Product Code: ITS-EM18 It is the best representative E-type motor, As a basic E-type motor, all angles can be available even along with those of competitors. An excellent straight handpiece can be well matched together. Targeting at clinical, beauty and laboratory. Feature: - Power Supply: AC 110V or 230V, 50/60 Hz - Fuse: 2A - Weight: 3.0kg - Speed Range: 1000~35000 R.P.M - Anti-friction carbon brushes Motor - Multipurpose for polishing, surgery ,casting and finishing surface - Simple and eaITS operation. Package includes: Control unit Handpiece Foot pedal Handpiece Stand Power cord (optional at European plug or North American plug).
Feature: Protable Bidirectional vascular doppler with LCD,displaying realtime bloodstream speed curve,built-in microprocessor. It can be used to listen the temporo-mandibular joints (They become noisy when they start to brake because of the bite problems), assist doctor to check the conditions of the joints and predict the result of treatment. Choose menu by pressing keys to start the detection, store 30 curves Handy key on the probe to freeze the curve and data and turn on/off the machine Choose different probes for different use (5, 8, 10 MHz). Automatic power off, special RS-232 port. Analyze the curve and data by V-LINK software. Colro box.
SY Ball Bearing Contra Angle has two built-in ball bearings which makes it low noise, less vibration while revolving. It can work better and longer. Cost benefit ratio with this excellent handpiece is unmatched, because its manufacturing is performed in our 3,000 square meter factory in the international city Guangzhou. Body size£ºØ 7.6 * H 13.35 Bur size£ºØ 2.35 Chuck£ºlatch type Ratio£º1:1 Air pressure£º0.3MPa External Water Spray For burs(¦µ2.35) Rotate speed£º18,000 ¨C 25,000 r.p.m.
Innovation not only brings convenience to professionals, but with more surprises. Now our new product SY-E 1:1 Contra Angle handpieces with Push Button have been using in dental offices. Every clinician finds it convenient and flexible to their diversified needs. SY-E 1:1 Contra Angle handpieces with Push Button are NSK compatible and work perfectly with least vibration. As it is directly from our own OEM division ASPIRELABS, you can find the lowest possible price, It also weighs less than most others and some other features are below for your reference. The following is other tech information. Features: Body size£ºØ 7.6 * H 13.35 Bur size£ºØ 2.35 (CA bur) Chuck£ºpush button Ratio£º1:1 Air pressure£º0.3MPa Rotate speed£º18,000 ¨C 25,000 r.p.m.
Traditional fiber optic handpiece cannot work without wire. Now our revolutionary new product E-Generator Fiber Optic Handpiece brings light without wire. This Handpiece has an internal Air-Driven Generator, which supplies fiber optic to light the tip of the handpiece. NEW SY E-Generator Fiber Optic Handpiece high performance 25,000 LUX. It also offers triple water spray. Improving visibility and cooling where you need it. 1. Super torque, standard head, mini head 2. 2 Hole/ 4 holes 3. Triple water spray 4. Fibre optic handpice with Air-driven generator inside; 5. Push button 6. Ceramic bearing 7. Noise Level: less than 70dB 8. Net weight: 88g 9. Torque Head Height 12.55 mm 10. Torque Head Diameter 14.4 mm 11. Air Pressure: 250-300Kpa 12. Rotation Speed: 310,000-350,000 RPM. Please contact us through SYdentistry website directly; we will get back to you within 24 hours.
Older generation low speed straight handpiece rolls over on a table top easily, and the new design prevents that and makes the handpiece stays put where you put it. Sy brand new style dental low speed handpiece complete kit has all traditional features, with other higher capabilities and less weight. A great choice at lowest possible retail pricing. Sy straight handpieces have the ergonomic triangular cross section which provides a comfortable and relaxing hold for prolonged clinical procedures. The following is other features of sy dental new low speed dental handpiece complete kit. Features: Sy-am02 -1: 1 direct drive -midwest 4 hole -max speed 22, 000 min-1 Sy-sh02 -for hp burs(2.35) -non-optic -spray nozzle Sy-ca02 -iso e-type external water spray -1: 1 direct drive -for ca burs(2.35) -latch type -18, 000 to 22, 000 r.P.M adjustable -spray nozzle.
SY E-Generator LED Dental handpiece brings light to dental offices that have been using handpieces those do not have the light on the tip. It has an internal power motor that is air-driven, which supplies LED lighting to the tip of the handpiece, so dental professionals can view the operation area without outside light. In fact this SY lighting system is even more focused and bright than most fiber optic systems. The pricing, as we are manufacture, sells even lower than most other regular high speed handpieces. It also weighs less than most others. Some other features are below for your reference. 1. Self-sufficient power system instead of external light source. Self-illuminated, natural light 2. Operating air pressure: 0.25-0.3Mpa (0.3MPa preferred) 3. Air consumption: 55L/min 4. Speed of generator: 25,000-30,000 R.P.M 5. 420,000 r.p.m for standard head 6. Ceramic Bearings: Quieter and longer life 7. Push button 8. Triple water spray 9. Sterilization by autoclave at (135) Centigrade 10. Unenclosed Cartridge 11. Noise level: Less than 68 dB 12. Chucking power: 20-45N 13. Net weight: 88g 14. Ergo Grip: Secure Grip for your confidence 15. ISO 7785-1 16. CE Mark 0197 17. One year guarantee (half year for bearings).
Product Description Summary of Color Doppler Ultrasound: YSB0201 color Doppler ultrasonic diagnostic system is composed of advanced technology of digital color Doppler and wide frequency probe, internet applications system with general measuring function, kinds of leading image process technology, which reaches to leading level in the world. It is whole-body applied digital color ultrasonic diagnosis system of Haiying ultrasonic family with clear image. Product Feature Features of Color Doppler Ultrasound: Imaging Modes 1. 3D 2. Color Doppler 3. Power Doppler 4. Pulsed Wave Doppler 5. M Mode 6. Dual Image Mode 7. Duplex, 3D & PW Doppler 8. Triplex, 3D, Color & PW Doppler
Panoramic Dental X-ray machine YSX1005 Specialty: High voltage Generator, minimum radiation for patient. Patient positioning with chin rest and reference with bit Available for adult, children, left, right or frontal partial views and upper jaw joints, lower jawbone. Technology Parameters: 1. IEC classification: Class I, type BF 2. Power supply:230V 50/60HZ 10A 3. Mains resistance: ú+ 20ohm at 20V 4. X-Ray generator: Multi-pulse at 10kHz 5. Anodic Voltage:60-86KV Constant Potential . NW:200KG GW:250KG.
Mobile High frequency C-arm X-ray Machine YSX0701 C-arm X-ray Machine Introduction: The clinical applications of this C-arm X-ray machine include orthopedics (arthroplasty, joint nailing, joint fluoroscopy, restoration and fixation for bone injury in emergency), radiology (abdominal organ angiography, gastrointestinal fluoroscopy), gynecology (uterus angiography), urology (kidney and bladder angiography), surgery (pacemaker implantation, peripheral vascular examination, etc.) and so on. Key Features of C-arm X-ray Machine: 1. Adopts the true digital high frequency host, gets the clearest and richest image with minimum dose, greatly reduces the potential harm of x-ray to clinicians and patients. 2. The unique double displays make operation intuitive, easy and reliable. 3. The vertical and horizontal movements and rotation of C-arm are all electric maneuvered. 4. Micro-computer based controller features with failure self-diagnostic function, easy maintenance. 5. Digital interfaces optionally equip with picture collection & storage workstation, directly upgrade the digital image system, to provide a short cut for your heavy file management. Upgraded Digital Image System of C-arm X-ray Machine: 1. Up to 100,000 static images stored in hard disk 2. Multi-image simultaneously display 3. Image processing functions: rotation, overturn lightness and contrast adjustment 4. Diagnostic report by laser printer Technical Data: Generator power/Frequency 3.5kw/40KHz 5kw/40KHz Radiography KV 40-110KV 40-120KV Radiography mA 30-70mA 24-70mA Fluoroscopy KV 40-110KV 40-120KV Fluoroscopy mA 0.1-5mA 0.1-5mA Pulse fluoroscopy 0.1-8mA 0.1-8mA Focus size 0.6í-1.5mm 0.3í-0.6mm Stationary anode Rotation anode Anode heat capacity 30KJ(40kHU) 150KJ(200kHU) Heat capacity of 500KJ(667kHU) 600KJ(800kHU) Collimator Iris, auto-tracking, variable visual field, double leaf Focus-to-image intensifier distance(SID) 1000mm 1000mm C-arm depth 730mm 730mm C-arm open 815mm 815mm C-arm arc glide with full balance 115íp 115íp C-arm rotation(motored) í+180íp í+180íp Upward and downward movement(motored) 400mm 400mm Forward and backward movement(motored) 200mm 200mm Horizontal swing angle í+12.5íp í+12.5íp Image intensifier 9" metal screen intensifier Camera High speed CCD camera Monitor 14" high resolution monitor Panel Two operation panels, automatic display error codes Image memory Store 8 images, freeze the last image, multilevel denoise, double displays in one screen Supply power 220V,50Hz,20A Power capacitor 4KVA . GW:300KG NW:240KG.
600mA TV Remote Control Medical Diagnostic X-Ray Radiography Machine YSX0603 1. Microcomputer control x-ray radiography assembles: optional 600mA. 2. Total 432 storage combination controlled by element such as kV mA S is applied radiography for the following filed three body position, fat middle and thin body type, automatic detect and display cod of mistake in system, send warning signal, detect accuracy and maintain. 3. X-ray tube capacity protection, anode starting-up protection and radiograph time-limit protection device semi-conduct controlled, fluoroscopy computed time device, x-ray tube over-hot protectorate provided, ensure x-ray tube run safely long time, improve accuracy of kV mA S. 4. Bulb type over remote-controlled diagnostic table and image intensifier television system are installed. They realize not only bright operation, but also supply convenience for science resonator suffer are reduced. Specifications of automatic spot-film are abundant. There are also automatic collimators for users convenience. 5. Applied in all kinds of hospital for radiography such as general body, beam filtration, and chest. Department Technology parameters High voltage generator control table and high voltage transform assemble Fluoroscopy Tube currency 0.3-5mA continuous currency Tube voltage 50-110KV continuous voltage Radiography Tube currency 32-630mA shift Tube voltage 45-125KV continuous voltage Exposure time 0.01-6.3s 23 shift Power Voltage 380Ví+10% Frequency 50Hzí+1Hz Capacity í¦50KVA Inner resistance í_0.3ª+ X-ray assembly Focus 1í-1.2í-2 double focal Rated rotate speed of anode 2800r/min Changed beam limited device Diagnosis table YS09D Automatic, adjusted field of view CS15Electro-motion diagnostic table The table body rotation "-15ípí½0ípí½+90íp" Focus to film distance 1100í½1500mm,adjustable manual 360ípfoot board The table to height 870mm Stationary grid Grid density 40L/cm Grid ration 10:01 Focusing distance 120cm Spot film device Scope of moving Longitudinal moving: 900mm; Transverse moving: í+120mm Specification of scope film Full :8"í-10", 10"í-12", 11"í-14", 14"í-14" Two: 8"í-10", 10"í-12" Three:11"í-14", 14"í-14" Four: 11"í-14", 14"í-14" Medical television system configuration 9ísx-ray image intensifier made by Toshiba, CCD camera,14ís high resolution monitor 14ísmonitor resolution Horizontal centerí¦1000 TV line Gray scale í¦10 grades Video width >12MHZ Mode of scan 625 lines, 5 field, Interlaced scanning Geometry distortion
High Frequency Mammography unit(tube import from other country) YSX0902 X-ray Generator Generator Type:High Frequency Inverter 30-60kHz Input Power: Single phase 220VAC, 50/60Hz Radiographic Ratings:Large Focal Point 22-39KV/1-600mAs Small Focal Point 22-39KV/1-100mAs Power Rating:5.5kW X-ray Tube Model:IAE X-ray Tube Anode rotation rate: 0000 rpm Focal Spot Size: Dual Focus 0.1 / 0.3mm Target Material:Molybdenum (Mo) Port Material:Beryllium (Be) Anode Heat Storage: 300KHU Anode Cooling:Air cooling Filtration: Mo(0.03mm),Al(0.5mm) Radiographic Stand C-ARM:Vertical Movement:60cm (70~130cm) Motorized Rotations Deg:í+180íp Motorized (Deg.Data Display) SID: 65cm Cassette Image Receptor Bucky Device:18í-24cm Bucky drive mechanism Grid Ratio:5:1 ,30 Line/cm Line Voltage 220V,Single phase Weight 240kg Comfortable Compression When some degree of pressure is required for radiography, it allows you to presser the appropriate pressure(up to a maximum of 20kg)and is equipped with MICOM Control's Soft-touch system which is designed to minimize the discomfort of the examine with in the pressure range. Tissue Compression: Manual and Motorized (Max 20kg) Compression Force and Thickness Data Display Micro Control's Compression Automatic Release Intelligent Automatic Exposure Control(AEC) With the Automatic Exposure Control system, it is possible to produce images with reliable intensity suitable for and film, screen, or method of radiography. Furthermore, it greatly enhances the convenience of radiography by embedding the Full-AEC function which is capable of utilizing the Auto kV Type:Solid-State Detector or PMT Detector Microprocessor Control AEC Mode:Full AEC(Auto kV) Semi AEC (KV Select) Manual (kV,mAs Select) Density Adjustment:16 density steps. GW:300kg NW:240KG.
100mA mobile x-ray machine YSX0410 GENERAL 1. Used in ward and emergency treatment room for radiography. 2. Combined x-ray generator. 3. Single focus, bridge rectification. 4. It is precise safe, reliable and flexible. 5. Remote control device(control rangeí¦5m)is used. Unit Configuration Control table, HT generator unit, Ht cable, X-ray tube unit . Main Characteristics 1. Single table and single tube. 2. Design according to the electric mechanism of middle-size machine ,The function is reasonable. 3. The high-tension system is of march-past structure. Equipped with afullwave rectification high-voltage generator and independent X-ray tube unit, with large output power and reliable and stable operation. 4. Supply voltage (V), roentgenoscopy, radiography (kv) and stepless adjust able. 5. Equipped with the manostat for filament of X-ray tube and the spacecharge compensator as to ensure the stable and accurate output. 6. Equipped with the capacity limitation and portection circuit and KV mA S interlock limitation and protection. 7. Adopt the digial circuit timer, grade according to R10 priority coefficient and can control time exactly. 8. Diagnostic table is of electric back rotation and is equipped with vibrating filter-ray device. 9. The spot film device of luminescent serene can hold the film jecket of various sizes and can make the photography of full-film and two sectional films separateiy. 10. The column has the bottom track only, which is easy while installation. MIN TECHNICAL INDEXES X-ray generator : Stationary anode, single focus and bridge silicon rectification. The x-ray generator is an oil-immersed self-cooled unit. Max rated capacity Current 15mA 30mA 60mA 100mA Voltage 90kvp 90kvp 90kvp 80kvp Time 6.3s 6.3s 4.0s 3.2s Power supply Voltage 180-240V Frequency 50Hz Capacity Not over than 7KVA Intemal resistance Not larger than 1ª+ Voltage adjustment range of x-ray tube 50-90KV Range of the time 0.08-6.3s Distance between the focus to the ground 700-1780mm X-ray tube focus transverse rotation í+60íp Specification of x-ray tuble Model XD42.9/100 fixed anode, single focus 1.8/4.3mm Transport dimension(Lí-Wí-H)(mm) 1230í-900í-2050 Weight(kg) Net:159/gross:256. Transport dimension(Lí-Wí-H)(mm) 1230í-900í-2050 Net:159KG Gross:256KG.
Max :3.5000rpm handpiece sde-h35l sp 4.0kg 20*15*12cm
Model: sunrans spa sr850 Parameter: Size: 5850íß2200íß1300mm Material: acrylic (fiberglass reinforcement) Seat for sitting: 5person Seat for lying:1 person Dry weight: 800kg Gross weight:1000kg Water capacity:1770gal/8.05cbm Voltage / frequency: 220v/240v/50-60hz Total jets:134pcs Stainless small jets (1.5"): 98pcs Stainless 3.5" hydro jets: 10pcs Stainless 5" hydro jets: 12pcs Stainless steel air jets: 14pcs Specification 3hp pump: 4sets Big 2hp pump: 3sets Circulation pump: 2sets Air blower: 2sets Heater: 2sets Control system: 3sets Ozone: 2pcs Skimmer filter(double): 2sets Skimmer filter(single): 1set Stainless small jets (1.5"): 98pcs Stainless 3.5" hydro jets: 10pcs Stainless 5" hydro jets: 12pcs 2"suctions: 10pcs Stainless steel air jets: 14pcs Bottom lights:3pcs Stainless steel waterfall: 1pcs Plastic waterfall with led lights:2pcs Led lights:46pcs Black oral pop-up speaker:4pcs Drain on the hem: 2pcs Crystal armrest:1pc Film+foam+hard paper+wooden crate+iron sheet
Dental chairs
Automatic constant temperature water system .à 1set Three way springe .................................................... 2pcs Water snction and saliva ejector ............................ 1set each Round operation light ............................................à 1set 24v low voltage x-film viewer .................................à 1set Turnable ceramic cuspidor ...................................à 1set Water purified system .............................................à 1set luxury dental stool .....à 1set Assistand computer control .................................à 1 set Options 4 holes high speed air turbine hand piece 4 holes low speed air turbine hand piece Endoscope system Ultrasonic scaler Curing light Specifications Power voltage 220v 50hz Motor volage 24v Water pressure 0.2mpa??0.4mpa Air pressure 0.5mpa-0.8mpa 1500cm*1800cm*2200cm 135kg
Product description Ipl is internationally called intense pulsed light mainly for skin rejuvenation, hair removal, vascular lesions, pigmentations, acnes treatment, pore shrinking, freckles and wrinkles reduction, which is a kink of high qualiified and perfessional machine for skin treatment. Main technical features: Stardard handpiece: collocated sr 560-1200nm and hr695-1200nm Light spot size: 8*34mm or 10*50mm Power: 10-60j Pulse duration: 1-10ms Pulse delay: 1-99ms Pulse number: 2-6pcs Discharge time: 1s/2s/3s/4s Net weight: 60kg Power supply: 110v/220v Wooden packig Net weight:50kg Dimensions40x45x150cm (attached treatmen head)
Ipl hair removal (ipl-z medical model) Product description Ipl is internationally called intense pulsed light mainly for skin rejuvenation, hair removal, vascular lesions, pigmentations, acnes treatment, pore shrinking, freckles and wrinkles reduction, which is a kink of high qualiified and perfessional machine for skin treatment. Main technical features: Stardard handpiece: collocated sr 560-1200nm and hr695-1200nm Light spot size: 8*34mm or 10*50mm Power: 10-60j Pulse duration: 1-10ms Pulse delay: 1-99ms Pulse number: 2-6pcs Discharge time: 1s/2s/3s/4s Net weight: 60kg Power supply: 110v/220v Wooden packing net weight:60kgss Dimnsions:41x58x103cm
Rf radio frequency (rf208) Product description Rf (radio frequency) is special radio frequency wavelength acted onto underskin tissue to stimulate dermis collagen and underskin elasticity fibre swift shrinking, dermis thickness and density enhanced, wrinkles reduced, skin elasticity and luster renewed, meantime, skin gradually come to white, tender and smooth, furtherly, the skin structure and function come to much younger state than before. Therefore, rf system is the best choice for face lifting, skin tightening, skin rejuvenation and deep skin wrinkles removal. Main technical features: Standard handpiece: collocated a, b c and d for face and body Power: 300v Radio frequency wavelength: 1.1hz Control model: big color touch screen. Working mode: unipolar output Dimension: Power: 220v/110v
