Ring joint gasket Got-450 ring joint gasket chooses solid metal with kinds of materials, and is mechanically cut and processed into metal sealing gaskets with kinds of forms by high precision nc lathe. It is suitable for the sealing part of pressure container, valve, and cylinder head with high temperature, high pressure, and strong corrosion. General characteristic is installation area small and preload pressure high. Metal flat gasket Metal elliptic gasket Metal aniseed gasket Rx type metal gasket Bx type metal gasket Special-shaped metal gasket
Reinforced (non-)asbestos beater sheet Got-633 is made of 633-1 non-asbestos beater sheet inner lined with metal truss plate (generally the carbon steel with 0.2~0.25mm thickness). It is extensively applied in manufacturing various automobile and motor gaskets. It is an ideal material that will substitute the traditional asbestos gaskets. The product has excellent performance in self expansion, high resilience and long lifespan, etc. Mainly applied in automobile farming machine, motorcycle and engineering etc., it is also can be used in high strength gaskets and cylinder gaskets etc. Product structure: Got-633 truss plate reinforced asbestos beater sheet If stored for a long time, the asbestos will have certain corrosion to the inner lined metal.
Rubber wheel chock Rubber wheel chock is used for wedging and blocking tires to restrict movement of the wheel while vehicle is being loaded or unloaded at the dock, also stopping the car for repairing in a slope. Material: nr, sbr, epdm or reclaimed rubber.
Ptfe gasket 1) sealing gasket for pumps and pipes, etc. 2) all sizes are available 3) new molds can be made according to customers' requirements 4) high chemical properties 5) wide temperature range from -180ípc to +260ípc 6) has the lowest coefficient of friction of all the known solid materials 7) not aging 8) nonstick All sizes are available on costomers' request
Rubber pedal Rubber pedal is used for for different vehicles and trucks, prevent from slipping. We supply pads with various materials and styles. High/low temperature-resistant, wearing-resistant, aging-resistant, oil-resistant. Material: epdm, nbr, nr, cr, sbr, silicon
Ptfe gasket 1) sealing gasket for pumps and pipes, etc. 2) all sizes are available 3) new molds can be made according to customers' requirements 4) high chemical properties 5) wide temperature range from -180c to +260c 6) has the lowest coefficient of friction of all the known solid materials 7) not aging 8) nonstick All sizes are available on costomers' request
Molded rubber product 1) we could effectively guarantee the stable quality, and the credibility; 2) rubber material could be epdm, nbr, sbr, cr, nr, rr, silicone and so on. 3) we can produce according to your drawing and samples. 4) different colour and size are available 5) we have the capacity to run parts from 1 gram to 8 kilograms. 6) small orders accepted 7) competitive price 8) prompt delivery time
Extruded rubber product A) we can extrude solid rubber or sponge rubber according to your drawing or samples. B) main rubber material could be silicone, epdm, nbr and so on. C) free mold cost for our customers. D) different colour are available E) prompt delivery time
Material: Spairal wound gasket is formed of V-shaped of W-shape stainless steel stripe and soft nonmetallic packing or the material of flexible graphite asbestos, nonasbestos, PTFE etc by means of piled. The(inner/outer) ring: Carbo steel, SS304, SS316, Monel Use temperature: -200-870ípC Use pressure: 30Mpa Application range: The static sealing element of pipe, valve, pump, thermal exchange, condensing motorcycle, auto vent-pipe, tower, plain hole and hole of flange, etc. Supplying specification: DN10-300-0mm
Product Information: Description: GOT Kammprofile gasket , generally processed to be concentric groove in the two faces of the stainless steel flat gasket by precise lathes. According to the different medium, w can choose flexible graphite, PTFE, non-asbestos, or other soft metal, to sick to the two faces of the gasket. It can directly be used without sealing layer, and the effect is good. But under the high pressure occasion, it will be easy to do damage to the surface of the flange. 410 basic type Kammprofile gasket 410L Kammprofile gasket with outer ring (integral type) 410LM Kammprofile gasket with outer ring (split type) Model 410LM split type Metal toothed gasket with outer ring, can choose richer metal, e.g. carbon steel, as the outer ring, and the outer ring thickness can be 1.5mm, more flexible and economic than the integral type 410L, and the lining metal can be repeatedly used. Product application: GOT toothed combination gasket is the first choice gasket under relatively low preload power, the soft surface of the sealing layer can avoid the direct touch between metal and metal, which is combined reliably and compactly, to protect the metal flange from damaged, even under extremely high load. The toothed combination gasket is especially suitable for the flange connection in thermal exchanger, container, and reaction vessel under high temperature, high pressure, and the working condition altering occasions. It is an ideal substitution for traditional metal jacketed gasket. Operating pressure range: 6.4~25Mpa Selectable material: Metal material German trademark Hardness Temperature íµ Density g/cm3 Thichness mm Carbon Steel 1.1003/1.0038 90~120 -60~500 7.85 2 3 4 SS304, SS304L 1.4301/1.4306 130~180 -250~550 7.9 SS316, SS316L 1.4401/1.4404 130~180 -250~550 7.9 Other metal on require Overlaying material: Flexible graphite, asbestos plate, non-asbestos plate; PTFE, mica plate, lead, etc. Generally the thickness of the dual overlaying is 0.5mm
Product Information: Description: GOT - 420 Corrugated Metal Gasket is processed by metal flat ring into concentric waveform coil by die-pressing, rolling, or turning techniques, with the surface sticking non-metal as expanded graphite or PTFE. Comparing with 410 Kammprofile gasket , the lining metal can choose multiple thickness, as 3mm, 2mm, 1mm, 0.5mm, etc. and the metal wave distance can be different according to the width difference of the sealing surface, generally be 3mm, 4mm, 6mm Selectable material: Metal material German trademark Hardness HB Temperature íµ Density g/cm3 Thickness mm Carbon Steel 1.1003/1.0038 90~120 -60~500 7.85 0.5mm; 1mm, 2mm; 3mm, 4mm SS304, SS304L 1.4301/1.4306 130~180 -250~550 7.9 SS316, SS316L 1.4401/1.4404 130~180 -250~550 7.9 Other metal on require Overlaying material: Flexible graphite, PTFE, asbestos plate, non-asbestos plate; Generally the thickness of the dual overlaying is 0.5 mm, 1.0mm, 1 .5mm
Product Information: Description: GOT Kammprofile gasket , generally processed to be concentric groove in the two faces of the stainless steel flat gasket by precise lathes. According to the different medium, w can choose flexible graphite, PTFE, non-asbestos, or other soft metal, to sick to the two faces of the gasket. It can directly be used without sealing layer, and the effect is good. But under the high pressure occasion, it will be easy to do damage to the surface of the flange. 410 basic type Kammprofile gasket 410L Kammprofile gasket with outer ring (integral type) 410LM Kammprofile gasket with outer ring (split type) Model 410LM split type Metal toothed gasket with outer ring, can choose richer metal, e.g. carbon steel, as the outer ring, and the outer ring thickness can be 1.5mm, more flexible and economic than the integral type 410L, and the lining metal can be repeatedly used. Product application: GOT toothed combination gasket is the first choice gasket under relatively low preload power, the soft surface of the sealing layer can avoid the direct touch between metal and metal, which is combined reliably and compactly, to protect the metal flange from damaged, even under extremely high load. The toothed combination gasket is especially suitable for the flange connection in thermal exchanger, container, and reaction vessel under high temperature, high pressure, and the working condition altering occasions. It is an ideal substitution for traditional metal jacketed gasket. Operating pressure range: 6.4~25Mpa Selectable material: Metal material German trademark Hardness Temperature íµ Density g/cm3 Thichness mm Carbon Steel 1.1003/1.0038 90~120 -60~500 7.85 2 3 4 SS304, SS304L 1.4301/1.4306 130~180 -250~550 7.9 SS316, SS316L 1.4401/1.4404 130~180 -250~550 7.9 Other metal on require Overlaying material: Flexible graphite, asbestos plate, non-asbestos plate; PTFE, mica plate, lead, etc. Generally the thickness of the dual overlaying is 0.5mm
Material: can produce in various kinds of material, such as EPDM,VITON,NBR and so on. Any sizes.
Kammprofile gasket Got kammprofile gasket , generally processed to be concentric groove in the two faces of the stainless steel flat gasket by precise lathes. According to the different medium, w can choose flexible graphite, ptfe, non-asbestos, or other soft metal, to sick to the two faces of the gasket. It can directly be used without sealing layer, and the effect is good. But under the high pressure occasion, it will be easy to do damage to the surface of the flange. 410 basic type kammprofile gasket 410l kammprofile gasket with outer ring (integral type) 410lm kammprofile gasket with outer ring (split type) Model 410lm split type metal toothed gasket with outer ring, can choose richer metal, e.G. Carbon steel, as the outer ring, and the outer ring thickness can be 1.5mm, more flexible and economic than the integral type 410l, and the lining metal can be repeatedly used. Product application: Got toothed combination gasket is the first choice gasket under relatively low preload power, the soft surface of the sealing layer can avoid the direct touch between metal and metal, which is combined reliably and compactly, to protect the metal flange from damaged, even under extremely high load. The toothed combination gasket is especially suitable for the flange connection in thermal exchanger, container, and reaction vessel under high temperature, high pressure, and the working condition altering occasions. It is an ideal substitution for traditional metal jacketed gasket. Operating pressure range: 6.4~25mpa
Reinforced graphite gasket
Double jacketed gasket Product application: Got is particularly suitable for heat exchanger, gas pipeline, cast iron flange, cylinder head and boiler, and other containers. Generally, when installed, it can press the initial thickness of the gasket to get a 30% deformation, thus can effectively seal the unevenness and small defects of the flange. Through choosing different metal and different fillers, it can suit to different mediums.
Tpe gasket 1) Made of santoprene 241-87 2) Used for water seal
Sealing gasket Material:spairal wound gasket is formed of v-shaped of w-shape stainless steel stripe and soft nonmetallic packing or the material of flexible graphite asbestos, nonasbestos, ptfe etc by means of piled.The(inner/outer) ring:carbo steel, ss304, ss316, moneluse temperature:-200-870ípc use pressure:30mpaapplication range:the static sealing element of pipe, valve, pump, thermal exchange, condensing motorcycle, auto vent-pipe, tower, plain hole and hole of flange, etcsupplying specification:dn10-300-0mm According to the requirements of packaging
Spiral wound gasket 1. Structure The wound style gasket consists of "v-shape"(or"w-shape")metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape, both its start point and end point are tack welded. 2.Performance and features 1. Wide range of applicable working condition, high temperature and high pressure resistance, applicable to super low temperature and vacuum condition.Chemical resistant gasket is available under various medium, through change of composition of gasket. 2.Strong stress compensation, stable and reliable sealing performance even under frequent pressure fluctuation condition. 3.Perfect sealing performance. 4.Normal requirement of flange surface finishing which contact with gasket. 5.Easy installation and low pre-tightening stress of gasket. 3.Kinds of gasket 1.A.Wound style gasket consists of four type:basic type, with inner ring, with outer ring, and with inner and outer rings. B.Heat exchanger wound style gasket:basic type and with inner and outer rings. 2. Normally matrial used: A.Steel tape:08f, 0cr18ni9(304), 0cr18ni9ti, 1cr18ni9ti(321), 0cr17ni12, m02(316), 00cr17ni14m02(316l). B.(cold roll)steel plate for inner and outer ring:outer ring:mild steel, 0cr13 and 0cr18ni9 Inner ring:same as steel tape, special order is a available through negotiation. C.Nonmetal tape:flexible graphite, special made asbestos, teflon and non-asbestos paper. 4.Scope of application 1. Working temperature:-196íµ -700íµ(not higher than 600íµ in oxidic medium) 2.Working pressure:ín25mpa 3.Gasket coefficient:m=2.5-4 4.Min.Pre-tightening specific pressure:y-68mpa 5.Max.Machinable size:-2800mm
Die formed graphite ring Die formed graphite packing ring is made of pure flexible graphite , or graphite with nikle/ss316/brass wire reinforced. Performance and features Perfect self lubricant performance. High elasticity coefficiency. Scope of application Working temperature:~200~400íµ(200~800íµ under non-oxidation atmosphere) Working pressure:ín35mpa Density:1.4 ~ 1.6 g/cm3 Max.Machinable size:5~850mm