Products Information Comifo designed and produce fire damper auto lines since 2006. A fire damper frame auto line, fire damper blade auto line, fastening table and other fabricating moulds and machines can achieve high production fire damper production. Comifo developed the first PLC-controlled auto line for fire damper frame. It consists of decoiler, straightening, grooving,notching, roll forming machine as well as folding machine. It is suitable for different size damper manufacture. Maximum speed is 13m/min. With this machine you can have a fully automatic damper workshop, which reduces the labor cost greatly. The Fire damper frame manufacture auto line can fabricate two kinds of frames, newly designed hand fold integrated frame and TDF corner fastened frame. Two kinds of frames to be fabricated in one machine, reaching different requirements with no doubt.
Products Information Comifo developed its own plasma cutting machines based on other famous manufactures advantages and markets requirements. There are two kinds of plasma cutting machines, duct fabricating plasma cutting machine and universal plasma cutting machine.The former can adopt further device for cutting glass wool and rubber heat-insulating material. With its cost-effective, high-precision alternatives for its configuration, you can look forward to years of trouble-free operation. Features: Rigid and Stable Framework Powerful and Accurate Drive System Safe Air Control System Easy-to Use Control System Touch Screen MITSUBISHI Servo Motor Lantek Duct Software Power Unit: THERMADYNE®
Products Information TDF Flange Forming Machine,also called Comifo TDF flange former, duct flange and flange forming machine. There are mainly two kinds of flange systems of duct connection. American standard and European standard, which is TDF flange recommended by SMACNA association and TTF/LT mate flange as well as improved GDF flange recommended by British Refrigeration Association. Comifo knows flange structure very well, and quite familiar with the standards of duct pressure test and leakage test, including SMACNA, DW144/142, GB50243-97 standards. Comifo flange forming machine can satisfy different requirements in different markets. Comifo flange machine adopts heavy duty underpan, arc welding frame, high grade motor, high precision bearing, thermal refined and grinded roll shafts. Its reliable transmission system is free of maintenance. The surface panels have been spray painted. There are mainly two kinds of flange systems of duct connection. American standard and European standard, which is TDF flange recommended by SMACNA association and TTF/LT mate flange as well as improved GDF flange recommended by British Refrigeration Association. Comifo knows flange structure very well, and quite familiar with the standards of duct pressure test and leakage test, including SMACNA, DW144/142, GB50243-97 standards. Comifo flange forming machine can satisfy different requirements in different markets. ------------------------------------------------------------------------------------------------------ Comifo TDF flange machine adopts heavy duty underpan, arc welding frame, high grade motor, high precision bearing, thermal refined and grinded roll shafts. Its reliable transmission system is free of maintenance. The surface panels have been spray painted. TDF flange is well seal and low cost, suitable for small size duct connection. Different models with different flange height of 20mm, 34mm or 40mm. One side forms TDF flange and the other forms Clip, 16 forming stations produce an integral flange while another 9 forming stations produce clip. With compact design, this machine can be taken to construction site easily. It is especially suitable for east Asia, Australia and American market. Features: One side forms TDF flange and the other forms Clip T-12-34:Flange uses approximately 42mm and clip uses approx.52mm material A small parts feeder is included for parts with a minimum width of 140mm No adjustment required when changing from 18 to 27 gauge (0.4-1.2mm) material Manufacturing speed of approximately 26FPM(8m/min) Compact design,can be taken to construction site easily
Products Information The worlds new designed duct manufacture auto line is now available since Comifo designed the Auto Line VI, which can be put in a 20GP container. Container duct auto line VI with the feature of small size, firm structure and easy for installation, it can be used in the construction site to fulfill the ideal of movable operation and processing. This auto line consists of decoiler (a special design which is easy to load coils in construction site), straightening, beading, punching, notching, shearing, patented automotion Pittsburgh lock forming (shearing, Pittsburgh lock, right angle lock in one time), duplex TDF flange forming, duplex right angle lock forming (for angle iron), and TDF folding. It can process different ducting of L, and å?£. Used with the Comifo vertical duct seaming machine and corner inserter, increases production efficiency and saves labor cost. The construction site used duct manufacture auto line VI is Comifos brave innovation and the worlds first container type auto line! It saves the manual work and transportation cost, which can move to different construction sites just by moving the container (No extra installing and testing are needed). It has gained great popularity ever since its first face show in the market in 2012. Capabilities: Alternative width for 4(1300mm) or 5(1550) material Sheet capacity: 18-27ga (0.4-1.2mm) Shearing tolerance of ±0.5mm Folding diagonal tolerance of ±0.5mm 0-54FPM (0-18m/min) feeding speed,fast acting back gauge Stations: coil-straightening-beading-punching square-notching-shearing- automation pittsburgh lock forming -duplex TDF flange forming-duplex right angle lock forming (for angle iron)- folding
(1) Automatic tube loading machine of blood collection test tube mainly places PET and glass test tube into the tube mould automatically, so as to achieve subsequent automatic production; (2) Easy to operate, low failure rate, high production efficiency; (3) Adopt human-interface control, with high positioning accuracy; (4) Load the test tubes at different heights, and the height adjustment is convenient, i.e. replacing with corresponding tube mould; (5) Cause zero harm to the test tube, automatically detect reversing tube and no tube, and it will automatically alarm when such defects are detected;
(1) Double-sided labeling machine of blood typing card adopts Siemens PLC control and Schneider servo motor drive. Featuring fast speed, high accuracy, high stability, durability, application flexibility and other advantages, it drastically improves the production efficiency and saves the cost; (2) With adoption of photoelectric detection and stepless speed regulation, it has advantages such as accurate labeling and high accuracy. Every box is labeled, and it can monitor and correct automatically if there will be no label; (3) It can be used independently, with products to be placed on feeding end or discharging end, or it can be used online.
The micro column gel filling equipment of blood typing card consists of gel shake-up part, high-precision filling part, driving part and control part; (1)Gel shake-up part: stir the gel back and forth with DC motor until the gel is mixed uniformly, with stirring speed adjustable, and anti-deposition is provided to ensure uniform filling of reagent and filling accuracy; (2)High-precision filling part: adopt imported filling technology, driven by servo system, and ensure filling accuracy, no liquid leakage and no wall-hanging residual, applicable to multi-channel filling; (3)Driven travelling part: with adoption of vibration-free servo motor, the precise screw rod and guide rail will cooperate with travelling, with high accuracy of repeated travelling positioning, and ensure the filling stud joint is aligned to the hole accurately; (4)The equipment adopts human-machine interface control and sets the required filling volume freely, which is easy and convenient to operate.
(1) Automatic tube loading machine of blood collection test tube mainly places PET and glass test tube into the tube mould automatically, so as to achieve subsequent automatic production; (2) Easy to operate, low failure rate, high production efficiency; (3) Adopt human-interface control, with high positioning accuracy; (4) Load the test tubes at different heights, and the height adjustment is convenient, i.e. replacing with corresponding tube mould; (5) Cause zero harm to the test tube, automatically detect reversing tube and no tube, and it will automatically alarm when such defects are detected;
(1) This equipment is mainly used to centrifuge after separation gel of vacuum test tube and remove the bubbles in separation gel; (2) Improve the compactness of separation gel and form bevel state, which significantly improve the overturn of separation gel during centrifugation detection as well as the applicability of separation gel; (3) High centrifugation rate, centrifugation speed and adjustable time;
The micro column gel filling equipment of blood typing card consists of gel shake-up part, high-precision filling part, driving part and control part; (1)Gel shake-up part: stir the gel back and forth with DC motor until the gel is mixed uniformly, with stirring speed adjustable, and anti-deposition is provided to ensure uniform filling of reagent and filling accuracy; (2)High-precision filling part: adopt imported filling technology, driven by servo system, and ensure filling accuracy, no liquid leakage and no wall-hanging residual, applicable to multi-channel filling; (3)Driven travelling part: with adoption of vibration-free servo motor, the precise screw rod and guide rail will cooperate with travelling, with high accuracy of repeated travelling positioning, and ensure the filling stud joint is aligned to the hole accurately; (4)The equipment adopts human-machine interface control and sets the required filling volume freely, which is easy and convenient to operate.
(1) Fill separation gel via vacuum negative pressure suction, and the gel filling volume can be adjusted via time control; (2) Adopt man-machine interface control, easy to operate, and the gel filling time and vacuum degree can be set flexibly; (3) Be equipped with automatic feeding system, with no need for manual feeding; (4) It is equipped with constant temperature control system, so as to ensure the gel filling efficiency at low temperature;
(1) with high gel filling speed, high repeated positioning accuracy, without wire drawing, bubbles or micro bubbles; (2) the equipment adopts three-axis control, and it is stable during servo operation, with high accuracy and no vibration; (3) 10-channel simultaneous gel filling (the number of gel filling channels can be customized as required by customers); (4) it is equipped with constant temperature control system, so as to ensure the gel filling efficiency at low temperature; (5) adoption of man-machine interface control makes the modification of gel filling parameters convenient and simple.
(1) with high gel filling speed, high repeated positioning accuracy, without wire drawing, bubbles or micro bubbles; (2) the equipment adopts three-axis control, and it is stable during servo operation, with high accuracy and no vibration; (3) 10-channel simultaneous gel filling (the number of gel filling channels can be customized as required by customers); (4) it is equipped with constant temperature control system, so as to ensure the gel filling efficiency at low temperature; (5) adoption of man-machine interface control makes the modification of gel filling parameters convenient and simple.
The production line of culture dish consists of automatic box placing, automatic filling, automatic capping, automatic box overlaying, automatic packing, etc.; (1) Automatic box placing: pile up the boxes in stack, then place them into the multi-channel positioning fixture, automatically place the boxes via vacuum chuck manipulator, and the placement speed is fast and operation is stable; (2) Automatic filling: adopt imported filling system, with fast filling speed, adjustable filling volume and high accuracy, the filling work of different volume can be achieved, which improves the efficiency significantly; (3) Automatic capping: after filling certain liquid into the culture dish box, start automatic capping after drying in the air, position the dried box filled with liquid precisely via the positioning device of capping, and the manipulator equipped with vacuum chuck will cap automatically, with fast capping speed, high efficiency and stable operation; (4) Automatic box overlaying: automatically convey the capped culture dish box to the station of automatic box overlaying, and the precise positioning system will overlay the boxes automatically via servo system; (5) Automatic packing: after overlaying, the automatic turnover mechanism will automatically lay flat a stack of culture dish boxes and then convey them into horizontal packaging machine, with good packaging effect, smooth product surface and clear seal-cutting edges, continuous packaging is available.
(1) Place the test tube mould into negative-pressure vacuum chamber, and form certain negative pressure inside the test tube; (2) After forming certain negative pressure, assemble the cap automatically; (3) After assembling the cap upon forming certain negative pressure inside the test tube, use the manipulator equipped with vacuum chuck to take the test tube out of the test tube mould, and then automatically install it into the foam tray; (4) The accuracy of vacuum value is high and stable, which can be set freely; (5) Adopt human-machine interface control, easy and simple to operate; (6) Both forward tray loading and oblique tray loading machines (the equipment structure of forward tray and oblique tray is different) are available as required by the user.
(1) automatic tube loading machine of blood collection test tube mainly places pet and glass test tube into the tube mould automatically, so as to achieve subsequent automatic production; (2) easy to operate, low failure rate, high production efficiency; (3) adopt human-interface control, with high positioning accuracy; (4) load the test tubes at different heights, and the height adjustment is convenient, i.E. Replacing with corresponding tube mould; (5) cause zero harm to the test tube, automatically detect reversing tube and no tube, and it will automatically alarm when such defects are detected
(1) automatically arrange the plastic caps and butyl rubber stoppers properly in proper direction with the vibrating disk, convey them to the assembly station, and the assembly cam will suck the butyl rubber stoppers through vacuuming and insert them into the plastic caps for assembly purpose; (2) feed simultaneously on two rails, making the assembly efficiency high, and the built-in detection function will ensure the qualification rate of assembled products; (3) it is equipped with automatic no-material alarm device, with speed and variable frequency adjustable; (4) customize upper-insert cap or lower-insert cap assembling machine as required by the customer
(1) mainly consisting of automatic seal-cutting and heat shrinkage, the heat shrink packaging machine adopts automatic feeding, automatic sealing control and heated air circulation, and the heat shrinking chamber is heated uniformly; the shrinking is completed by one time, with high working efficiency, which applies to those products of different heights and widths; (2) with good packaging effect, smooth product surface and clear seal-cutting edges, continuous packaging is available; (3) with human-machine interface control adopted, it is equipped with safety protection and alarm device, and easy to operate and maintain; (4) it will collect wastes separately and automatically, and drawing breakage will not occur due to excessive tensioning, thus the wastes are easy to remove.
(1) With high gel filling speed, high repeated positioning accuracy, without wire drawing, bubbles or micro bubbles; (2) The equipment adopts three-axis control, and it is stable during servo operation, with high accuracy and no vibration; (3) 10-channel simultaneous gel filling (the number of gel filling channels can be customized as required by customers); (4) It is equipped with constant temperature control system, so as to ensure the gel filling efficiency at low temperature; (5) Adoption of man-machine interface control makes the modification of gel filling parameters convenient and simple.
Safety shoes, work shoes.
