor: 0.08 milimetros hasta 4.00 milimetros. Ancho: 2 milimetros hasta 320 milimetros. Superficie: pulido brillante Bordes: hendidura. Aplicaciã³n para muelles, clip, pin, insertos, zapatos, cuã±as, puntera, componentes de automã³viles, etc.
Nuestra fã¡brica fabricamos todo lo que son fleje de acero para fabricaciã³n de resortes, muelles de persiana, plantillas de zapatos, herramientas de construccion, herramientas de agricolas, etc. Estare dejando un breve detalles: Producto: endurecido & templado en fleje de acero Grado de acero: ck67, sae1075, ck75, c67s, c75s, etc. Dureza: 40-55hrc (es el calor cuando se fabrican el metal) Espesor: 0.08 milimetros hasta 3.00 milimetros. Ancho: 2 milimetros hasta 300 milimetros. Superficie: natural, azul, amarillo, blanco y pulido. Bordes: hendidura, redondeado y cuadrado. Aplicaciã³n para obturador de persiana, tambores de persiana, sierra cinta, raspador, espã¡tulas, plantillas de zapato, cuchillos, diferentes tipos de resortes planos, etc.
