The 'db251d' glass straight-line beveling machine models have been designed and built to accurately grind and polish a bevel to the face of flat glass sheets and also smooth grind (pencil edge+) the remaining glass sheet edge. The beveling, polishing and edging functions are all be processed at one time. The five grinding and smoothing spindles are accurately adjusted as a group allowing fast and accurate changes in required bevel width. The two felt polishing wheels are positioned by manual. The edging diamond wheel is adjusted manually. The whole machines bed is adjusted electrically for angle changes, via a robust gear drive system. Technical data Min. Process size:120mm*120mm Max. Arris angle: 3p-30 Max. Bevel width:30mm Glass process thickness: 4mm-19mm Process speed: 0.73-3.65m/min Spindles: 8 Power·ª16.8kw Overall dimension: 7700*1300*2520(mm) Weight: 4050kgs
Des20 double edger is applicable for grinding straight edge of flat glass of different size and thickness. It can bevel the arris of the straight edge to angle of 45íp and it also can grind the four angles. The rough grinding, fine grinding , polishing for flat edge and arris beveling can be finished at one traveling. Continuous processing can be taken for glass of the same thickness. The shininess of the glass edge surface after being processed will be almost the same as the glass flat surface. 1.2 operation condition 1.2.1 power supply: ac380v+/-10% three phase 50hz+/-2% 1.2.2 ambient temperature: 1íµ~40íµ 1.2.3 r.H:
Ds1d shape edging/beveling machine applies to grinding and polishing for shaping peripheral and beveling edges of circular, ellipse and irregular flat glass, and also applies to semi-automatic grinding for circular and elliptical glass. Using different shaping grinding wheels can obtain the half- round, flat or og edges of glass. The grinding and polishing for bevel edges can be done by the means of adjusting angles of the grinding spindle and using the bowl-shaped grinding wheel Technical data. Working dimension:100mm-2100mm Bevel angle: 0-20 Max bevel width: 40mm Table rotating speed: 0.28-3.0 rpm Spindles: 1 Power:2.85kw Overall dimension: 1300*1100*1700(mm) Weight: 880kgs
Glass table drilling machine (two drilling head) is suitable for drilling hole for different glass thickness and drilling different diameter hole by equipping different drilling bits. The machine is good for batch processing. Working efficient is high. Technical data: Distance between drilling head and supporting column:1345mm Hole diameter:í=4mm-200mm Glass process thickness:3mm-19mm Power:4kw Dimention:2500*2200*1600mm
This robust machine is designed to provide a ground and polished finish to the flat edge on flat glass up to 28mm thickness. The 9 spindle ôDE342Aö is the ideal machine for flat polishing all glass types, which can flat grind and polish flat edges together with ground and polished 45¦ arrises. Operate and maintain. Production speed is controlled via a motorvariator from 1.0 to 5.0 meters/minute. Glass thickness is selected through a toggle switch linked to a servomotor and a digital display The arris wheels automatically adjust with each thickness selected. Each spindle has an associated ammeter enabling the operator to precisely regulate the degree of contact with the glass. The entry and exit conveyors are toothed belts and the entry conveyor is equipped with a precise and easy-to-use gear reduction box that enables the operator to lower or raise the height of the inlet conveyor belt. This is especially beneficial when controlling the amount of glass removal without having to adjust each spindle individually. The main conveyor is very robust with rubber covered nylon conveyor pads. The lubrication system is manual. All motors are supplied according to clientÆs request, transformers are not used. Technical data Min. Process size:120mm*120mm Max. Arris angle:45¦ Glass process thickness:3mm-28mm Process speed:1.0-5.0m/min Spindles:9 Power18.5kw Overall dimension:6900*1200*2520(mm) Weight:2750kgs
Insulating glass machine Insulating glass machine, insulating glass machines, insulating glass machinery, insulating glass line, insulating glass equipment, insulating glass equipments Shape glass low-e insulating glass production line Automatic control for low-e glass (2-brush treatment for low-e) Automatic adjust function for pressing with hydraulic compression Titling table with hydraulic pressure Monitor using system temperature/speed/production volume Mechanical trouble cheek Whole line control function with 1 monitor Technique parameter Max. Glass size 2500f¯3500mm Min. Glass size 300f¯500mm Glass thickness 3-50mm Thickness of washing glass up to 60mm Max.In washing section 12m/min Max.In accelerating 50m/min Brush 4pair(low-e) Power voltage 3p 41.5kw(380v)/50-60hz Size of line 25000f¯2560f¯3380mm Power rate 20.6kw Size of line 25000f¯2560f¯3380mm
Functions characteristics: Low-e insulating glass production line Automatic control function for low-e glass It is transmitted by a wheel, steadily and reliably Automatic adjust function for pressing with hydraulic compression Tilting table with hydraulic pressure Monitor using system temperature/speed/production volume Mechanical trouble cheek Whole line control function with 1monitor Technique parameter: Max .Glass size 1800íß2500mm Min .Glass size 300íß500mm Glass thickness 3-50mm Thickness of washing glass up to 50mm Max.In washing section 12m/min Max.In accelerating 50m/min Brush 3pair(low-e) Power voltage 28kw(380v)/50-60hz Size of line 15600íß2350íß3000mm Power rate 20kw 5000kg Size of line 15600íß2350íß3000mm
Functions characteristics: The production line is composed of glass transporter, automatic glass scavenging dehydrator, glass inspection transporter, automatic aluminum frame locating machine, glass reversible transporter, binding machine butyl extruder machine, bicomponent rubber beating machine molecular sieve bottler, and rotaiy rubber-spreading machine. The production line is composed of flat press mode which is quite popular in the world production of hollow glass. The automatic flat press machine has a unique designation of two boxes to enable the two pieces of glass binding into on one time. It is also suitable for production hollow glass of different size, shaped hollow glass and glass curtain walls. Technique parameter: Max .Glass size 1600íß2000mm Min .Glass size 300íß500mm Glass thickness 3-25mm Thickness of washing glass up to 50mm Working speed 12m/min Brush 2pair(low-e) Power voltage 22kw(380v)/50-60hz Size of line 12000 multiply1250 multiply2600mm Power rate 11kw Size of line 12000 multiply1250 multiply2600mm
Functions and characteristics: This line is specially designed for producing the slot-alum insulating glass .It includes vertical washing drying machine roll-pressing machine and can accomplish the double glazingí»s washing drying auto-assembling, auto-roll-pressing and smooth shifting out. It features high efficiency, low power, and energy-saving, less space using and easy operation. Technique parameter: Max .Glass size 1600íß1800mm Min .Glass size 300íß500mm Thickness of washing glass up to 50mm Working speed 2-10m/min Power voltage 380vac Size of line 11500íß1250íß2600mm Power rate 11kw Size of line 11500íß1250íß2600mm
Functions characteristics: Plc man-machine interface display screen switches and pilot light are all imported. Automatic starting, suspending and stopping. Washing-conveying mechanism is upward. Drying conveys by wheel. Inspecting glass cleaness. Washing-conveying starts together by the foot control and hand control. Automatic glass and alum-frame locate, as well as the assembling. Automatic implemention of the roll-pressing procedure. Glass-rotation can be made automatically or by hand. Auto-heating for the washing water according to the season changing. Supervision by man-machine interface display screen. Technique parameter: Max .Glass size 1800íß2500mm Min .Glass size 300íß500mm Glass thickness 3-50mm Thickness of washing glass up to 50mm Working speed 12m/min Brush 3pair(low-e) Power voltage 28kw(380v)/50-60hz Size of line 15000íß2350íß3000mm Power rate 12.8kw Size of line 15000íß2350íß3000mm
We provide two series of laminated machine. Lm-af-t is a tilting design and lm-af-c a chamber design. Lm-af series Characteristic 1. Laminated glass is made in this machine. No autoclave or roller press is required. The laminated glass made from this machine is finished product. 2. Vacuum rubber ring and vacuum rubber bag are not required. For details, please refer to the technical description of each model. Type of glass to be made This machine is used to make different type of laminated glass such as, 1. Laminated glass for decorative and architectural purposes. 2. Polymer dispersed liquid crystal (pdlc) panel which is transparent allowing light passing through when voltage applied and opaque when voltage shut off. Eva interlayer film The laminated glass made out of this machine requires no pvb. Instead, a special interlayer film eva is used to bind the glass. Not like pvb, eva film is easy to be handled such that it requires no control in temperature and humidity. Hence, no assembly room is needed and thus, air-conditioner and de-humidifier are not required. The laminated glass can be made from one piece of eva film such that excellent anti-penetration strength is obtained without any glass fragmentation in case the laminated glass is broken accidentally. Pallet or plywood case
Glass Straight Line Edging Machine is suitable for grinding flat edge with arrises of different thickness and size glass. Equip with nine bowl or cup shape special purpose wheels, five for flat edge, and four for arrises. The grinding and polishing of flat edge with arrises are finished at one processing Wooden case or Plywood case
Lass max.Loading area :3660x2440mm Glass min. Dimention :300x200mm Glass thickness:í²4í¬19mm Container 40fc
Automatic insulating glass produce line Main functions: 1. This machine has the self- diagnosis function, which is easy for check the error. 2. The machine has automatic and the manual two operating modes. They are more convenient and succinct; 3. It adopts the multistage frequency conversion control and multi-speed revolution optimization function and it can realize each kind of size glass movement automatically. 4. Every transportation partial adopts stops the cushion function, which can avoid phenomenon which appears the glass and the equipment localization occurs dashes. And effectively reduces the glass to transport a turn of attrition. 5. Adopt the electricity saving pattern, when the conveyer puts in the glass which can automatic start. It doesnf+t have the glass time delay automatic shut-off, saves the power consumption. 6. Air blowers adopts graduation time delay starter, effectively avoids the initial firing current oversized phenomenon. 7. Cleaning dryer and the water tank was made by stainless steel processing manufacture, transmits the roller for to bear the acid and alkali rubber roller, according to the glass thickness transmission roller spacing may the automatic control. 8. Inspections transmissions and the aluminum frame assembly machine adopt the double fast transmission, highly effective energy conservation May realize automatic processing to the ultra long glass, three glass and the size piece glass. (This item for specially request) 9. The press panel board of panel pressure board adopts to imported osculum, the press system and panel press system are controlled by the Servo motor system·+screw convey·¼, which guarantee the two pieces glass press together safely and steadily and the processing accuracy. Dimension: 15900*2100*2960mm Weight·ª4000kg
1- Automatic Loading & Unloading Machine (SKL-2542P) 2- Glass Washing and Drying Machine 3- Transition Conveying Machine 4- Automatic Pre-position Table 5- Assembling Table 6- Automatic Suction Transfering Device 7- Motorized PVB Film Unwinding Machine 8- Transition Conveying Machine 9- Pre-laminating and Press Section 10- Transition Conveying Machine 11- Hydraulic Pressure Tilting Table For Glass Loading & Unloading SKL-2542T 12-Autoclave: 2800*6000mm
1- Speed: 140m/min 2- Thickness: 4-12mm 3- Min size: 750 350 mm 4- Max size: 3700x2500mm 5- Chamfer width: 0.5 mm 6- Motors groups: 3 pairs (6 chamfer 7- Power: 15KW, 380V/50Hz 8- Air pressure: 0.6-0.8MPa 9- Size: 7600 4800 2100m Linear  guide: Taiwan silver Motor driver: Schneider Servo driver: Schneider PLC: Schneider Intermediate relay: Schneider
1. Processing speed: 0.7~3.5m/min 2. Glass processing thickness: 3~12mm 3. Total power: 24kw 4. Min. processing size of glass: 80 x 80mm 5. Occupation area: (L x W x H) 6800 x 1200 x 2500 6. Gross weight: 4000.00 kgs 7. Max. size of bevel edge: 40mm 8. Beve angle: 0-25 9. WIth PLC touch screen 10. HS CODE: HS CODE: 8464201000
1- One max. width 4000mm Double Edging Machine (1) Max.Processing Width: W.4000 (2) Min.Processing Size: 300x300mm (3) Thickness: 4-25mm (4) Speed: 0.4-4.8m/1min (5) Total 22 motors, 11 motors for each side. 2- One Automatic Transit Table (1) L-shape Automatic Transit Table (2) Max. Transfer Size: 4000 x 2500mm (3) Min. Transfer Size: 380x380mm (4) Transmission Speed: 0.4-4.8m/1min 3- One width 2440mm Double Edging Machine (1) Max.Processing Width: W.2440mm (2) Min.Processing Size: 250x250mm (3) Thickness: 4-25mm (4) Speed: 0.4-4.8m/1min (5) Total 22 motors, 11 motors for each side. (6) With corner edging function for the last spindle. Note: Processing by whole line, max. processing size is 4000x2500mm, min. size is 380x380mm (total power: 110kw)
1- Processing speed: 1~5m/min 2- Min. processing size of glass: 60 x 60mm 3- Glass processing thickness: 3~25mm 4- Max. size of hemline grinding: 4mm 5- Processing degree: 0-45 degree 6- Total power: 20kw 7- Weight: 2800.00 kgs 8- Occupation area: (L x W x H) 6800 x 1200 x 2450 mm
Jacket Glass reactor principle is two parts, in the inner glass,the mix bar is continous stirring to make mixing or evaporating reaction under negative vacuum pressue. The stirring is under speed controlling. The jacketed glass could supply heating or cooling material to help the chemical reaction. Recently glass reactors has been widely used in chemical, biological and pharmaceutical experiment and prodcuction. Main Features of the Jacket Glass Reactor 1, The use of borosilicate glass (GG17 material), has excellent physical and chemical properties. 2, Speed mixing, smooth and reliable operation, torque, no spark. 3, PTFE components mechanical seal, proprietary technology, can maintain the market similar products, high vacuum (-0.095mpa or so), the leading domestic. 4, PTEE discharge valve, kettle body and lid are also customized according to customer requirements. 5, The reaction of the sandwich heating (cooling) solution can be completely removed after the reaction, no solution. 6, Regardless of refrigeration or heating, can be produced according to customer requirements matching products. 7, The overall structure of science, novel, practical, beautiful, leading domestic.
