Name: water-based varnish (self-adhesive) Model: H-5803C Use: for in-line printing , wet to wet printing , self-adhesive , for noodles package . Description: H-5803C is a plus by a special acrylic polymer emulsion with functional additives varnish, It has strong adhesion for the paper after it was hot of the Ultrasonic heating. This varnish has excellent gloss, good gloss and color retention, dry fast, good printability. The wet-wet and wet-dry printing has good wetting leveling, strong anti-alcohol ,printing machine is easy to clean. Dedicated to the noodles package(such as Master), which need ultrasonic to glue Automatic .This varnish is used off-line coating, can also be used for inline coating. Appearance: milky white liquid, Solid content 40%, Viscosity (seconds): 18 ~ 20, (3 cup, 25 ), Gloss: 55 5 Notes: 1, It based on conditions of use plus appropriate diluent (water) or alcohol and water (1-5:1) mixture dilution. In order to achieve gloss and abrasion resistance requirements of the situation according to the paper, roll coated with light plus 5 to about 15% thinner, with inline coating liquid, the use of high viscosity coating process should be adjusted to increase the amount of diluent the appropriate viscosity. 2, Varnish on paper should meet the principle, if excessive dilution will affect gloss, abrasion resistance and leveling; the contrary will result in dilution of inadequate leveling varnish is not good, the drying rate is too slow . 3, depending on fuel quality and gloss paper requirements, are generally on-line coating of :2-5 g / m, offline coating 3-7g / m. 4, drying method: to use infrared drying, hot air or heat pipe heating and drying. Drying equipment operation during the first table shows the temperature not lower than 70 . 5, Take 12 hours after polishing of the varnish in order to achieve optimal performance. 6,It can use water to clean equipment, the dry varnish can used Isopropyl alcohol or alcohol to clean. 7, the product of alkali-soluble varnish, when veneer to the cartons (laminating), try to choose a neutral or weakly alkaline (PH 10) adhesives, when used starch caustic soda glue (yellow glue) fluid, Please be strictly controlled to avoid excess glue with a glue penetrate varnished surface caused by dissolution of the coating adhesive. Package: 25KG/50KG/120KG plastic containers, sealed in a cool place, the shelf life is one year.
Name: water-based varnish (in-line) Model: H-5303C Use :for in-line printing , wet to wet printing , matt ,for paper package . Description: H-5303C is an environmentally friendly oil dumb fast printing, excellent wear resistance, good leveling characteristics. Fast drying and good printability. Wet ink on good wetting leveling, strong resistance to alcohol, printing machine is easy to clean. Used for frozen packaging, bottled instant noodles, electrical appliances, wine packaging and other high-end printing cigarette packaging. This varnish coating for offset printing blanket, inline coating, glazing, and off-line flexo coating. Appearance: milky white liquid, Solid content 40%, Viscosity (seconds): 18 ~ 20, (Viscosity Cups 3 , 25¡æ) Gloss: 6 ~10 Notes: 1, It based on conditions of use plus appropriate diluent (water) or alcohol and water (1-5:1) mixture dilution. In order to achieve gloss and abrasion resistance requirements of the situation according to the paper, roll coated with light plus 5 to about 15% thinner, with inline coating liquid, the use of high viscosity coating process should be adjusted to increase the amount of diluent the appropriate viscosity. 2, Varnish on paper should meet the principle, if excessive dilution will affect gloss, abrasion resistance and leveling; the contrary will result in dilution of inadequate leveling varnish is not good, the drying rate is too slow . 3, depending on fuel quality and gloss paper requirements, are generally on-line coating of :2-5 g / m, offline coating 3-7g / m. 4, drying method: to use infrared drying, hot air or heat pipe heating and drying. Drying equipment operation during the first table shows the temperature not lower than 70. 5, Take 12 hours after polishing of the varnish in order to achieve optimal performance. 6,It can use water to clean equipment, the dry varnish can used Isopropyl alcohol or alcohol to clean. 7, the product of alkali-soluble varnish, when veneer to the cartons (laminating), try to choose a neutral or weakly alkaline (PH 10) adhesives, when used starch caustic soda glue (yellow glue) fluid, Please be strictly controlled to avoid excess glue with a glue penetrate varnished surface caused by dissolution of the coating adhesive. 25kg/50kg/120kg plastic containers.
Name: Water-based Varnish (high viscosity) Model: H-5312 Use : high gloss ,high viscosity ,for paper package printing Description: H-5312 is an environmentally friendly water-based varnish, excellent wear resistance, high gloss, gloss retention, dry fast, good printability. A variety of ink has good wetting leveling, printing machine is easy to clean s. It is meet the national and EU environmental standards, through the EU ROHS test, compliance with international environmental requirements. Scratch resistance is strong, mainly used for dusting and more printing, high wear resistance. Appearance: milky white liquid, Solid content: 461%, Viscosity (Viscosity Cups 3 , 25 seconds): 18 ~ 20, Gloss: 4 ~ 7 Notes: 1, It based on conditions of use plus appropriate diluent (water) or alcohol and water (1-5:1) mixture dilution. In order to achieve gloss and abrasion resistance requirements of the situation according to the paper, roll coated with light plus 5 to about 15% thinner, with inline coating liquid, the use of high viscosity coating process should be adjusted to increase the amount of diluent the appropriate viscosity. 2, Varnish on paper should meet the principle, if excessive dilution will affect gloss, abrasion resistance and leveling; the contrary will result in dilution of inadequate leveling varnish is not good, the drying rate is too slow . 3, depending on fuel quality and gloss paper requirements, are generally on-line coating of :2-5 g / m, offline coating 3-7g / m. 4, drying method: to use infrared drying, hot air or heat pipe heating and drying. Drying equipment operation during the first table shows the temperature not lower than 70 . 5, Take 12 hours after polishing of the varnish in order to achieve optimal performance. 6,It can use water to clean equipment, the dry varnish can used Isopropyl alcohol or alcohol to clean. 7, the product of alkali-soluble varnish, when veneer to the cartons (laminating), try to choose a neutral or weakly alkaline (PH 10) adhesives, when used starch caustic soda glue (yellow glue) fluid, Please be strictly controlled to avoid excess glue with a glue penetrate varnished surface caused by dissolution of the coating adhesive. Package: 25KG/50KG/120KG plastic containers, sealed in a cool place, the shelf life is one year.
600*600mm.
Material: ceramic Tiles Water absorption rate: 10%-12% Usage: Interior Tiles Place of Origin: Guangdong China (Mainland). Size: 300x450mm Packing details: with wooden pallet, 12 PCS/CTN, 1.62 SQM/, CTN, 28 kg/ CTN.
Length and width: -0.02%~0 Thickness:10.1mm,Deviation:-0.67%~+1.01% Straightness of sides:-0.02%~+0.02%. 120x80x154cm or 110x110*150cm.
Colour gravel is the best seller in our company, it is usually used as decoration in aquarium, house and garden. Colour gravel is not toxic and the beautiful colour will not fade easily, thus it keeps a good environment for fish. 5kg/bag;20kg/bag;25kg/bag or others.
Seat/Back foam: soft and comfortable moulded foam with strong restoring function. Seat/Back Shells: High impact Polypropylene(PP). Armrest: Premium wood armrest. Painted or PP. Stand: Mould-pressed with high quality steel plate. Fabric: 1. Premium specific cloth. 2. Genuine leather. 3. Artificial leather Seat reposition: Noise free, Spring driven Coating: Coated with static powder after antirust treatment. Knockdown packing into carton.
Seat/Back foam: soft and comfortable moulded foam with strong restoring function. Seat/Back board: Premium high-density hard plywood. Armrest: Premium wood armrest.Painted or PP. Stand:Mould-pressed with high quality steel plate. Fabric: 1. Premium specific cloth. 2. Genuine leather. 3. Artificial leather Seat reposition: Noise free, Spring driven Coating: Coated with static powder after antirust treatment. Knockdown packing into carton.
Glass Mosaic 1. Brand Name: Missoni 2. Place of Origin: Guangdong, China (Mainland) 3. Thickness: 6mm, the glass mosaic chip normal size: 12x12mm 4. Available in various colors, decorative pattern and size, popular designs & competitive price. Features: 1). Materials: Glass 2) Galss Mosaic in Vairious Color, Sizes and Pattern. 3) Easy to clean high and low temperture resistant. Easy to install with standard tool and material. Anti-dust, washable; acid-proof; alkali-resistant and durable. Standard Export Carton with wooden pallet.
Glass Mosaic 1. Brand Name: Missoni 2. Place of Origin: Guangdong, China (Mainland) 3. Thickness: 6mm, the glass mosaic chip normal size: 12x12mm. Standard Export Carton with wooden pallet.
1.Materials: Glazed Ceramic Border Tile 2.Size: 25*8cm, 30*7cm,30*8cm,35*7cm,35*8cmEtc 3.Package:4opcs/ctn,48ctns/pallet. 4.Surface: polished golden and .without golden 5.MOQ: 1000pcs 6 own factory from Foshan.
Brushed ceiling series is a stykish, high-grade decorative ceilings, beautiful color, plate surface through a rigorous process from refining processes.Plate surface with a special process.Color will never fade board, show remarkable taste, we are committed t creating for you a comfortable, tasteful, comfortable living space.
Photoluminescent tile. Carton.
Size: 300*300 mm is available; Thickness: 7mm Finished: polished, super glossy, nano technology Color: gray, beige, milk white , coffee, metal color, rust red Special feature: low water absorption, green and environmentalism, durable , skip resistance, anti pollution, frost resistance. Water absorption: less than 0.5%. Packing:300*300mm 14pcs/boxes, 1.26sqm/boxes, 21kg/boxes.
Size: 300*300 mm is available; Thickness: 7mm Finished: polished, super glossy, nano technology Color: gray, beige, milk white , coffee, metal color, rust red Special feature: low water absorption, green and environmentalism, durable , skip resistance, anti pollution, frost resistance. Water absorption: less than 0.5%. Packing:300*300mm 14pcs/boxes, 1.26sqm/boxes, 21kg/boxes.
Size: 300*300 mm is available; Thickness: 7mm Finished: polished, super glossy, nano technology Color: gray, beige, milk white , coffee, metal color, rust red Special feature: low water absorption, green and environmentalism, durable , skip resistance, anti pollution, frost resistance. Water absorption: less than 0.5%. Packing:300*300mm 14pcs/boxes, 1.26sqm/boxes, 21kg/boxes.
Size: 300*300 mm is available; Thickness: 7mm Finished: polished, super glossy, nano technology Color: gray, beige, milk white , coffee, metal color, rust red Special feature: low water absorption, green and environmentalism, durable , skip resistance, anti pollution, frost resistance. Water absorption: less than 0.5%. Packing:300*300mm 14pcs/boxes, 1.26sqm/boxes, 21kg/boxes.
Size: 600*600 mm, 800*800 mm is available; Thickness: 9mm Finished: polished, super glossy, nano technology Color: gray, beige, milk white , coffee, metal color, rust red Special feature: low water absorption, green and environmentalism, wearable , skipresistance, anti pollution, frost resistance. Water absorption: less than 0.3%. packing:600*600mm 4PCS/Boxes,1.44SQM/Boxes,32KG/Boxes.
Soluble salt, double loading, crystal double loading, super white, super black, dark black.
