1. Frame of the cabinet is made by the steel with nine times bent for highly
strength, we've chosen specialized support frame welded together, so the
structure is firm, able to carry a heavy load. Arrangement of cables is quite
handy.
2. We apply SPCC cold rolled steel sheet or stainless steel sheet for all of our
products, 2mm thickness of front door, 1.5mm thickness of panels, 1.2-
1.5mm thickness of top cover, 2.5mm thickness of galvanized mounting plate.
3. Top cover, side panel, rear panel and bottom cover are fastened by bolts
and fasteners, it's easy for both assembly and disassembly. Thus the
installation in cabinet is much handier.
4. All of doors, panels apply PU FOAM made by full-automatic numerical
control Auto Gluer, and the door is 3 points locked(up, mid, down) which
ensure that cabinet is highly enclosed. It meets the standard of IP55.
5. Mounting plate can be adjusted back and forth for the distance of multiple
of 25mm, interior devices can be adjusted vertically and horizontally for the
distance of multiple of 25mm.
6. The door, top cover, frame are all able to earth. There are 3 fixed shelf at
the bottom for cable arrangement
7. Double door and single door are optionally available.130 degree door
swing, the height of the door above ground is 25mm.The internal surface of
the door has a frame with slots which separated by space of 25mm. In
addition, it provides horizontal steel beam for strength and be more flexible
for cable arrangement.
Brief Introduction:
Pallet racking is most extensive and simplest of all storage systems,
can use all kinds of transit equipment, 100% freely storage and get goods,simple to install and economic usage.
Features:
1) Pallets can be located, accessed and moved individually.
2) Rapid handling of almost all types of palletized goods.
3) Infinitely adjustable and offering a wide range of options and
components to accommodate specialized needs.
4) Maximizes space use in any warehouse configuration
while retaining optimum product accessibility.
5) Strength and rigidity prevents compression damage to goods.
6) Bottom level of pallets can be stored on the floor, lowering
structure costs.
All composite racking structure, fit for much higher warehouse,
storage goods by manual and storage generous quantity goods.
It can be designed into two or three layer according to actual
situation and ensure full use of the space. It is widely used
in the areas of automobiles, electronics and mechanics, etc.
Features:
Mezzanine Racking&Multi-tier racking is suit for high warehouse,
light cargo, pick by man and large storage quantity situation,
which can increase the using space.
Multi-tier racking systems are widely acceptable to automobile
and logistics industry. Its bottom level can be shelf form and above flat
form or both shelf form.
The bottom shelf is not only storage goods place but also support the
above level. Can be design many layers(usually 2-3 layers),
and with staircases handrails, elevator and lighting systems.
If the bottom beam distance can make short, the whole system
cost can low down a lot too.
1). Longer length shelving with a heavier weight loading.
2). Up to 1000kg weight loading per level.
3). A choice of 2 heights, 3 depths and 4 lengths to maximize
your storage space.
4). All shelves or beams can be adjusted freely every 50mm.
5). Shelves or panels can be made from Wire Mesh or moisture-resistant
steel board.
6). Consists of upright frames, beams and shelves.
7). Easily assembled in minutes.
8). Powder coated paint finish.
9). Extra shelves easily added.
10). Increase your storage space by adding extension units.
11). Especially suitable for those small in size but large quantity
products like retailing industry.
Designing factors:
1). How high ?(2000mm or 2500mm)
-- most popular is 2000mm.
2). How long ?(1200, 1500, 1800, 2000, or 2400)
-- most popular is 2000mm or 2400mm.
3). How many shelves ? (3, 4 or 5)
-- most popular is 4 shelves.
1) Pallets can be located, accessed and moved individually.
2) Rapid handling of almost all types of palletized goods.
3) Infinitely adjustable and offering a wide range of options and
components to accommodate specialized needs.
4) Maximizes space use in any warehouse configuration
while retaining optimum product accessibility.
5) Strength and rigidity prevents compression damage to goods.
6) Bottom level of pallets can be stored on the floor, lowering
structure costs.
Cantilever racking, composite structure, it mainly used for storage
of long figure goods, annulation’s material , plates and tube material.
It can separate for light duty,middle duty and heavy duty types
according to load capacity, while it can separate for single and
double types according to its structure.
Features:
1) The cantilever racking is suitable for storing long, circular or
irregular shape articles
2) It's suitable for the storage and reorganization of the tall and slender good
3) There are two structures_single arm and double arms.
4) It fit for small space and low warehouse
5) It is easy to fetch or place goods.
6 Mark: non-standard specification is available.
Radio shuttle racking/storage rack/warehouse storage rack/storage shelf
Radio shuttle is a racking system relies on electric Pallet
Runners automatically high density pallet storage on racking
rails it has three major parts rack, Pallet Runners and Forklift.
Radio shuttle rack is suitable for those big quantities but small
variety goods like foods, beverage, chemical and tobacco industry
especially popular in refrigeration storage house. Compared
with Drive -In Rack the radio shuttle has greatly make full use of
warehouse space, improved the work efficiency, can store high
density products and besides no need forklift entry whist store
and pick up goods.
Features:
1)High-density storage, high storage utilization
2)High efficiency, greatly reducing the waiting time
3)Job flexibility, the goods can operate FIFO model and LIFO model
4)Safety, reduce shelf impact and improve safety productivity
The rail guided vehicles compact rack system(RGVCRS) achieves
the semi-automatical compact pallet storage, by this combination
with the channel racks and rail guided vehicles. According to the
locations of in or out entrance, the RGV could be sorted two
kind of model, first in first out(FIFO) and last in first out(LIFO).
FIFO:
The pallets loading entrance in one side, and taking out in other side
Advantages:
To achieve the order of logistics access, meeting the general requirements of logistics
To realize logistics access division operation, improving on the spot management.
Disadvantages:
Must be arranged forklift channels in two side of the RSCRS,the usage rates of dynamic storage is lower than the LIFO model
LIFO:
Pallets loading in or taking out all in one side of RSCRS, and arranging one forklift channel only one side
Advantages:
To arrange one forklift channel only one side, and utilizing the storage area maximally
To fulfill the situation which undemanding the specified order of seniority.
Cantilever racking, composite structure, it mainly used for storage
of long figure goods, annulation’s material , plates and tube material.
It can separate for light duty,middle duty and heavy duty types
according to load capacity, while it can separate for single and
double types according to its structure.
Features:
1) The cantilever racking is suitable for storing long, circular or
irregular shape articles
2) It's suitable for the storage and reorganization of the tall and slender good
3) There are two structures_single arm and double arms.
4) It fit for small space and low warehouse
5) It is easy to fetch or place goods.
6 Mark: non-standard specification is available.
All composite racking or light steel structure, with high load capacity,
low cost and handy construction. According to areas and using
required the general light load capacity that it will choose composite
racking structure, while the large span and heavy duty load capacity
that it will choose composite light steel structure.
Features:
Steel structure garret is suit for high warehouse, light cargo,
pick by man and large storage quantity situation, which can increase
the using space.
Steel structure garret systems are widely acceptable to automobile
and logistics industry. Its bottom level can be shelf form and above flat
form or both shelf form.
The bottom shelf is not only storage goods place but also support the
above level.
Can be design many layers(usually 2-3 layers), and with staircases
handrails, elevator and lighting systems.
If the bottom beam distance can make short, the whole system cost
can low down a lot too.
Sample :
we will send you sample for your reference, but have to pay from your side;
we will refund the fee once you have an order with us!
Services:
Our free services include consultations and sample CAD layouts of
your proposed rack system. Don't hesitate to consider reviewing the racking
systems on site or at our headquarters. Get the racking system you need
at the best price guaranteed.
Gravity racking is derive from pallet racking, using the roller track or pallet with bottom-wheel,have the track’s gradient(approx 3°),use the goods weight, realize the cargo FIFO(first-in- first-out) principle, suitable for large quantities and the same type of goods storage operation, make use of high space. Especially for storage have warranty period and not long term backing of goods.
Features:
1)Gravity Racking is evolved by pallet shelf
2)Adopt by roller tracking or the bottom wheeled roller tray
3)Particular for a certain extent, not long backlog cargo.
4)The whole depth (roller length)not need too long.
5)In the middle can add replenishment stock loaded.
6)Not make too high (max 6 meters).
7)Load capacity is 1000kg of unit
Sample :
we will send you sample for your reference, but have to pay from your side;
we will refund the fee once you have an order with us!
Services:
Our free services include consultations and sample CAD layouts
of your proposed rack system. Don't hesitate to consider reviewing
the racking systems on site or at our headquarters. Get the racking
system you need at the best price guaranteed.
All composite racking structure, fit for much higher warehouse,
storage goods by manual and storage generous quantity goods.
It can be designed into two or three layer according to actual
situation and ensure full use of the space. It is widely used
in the areas of automobiles, electronics and mechanics, etc.
Features:
Mezzanine Racking&Multi-tier racking is suit for high warehouse,
light cargo, pick by man and large storage quantity situation,
which can increase the using space.
Multi-tier racking systems are widely acceptable to automobile
and logistics industry. Its bottom level can be shelf form and above flat
form or both shelf form.
The bottom shelf is not only storage goods place but also support the
above level. Can be design many layers(usually 2-3 layers),
and with staircases handrails, elevator and lighting systems.
If the bottom beam distance can make short, the whole system
cost can low down a lot too.
Drive in racking/storage rack/warehouse rack/warehouse storage rack
Drive in racking is designed for storage few varieties and large quantities
of similar goods with very high space utilization. The forklift truck can
drive into lane to storage goods. Goods are storage and remove from the same side,
or done from the opposite side in accordance with the “ first-in-first-out” principle.
Features:
Used in conjunction with special purpose pallet handling equipment
which may require guidance, by electronic wire or by steel rail.
Pallet support rail is punched and roll formed, so it has the
character of long inertial distance/strong load capacity.
Be used in food industry, chemical industry, clothes industry and freeze warehouse and so on.
Picking direction has single and double rows. Single one (near wall) depth is
not exceed 6 pallet depth.
Double one(middle area can pick goods) depth is better control in 12 pallet depth.
This kind system usually not exceed 10 meter high. To fasten it, not only need the strong
structure, but also need to add fix equipment. Goods is better not too big and too weight,
usually less than1500kg. The width is not excees 1.5 meter. And can work in trucks.
