Chemical name: Methylene bis [(3-(2-benzotriazolyl)-2-hydroxy-5-tert-octylphenyl) CAS No.:103597-45-1 Molecular formular:C41H50N6O2 Molecular weight:658.9 Appearance: Slightly Yellow powder Melting point,degree:195-198 Assay by HPLC, %: 99 min. Ash, %: 0.1max. Volatility, %: 0.3max. Transmittance: 460nm 97%min. 500nm 98%min. UV ABSORBER HOSORB-UV360 is a highly effective ultraviolet light absorber with strong absorbance in the 300-400nm region. It provides excellent compatibility and low volatility. It is particularly suitable for processing and aging conditions where high temperature, low volatility and good compatibility are required, such as complex molding, fibers, sheets, laminated or coextruded semi-finished parts.It is suitable for PE, PP, PC, POM, PVC, PA, PE, PU, ABS resin, elastomer, adhesive etc. The synergism can be realized when it is combined to use with HALS or antioxidant.
Chemical name: 95% Benzenepropanoic acid, 3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxy-C7-9-branched and linear alkyl esters,and 5% 1-methoxy-2-propyl acetate CAS No.:127519-17-9 Molecular Formula: C27H39N3O3 Molecular Weight: 451.61 Appearance: Pale yellow liquid Purity: 93%(HPLC) min. Viscosity, 20 degree: 2600-3600mPas Density, 20 degree: 1.07g/cm�³ UV ABSORBER HOSORB-UV 384-2 is non-toxic, non-flammable, non-explosive, non-corrosive, good storage stability. It� is recommended for automotive coatings and general industrial applications i.e. coil coatings, wood coatings. It is easy incorporation into water borne systems. The performance provided by UV 384-2 can be enhanced when used in combination with a HALS stabilizer such as HLAS-292.
Chemical name: [3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-Hydroxyl phenyl]-1-oxopropyl]-hydroxypoly(oxo-1,2-ethanediyl) CAS No.:104810-47-1,104810-48-2, 25322-68-3 Appearance: Yellowish to light amber liquid Purity: 104810-47-1:36.0-38.0% 104810-48-2:50.0-52.0% 25322-68-3:12.00% Transmittance: 460nm 95.0%min 500nm 97.0%min UV 1130 is a type of benzotriazole UV absorber which is widely used in coatings. These combinations improve the durability of clear coats by inhibiting or retarding the occurrence of failures such as gloss reduction, cracking, color change, blistering and delamination. The product is easy to emulsification, especially suitable for aqueous system. It is suitable for industrial and automotive coatings. Beside, its broad UV absorption allows efficient protection of light sensitive base coats or substrates such as wood and plastics.
Chemical name: 2-(4,6-Bis-(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol CAS No.:2725-22-6 Molecular formular:C33H39N3O2 Molecular weight:509.7 Appearance: Yellowish powder Melting point,degree:89-93 Assay, %: 98min. Ash, %: 0.1max. Loss on Drying, %: 0.3max. UV ABSORBER HOSORB-UV1164 is triazine ultraviolet absorber. It has low volatility and good compatibility with polymer. It is used for POM, PA, PC, PE, PET, ABS resin etc. It is especially suitable for nylon and engineering plastics.
Chemical name: Bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-sebacate and 1-(Methyl)-8-(1,2,2,6,6-pentamethyl-4-piperidinyl)-sebacate CAS No.41556-26-7 / 82919-37-7 Molecular formular:� C30H56N2O4/ C21H39NO4 Molecular weight 508.8/ 369.5 Appearance: Clear, yellowish liquid Content of Dimer & Mono, %: 96min. Chroma: 50max. LIGHT STABILIZER LS-292 is a liquid hindered amine light stabilizer. It is applicable in a wide range of polymers and applications including polypropylene, polyethylene, polyester, acrylic, unsaturated polyester, alkyd, PVC, PVB, elastomer, adhesive, sealant and coating. It is often recommended for polyurethane because of its solubility in polyols. It can also be used in combination with UV absorbers to provide significantly enhanced performance.
Chemical name: 1,3,5-Tris(3,5-di-t-butyl-4-hydroxybenzyl) isocyanurate CAS No.:27676-62-6 Molecular formular:C48H69N3O6 Molecular weight:784 Appearance: White powder Assay,%: 98 min. Melting point,degree:218-224 Ash,%: 0.1max. Volatility,%: 0.5max. Transmittance 425nm 95% min. 500nm 97%min. ANTIOXIDANT HONOX-3114 is a high molecular weight hindered phenolic antioxidant which provides good compatibility with most substrates, high resistance to extraction, and low volatility. It is applicable to the ABS resin, polyester, polypropylene, polyethylene, polystyrene, polyurethane, Nylon, PVC, cellulose, plastics, adhesive and synthetic rubber. It is also effective in oil and paint. It can be used in combination with other additives such as costabilizers (e.g. thioethers, phosphites, phosphonites), light stabilizers and other functional stabilizers.
Chemical name: Bis(2,4-di-tert-butylphenyl) pentaerythritol diphosphite CAS No.:26741-53-7 Molecular formula:C33H50O6P2 Molecular weight:604 Appearance: White powder Assay,%:95.0 min. Melting point,degree:170.0-180.0 Volatility,%: 1.0max. Acid value (mgKOH/g), %: 1.0max. Free 2,4-di-tert-butyl-phenol, %: 1.0max. ANTIOXIDANT HONOX-626 is a highly effective phosphite antioxidant which is superior to the other phosphite antioxidants in the protection of polymers color. It provides excellent color stabilization during compounding, fabrication and end use. It is an excellent stabilizer for reducing polymer degradation during processing. It is often blended with phenolic primary antioxidants such as 1010 and 1076 to prepare composite antioxidant which improves the thermo-stability of polymer processing. It is widely used in PE, PP, PS, PA, PC, ABS, PVC and many other polymer materials.
Chemical name: PP carrier 50% Hindered Amine 2,2,6,6-tetramethyl-4-piperidinyl stearate CAS No.(HALS):167078-06-0 CAS No.(PP): 9003-07-0 Appearance: White granule powder Content, %: 47.5 52.5 Ash, %: 0.5max. Melting point, degree: 28 min. Saponification value, mgKOH/g: 128-137 Transmittance, % 425nm 90 min. 450nm 95min. LIGHT STABILIZER UV3853PP5 is s a hindered amine light stabilizer(HALS) in concentrate form which contains 50% active in PP carrier�¯�¿�½?�?� for general use in automotive and injection molding applications. It is also suitable for broad range of polymers and applications, including PP film/tape/injection molding applications, TPO, and PE film/tape/injection molding. It is also can be used for polyacetals, polyamides, styrenic polymers, and PUR. The end use of it include PP and TPO automotive parts, TPO roofing membranes, PE crates, and PP outdoor furniture.
Chemical name: N-Hexadecyl-3, 5-di-tert-butyl-4-hydroxybenzoate CAS No.: 67845-93-6 Molecular formula:C31H54O3 Molecular weight: 475 Appearance: White powder Purity (HPLC), %: 99min. Melting point,degree: 59-63 Ash, %: 0.1max. Loss on Drying, %: 0.5max. UV2908 belongs to the class of hindered hydroxybenzoate light stabilizer. It is widely used in polyolefins such as PP, PE, polycarbonate and the systems containing flame retardants and thioesters etc.� It� can be used alone or in combination with benzophenone UV stabilizer or phosphite antioxidant, showing good synergistic effect.
Chemical name: 2-(2'-Hydroxy-5'-methylphenyl)benzotriazole CAS No.:2440-22-4 Molecular formula:C13H11N3O Molecular weight: 225.3 Appearance: White to yellowish crystal powder Melting point,degree:128-132 Assay (HPLC), %: 99min. Ash, %: 0.1max. Volatility, %: 0.5max. Light transmittance, %: 440nm 94% min. 500nm 97%min. UV ABSORBER HOSORB-UVP is a benzotriazole type ultraviolet light absorber (UVA). The max absorbing wavelength range is 270-380nm. It is widely used in a variety of polymers including polypropylene polycarbonate, polyethylene, polyurethane, unsaturated resin, ABS resin, epoxy resin, PMMA, PVC, elastomer, adhesive etc. It almost does not absorb visible light, especially for colorless and transparent products.
Chemical name: 2-(2H-benzotriazol-2-yl)-6-dodecyl-4-methyl phenol CAS No.:125304-04-3 Molecular formular:C25H35N3O Molecular weight:393.6 Appearance: Light amber viscous liquid Assay, %: 95min. Ash, %: 0.1max. Loss on Drying, %: 2.0max. Transmittance: 460nm 95%min. 500nm 97%min. UV ABSORBER HOSORB-UV571 is a liquid benzotriazole type UV absorber which imparts excellent light stability to the various polymers. It can be used for thermoplastic PUR, coating, the rigid and plastic PVC, PVB, PMMA, EVA, heat curing unsaturated resin, PA, PET , PUR coil, PP fiber. It is also suitable for latice, wax, adhesive and styrene copolymer, elastomer and polyolefin.
Chemical name: 2-Hydroxy-4-n-octoxybenzophenone CAS No.:1843-05-6 Molecular formular:C21H26O3 Molecular weight:326 Appearance: Pale yellow crystalline powder Melting point,degree:47-49 Purity (HPLC), %: 99min. Ash, %: 0.1max. Loss on Drying, %: 0.5max. Transmittance 450nm 90% min. 500nm 95%min. UV ABSORBER HOSORB-531 is a light stabilizer with good performance, capable of absorbing the UV radiation of 240-340 nm wavelength with the characteristics of light color, nontoxic , good compatibility,small mobility, easy processing etc. It can protect the polymer to its maximum extent, helps to reduce the color. It can also delay the yellowing and obstacle the loss of its physical function. It is widely applied to PE,PVC,PP,PS,PC organic glass, polypropylene fiber, ethylene-vinyl acetate etc. Moreover, it has very good light-stability effect on drying phenol aldehyde, varnish of alcohol and acname, polyurethane, acrylate, expoxnamee etc.
Chemical name: 2- (2'-Hydroxy-5'-tert-octylphenyl)benzotriazole CAS No.:3147-75-9 Molecular formular:C20H25N3O Molecular weight:323 Appearance: White powder Melting point,degree:103-105 Assay (HPLC), %: 99min. Ash, %: 0.1max. Loss on drying, %: 0.3max. Transmittance 450nm 98%min. 500nm 99%min. UV ABSORBER HOSORB-329 is excellent benzotriazole ultraviolet absorbent with effective absorption of ultraviolet radiation in 270-380 nm region. It is suitable for polyester, rigid PVC, PS, PMMA, PC, ABS resin etc. It is particularly suitable for the protection of polycarbonates. In transparent products and high temperature processing of engineering plastics, its effect is excellent. It can also be used for polyolefin.
Chemical name: 2-(2'-Hydroxy-3'-tert-butyl-5'-methylphenyl)-5-chlorobenzortriazole CAS No.: 3896-11-5 Molecular formula:C17H18ClN3O Molecular weight: 315.8 Appearance: Slightly yellow powder Assay (HPLC),%: 99min. Melting point,degree:137-142 Ash, %: 0.1max. Loss on Drying, %: 0.5max. Transmittance, %: 460nm 93% min. 500nm 96%min. UV ABSORBER HOSORB-326 has a wide range of indirect food approvals in polyolefin. It has a low volatility at high temperatures and high resistance to thermal degradation and can therefore be used without significant loss or decomposition in the polyolefin compounding and molding processes. It is especially suited for polyolefins and cold cured polyesters. It protects polymers from UV radiation helping to preserve the original appearance and physical integrity, especially for polyolefins and polyester resins.
Chemical name: 2,4-di-tert-butylphenyl 3,5-di-tert-butyl-4-hydroxybenzoate CAS No.: 4221-80-1 Molecular formular:C29H42O3 Molecular weight: 438.6 Appearance: White powder Melting point,degree: 193min. Purity (GC), %: 99min. Loss on Drying, %: 0.3max. Light transmittance,%, 450nm: 98min. UV ABSORBER HOSORB UV 120 is substituted benzoate that absorbs ultraviolet radiation and through a reversible chemical rearrangement, dissipates the energy as heat. It is no color contamination, low volatility, high thermal stability, excellent resistance to washing and extraction. It exhibits a synergistic effect in combination with HALS. As light stabilizer and antioxidant, it can be used in the polymer. It is suitable for polyethylene, polypropylene, polystyrene, PU, TPU and other products, especially suitable for polypropylene films, coatings, adhesives and fiber.
Chemical name: N-(ethoxycarbonylphenyl)-N'-methyl- N'-phenyl formamidine CAS No.:57834-33-0 Molecular formular:C17H18N2O2 Molecular weight:282.3 Appearance: Slightly yellowish liquid Assay, %: 98.5min. Boiling point, degree/0.1mmHg:188-190 Water,%:1.0max. UV ABSORBER HOSORB-UV1 is a high efficient anti-ultraviolet additive. It is widely used in adhesives, polyurethane, foam and other materials. Because of its excellent absorption property, the ultraviolet radiation in 240-340nm is effectively absorbed and the ultraviolet radiation in the 300-330nm is nearly absorbed completely. Its anti-ultraviolet effect is 1.1-1.4 times as efficient as the UV absorbers of benzophenone or benzotriazole types. UV1 has good effect on the polymer system and it has good compatibility with the resin. The anti-yellowing effect is excellent. Its effect is superior to the other UV agent for PU. It is widely used in PU foaming, PU coating, PU leather, PU board and resins etc.
Chemical Name:Mixture of poly-tert-butylphenoldisulfide and stearic acid CAS No.:60303-68-6; 57-11-4 Appearance:Light yellow� to� brown� granules Sulfur content,%:26.4-28.4 Softening Point,degree:75-95 Stearic acid, %: 9.0-11.0 TB710 acts as a nitrosamine-free vulcanizing agent. It also acts as an antioxidant because of its phenolic structure. Serves as an alternative for TB7 in cases where an agent of lower softening point is required for good dispersion into a rubber compound. It offers high elastomer solubility. It forms monosulphide bridges which are more stable and have very good resistance to heat and ageing when compared with typical polysulfide bridges. It is used for polymers like rubber and in tire industry applications. It contains active sulfur and can vulcanize rubber under heating condition. The vulcanizate has the properties of non-frosting, high tensile strength and excellent heat resistance. It can be used as sulfur donor vulcanizing agent for natural rubber or synthetic rubber. It has a good tackifying effect between different polar rubber such as NR, CR, IIR, EPDM and obtains co-vulcanization effect.
Chemical Name: Diisodecyl pentaerythritol diphosphite CAS No.:26544-27-4 Molecular formula:C25H50O6P2 Molecular weight:508 Appearance: Clear liquid Specific gravity (25 degree):1.020-1.050 Refractive index (25 degree):1.4650-1.4850 PHOSPHITE ANTIOXIDANT HONOX-DPD is a specialty diphosphite which is useful as a secondary stabilizer. It is a new environmental friendly phosphite antioxidant which does not contain phenol, nonylphenol, bisphenol A, BHT and other harmful substances. Good transparency, non-toxic, pollution-free, it can effectively replace TPP, TNPP, PDOP etc. The ability of decomposing hydrogen peroxide is strong and it has better initial coloring, transparency and high temperature resistance than the ordinary phosphite antioxidants. It can be used for food contact packaging materials instead of antioxidants TPP, TNPP, PDOP, 1500 and so on. It has excellent thermal stability and color stability. It can be used in the product processing as chelating agent and stabilizer. It can effectively inhibit the aging of the products and maintain the transparency of products. It has good hydrolysis resistance stability. The synergistic effect can be achieved with the use of hindered phenolic antioxidants and UV absorbers. It can be widely used in PVC, PE, PP, PS, polyamide, polycarbonate, ABS and other polymer materials after compounding with hindered phenolic antioxidants.
Specification Actual analysisresult Appearance Clear,transparent liquid Color(PT-CO),code:10 max 5 Density at 20 (g/cm 3 ):0.897-0.902 0.9005 Purity:99.85% min 99.97% Water:0.05% max 0.005% Ethanol:0.04% mxa 0.001% Acidity( as acetic acid):0.004% max 0.0008% G.W:190kg/drum 900kg/tank
Chemical name: alpha-Alkenes(C20 C24) maleic anhydride-4-amino-2,2,6,6- tetramethylpiperidine, polymer CAS No.: 152261-33-1 Molecular formula:� (C35H66N8O2) n Molecular weight: 3000-4000 Molecular structure Specification Appearance: Yellowish solid Melting point, degree: 95-125 Loss on drying,%: 0.8 max. TGA (290 degree),%: 10 max. Application LIGHT STABILIZER LS-5050H is a high molecular weight, oligomeric hindered amine light stabilizer (HALS). It shows excellent polymer compatibility and good extraction resistance. It exhibits high compatibility in polyolefins resulting in low water take-up during production of tapes. It combines the typical benefits of a variety of high molecular weight HALS. It provides good light and thermal stability to the polymer and improved ancillary properties like low water carry-over (WCO). It offers good light stability to PE and PP tapes, PP fibers, PE films and thick articles of PP & PE. It can be used in all polyolefins. It is particularly suitable for water-cooled tape production, films containing PPA and TiO2 and agricultural applications. It can also be used in PVC, PA and TPU as well as in ABS and PET.
