The Grain Impurity Screen is used for cleaning different size of the impurities in the materials, such as seeds, wheat, nuts, corn, etc. Raw materials after fed into machine by elevator, light impurities and dust were sucked out through double direction of gravity catcher; The left materials enter into vibratory sieving trunk, there are two layers of sieves and the first layer can separate coarse impurities (large pieces of wood, strings and straw) bigger than the grain, while the second layer can separate fine impurities (sand and broken grain) smaller than the grain. The sieves has vibration mechanism to ensure better cleaning process by adjustable angle of engine, and rubber balls inside for the self-cleaning. This product is widely used in agricultural product processing industry of various materials, and it has become the preferred choice for a grain cleaning machine. It can be applied to the assembly line to achieve the automatic work with cyclone dust separator or pulse-jet bag filter dust collector protect working environment.
175 Model Grain De-stoner have greatly higher capacity basic on the model of 125 Grain De-Stoner, through optimization of the screen and transmission parts.This De-stoner is designed for effective removal of stones and iron, dirt, glass and other heavy impurities from crops, i.e. sunflower seeds, kernels, water melon seeds and wheat, etc. The materials passes on an inclined vibration screen with fish-skin. Materials and high density waste are separated using upward current air passed with the help of a dust removal. The heavy impurities (stones) fall through the air stream and are discharged from stone outlets. Grains suspended then sink down to grains outlet. Air volume and angle of screen can be adjusted to meet an optimal degree of separation according to different materials, and matched with cyclone can achieve the best processing effect. In addition, the excellent removal of high-density impurities like stones protects the downstream processing equipment and thus perceptibly reduces its wear and tear.
The Grain De-Stoner is designed for effective removal of stones and iron, dirt, glass and other heavy materials from crops, i.e. sunflower seeds, kernels, water melon seeds, wheat and rice, etc. The materials passes on an inclined oscillating fish-skin like screen. Materials and high density waste are separated using upward current air passed with the help of a blower. The heavy materials (stones) fall through the air stream and are discharged from stone outlet. Grains sus pended then sink down to grains outlet. Air volume and angle can be adjusted to meet an optimal degree of separation according to different materials. In addition, the excellent removal of high-density impurities like stones protects the downstream processing equipment and thus perceptibly reduces its wear and tear.
The Positive Type of Gravity Separator is a new gravity machine of positive pressure independently developed by our company. The structure of the equipment is optimized and the capacity have greatly improved basis on previous machine. Blowing gravity table produce specific gravity segregation phenomenon according to air movement and vibration, through adjusting wind pressure, amplitude and other technical parameters, larger proportion materials sink down and smaller proportion drift upward, then different proportion finished products discharge from corresponding outlets. gravity separator can effectively remove mildew grain, Shrivelled seeds, empty seed, moth eaten grain, immature grain and other impurities, widely used in wheat, corn, watermelon seed, sunflower seed, pumpkin seed, all kinds of beans and various oil crops selection processing.
This Blow/Draw Type Gravity Separator is a practical solution for screening materials that are identical in physical characteristics(length, width, thickness and shape), but where there are finer differences in the specific gravity or weight from one to another. This product is most suitable for gravity separation of beans, seeds, nuts and some dried flower, effectively remove straw, branches, stone, and imperfect seeds or grains. It utilizes blow and draw types specific gravity of positive and negative pressure to produce specific gravity segregation phenomenon under fluidization of graininess material. Through adjusting wind pressure and eccentric shaft, different proportion materials are classified l.e. large proportion materials sink down and smaller proportion drift upward, then different proportion finished products discharge from corresponding outlets while an extra outlet for stone dispatchment is also included. So, the equipment can meet the desired thousands seeds weight(TSW) and uniformity for different materials processed. The finest cooperation with relative pulse-jet bag filter dust collector is connected through axial flow fans. We recommend it in coordination with our other equipment for the best results.
The Grain Grade Cleaner is mainly used to sizing the different sizes of seeds, kernels, nuts, beans, etc. Automatic cleaning & grading procedure adopts dual vibrating motors, rubber shock absorber, different sizes of sieves and rubble balls. Materials are vibrated along sieving deck which has multi-layers, then are graded to different levels by size, while oversized and under sized impurities get removed. Customized various screen mesh and amount of sieve layers that make the vibrating grader has wide range of applications and high grading efficiency. Carbon steel or stainless steel can be chosen for quality standard of the screen materials. The product is installed behind the colour sorting machine for a final quality control, or in front of the seeds shelling machine for pre-cleaning. An optimal design, efficient grading operation and compact structure makes it an ideal grading equipment.
Color sorter is a kind of equipment which can sort out bad color particles in granular materials automatically by photoelectric detection technology according to the difference of photometric characteristics of materials. The material feeding to vibration feeder from the inlet, then into the chute evenly, the materials which have Irradiated by light exposed macro CCD camera lens, and selecting materials through chip of calculation with the microkernel architecture, the impurity put into vice-materials channel by leading electromagnetic levitation solenoid valve, finished product into the next process through the outlet. Multi-channel color sorter with more groups of channel, there is not only more materials processing capacity but also higher classification efficiency for different standard finished products. A deviceâ??s operation with a primary cleaning and check, or a primary cleaning and check plus secondary check. On the premise of increasing the output of finished material, it can also ensure that the ratio of impurities taken out is greatly reduced.
Jump is specializing in the production of fruit juice, jam processing equipment, after many years of practical experience, combined with foreign advanced technology and technology, especially the Italian juice jam processing technology, this company has formed the unique style, in the high-end configuration technology, mastered the core technology of the whole production line, including cold, hot breaking temperature control, improving pulper pulp yield limit, concentrated pot on the basis of the original more energy efficient, filling machine sterile environment live and stainless steel connection incomparable technical advantage has made the domestic enterprises.
Frozen Meat Mincer Machine Meat Processing Equipment Product Description Power: 5.5 Net weight: 600 Voltage: 380v Custom processing: Yes Type: Meat grinder Packing: according to customer requirements Dimensions: 810 570 1070 Product use: ground fresh meat, frozen meat Scope of application: meat processing plant equipment, frozen food plant equipment, snack food plant equipment Orifice: 6/8/10/12 etc. Electrical appliances: French Schneider brand Material: stainless steel SUS304 material The company's main products include smoker, sausage stuffer, meat grinder, chopper, stuffing machine, dicing machine, sausages, meatballs, fish tofu and other complete sets of equipment. From stand-alone machines to food processing lines, we help you increase the added value of your products and provide tailor-made products for different products, energy, specifications, and materials; we provide a complete set of food process design, plant design, equipment selection, personnel training, after-sales service, etc.
As a professional food machinery manufacturer, we provide professional design solutions for various industries and application scenarios. For this dried fruit production line, we can process from the smallest tens of kilograms per hour to thousands of kilograms per hour, and can be customized according to the customer's budget.
Industrial Commercial Simple Fryer French Fries Potato Chips Making Machine Frying Machine It is used to fry falafel, tempura, meatball, onion, potato chips, banana chips, whole chicken, chicken legs, chicken nuggets, meat nuggets, shrimp, peanuts, beans, vegetables and other products.
Our machine can intelligently weigh and sort a variety of fruits, such as watermelon, cantaloupe, honeydew melon, grapefruit, apple, orange, avocado, citrus, prickly pear, dragon fruit, mango, kiwi, peach, pear, apricot, plum, western Plum, tomato, longan and more. Our equipment has a number of independent core technologies from R&D design to manufacturing and installation. Provide a complete set of solutions for post-harvest processing of fruits, and pursue to provide customers with higher product added value and market competitiveness.
Introduction of churros machine with filler: Churro is a kind of snack food, strip pasta originated , which is the most characteristic of Spain snacks, often taste with the hot chocolate as well as the ice-cream, jam, full of charm and fragrance. It is also popular. The churros machine with filler is the machine to make this kind of delicious food. Features of churros machine with filler: 1. Model ALCM-5L-12L are operated by manual, so we suggest to use with a electric/gas fryer. 2. Adopting stainless steel as material makes them looking elegant, luxury and fashion. 3. When you using it in coffee bar, drinking bar, theater, shop or even in mall, not only can make the delicious churros, but also can be displayed as an art exihbit. 4. Easy to operate. Other Information: Our company is mainly engaged in the development and manufacturing of agricultural machinery, food machinery, feed machinery, wood machinery, coal machinery and other machinery.
Full Automatic Fresh Or Cooked Noodles Making Machine Model: M-270, M-440, M-800 Capacity: 200kg/h, 500kg/h, 1000kg/h Machine list: Machine List: 1.Automatic dough mixer ( with automatic flour & water feeding device) 2.Compound dough sheeter 3. Continuous Sheeter 4. Automatic Ferment box 5.Automatic noodle caldron 6.Quantitative cutting machine 7. Automatic noodles packing machine
This is an ultrasonic cutting machine for food controlled by 5-axis servo motor system, can be linked to chain slat type tunnel oven, automatic belt convey and cutting products of 600x600mm, and it equipped with automatic paper removal function, and security system of security door, frequency ultrasonic scan and fault indicator lamp. Application 1. Bread cutting 2. Cut the cake 3. Cheese cutting 4. Dough cut 5. Cookie cutter 6. Gummy nougat cutting 7. Pizza cheese and butter 8. Cut frozen meat and aquatic products 9. Plant fiber, nut cutting Other products feel free to contact us>> Technical Features A.It consists of cutting machine, conveyor belt, and ultrasonic generator, the knife be controlled by the ultrasonic sound, so cutting be quick and cutting surface be tidy, better shape for final goods. B.Stainless steel structure, easy to clean, serve motor, fast and stable. For automatically cutting cake, bread, nougat,frozen cake, Halva Bar etc. C.It is the fastest and most convenient type, the cutting cross section will be very tidy and uniform. D.Cutting Speed: 45 times/minute(Right and Left);1000mm/minute(front, rear, right and left); Cutting Error:�±1mm E.Machine could be customized according to the customersâ?? requirement. F.With automatic front baffle G.Control system: independent development of multiaxis control system H.Multiaxis displacement driving device: Servo motor-precise positioning I.Automatic up and down drive:Servo motor-multi-stage variable speed, adjustable cutting speed J.Safety protection Grating: open to stop, proximity switch sensing device K.Intelligent Touch Screen Panel: Friendly interpersonal interface, automatic mode, jog mode optional, all kinds of cutting options, the system comes with password system protection L.Ultrasonic Generator: Automatic tracking, real-time tracking the frequency of ultrasonic cutting blade. Advantage 1. Ultrasonic cutting reduces friction, fine incision, no chip, no deformation, smooth and beautiful section. 2. Dimensional accuracy: plus or minus 1mm. 3. Can be used as a stand-alone machine or embedded solution. 4. Fast and precise because of unique servo technology. 5. Advanced software to set product parameters using icons on the touch screen. 6. A high quality safety system prevents access of the cutting area during operation. 7. After the setting is completed, a key start, automatic cutting. 8. Automatically chase ultrasonic drive power, real-time tracking of ultrasonic cutting knife frequency, to ensure that the ultrasonic cutter work in a stable state, suitable for long hours of continuous work.
This is an ultrasonic cutting machine for food controlled by 5-axis servo motor system, can be linked to chain slat type tunnel oven, automatic belt convey and cutting products of 600x600mm, and it equipped with automatic paper removal function, and security system of security door, frequency ultrasonic scan and fault indicator lamp. Application 1. Bread cutting 2. Cut the cake 3. Cheese cutting 4. Dough cut 5. Cookie cutter 6. Gummy nougat cutting 7. Pizza cheese and butter 8. Cut frozen meat and aquatic products 9. Plant fiber, nut cutting Other products feel free to contact us>> Technical Features A.It consists of cutting machine, conveyor belt, and ultrasonic generator, the knife be controlled by the ultrasonic sound, so cutting be quick and cutting surface be tidy, better shape for final goods. B.Stainless steel structure, easy to clean, serve motor, fast and stable. For automatically cutting cake, bread, nougat,frozen cake, Halva Bar etc. C.It is the fastest and most convenient type, the cutting cross section will be very tidy and uniform. D.Cutting Speed: 45 times/minute(Right and Left);1000mm/minute(front, rear, right and left); Cutting Error:�±1mm E.Machine could be customized according to the customersâ?? requirement. F.With automatic front baffle G.Control system: independent development of multiaxis control system H.Multiaxis displacement driving device: Servo motor-precise positioning I.Automatic up and down drive:Servo motor-multi-stage variable speed, adjustable cutting speed J.Safety protection Grating: open to stop, proximity switch sensing device K.Intelligent Touch Screen Panel: Friendly interpersonal interface, automatic mode, jog mode optional, all kinds of cutting options, the system comes with password system protection L.Ultrasonic Generator: Automatic tracking, real-time tracking the frequency of ultrasonic cutting blade. Advantage 1. Ultrasonic cutting reduces friction, fine incision, no chip, no deformation, smooth and beautiful section. 2. Dimensional accuracy: plus or minus 1mm. 3. Can be used as a stand-alone machine or embedded solution. 4. Fast and precise because of unique servo technology. 5. Advanced software to set product parameters using icons on the touch screen. 6. A high quality safety system prevents access of the cutting area during operation. 7. After the setting is completed, a key start, automatic cutting. 8. Automatically chase ultrasonic drive power, real-time tracking of ultrasonic cutting knife frequency, to ensure that the ultrasonic cutter work in a stable state, suitable for long hours of continuous work.
This is an ultrasonic cutting machine for food controlled by 5-axis servo motor system, can be linked to chain slat type tunnel oven, automatic belt convey and cutting products of 600x600mm, and it equipped with automatic paper removal function optional, and security system of security door, frequency ultrasonic scan and fault indicator lamp. Application 1. Bread cutting 2. Cut the cake 3. Cheese cutting 4. Dough cut 5. Cookie cutter 6. Gummy nougat cutting 7. Pizza cheese and butter 8. Cut frozen meat and aquatic products 9. Plant fiber, nut cutting Other products feel free to contact us>> Advantage: 1. Ultrasonic cutting reduces friction, fine incision, no chip, no deformation, smooth and beautiful section. 2. Dimensional accuracy: plus or minus 1mm. 3. Can be used as a stand-alone machine or embedded solution. 4. Fast and precise because of unique servo technology. 5. Advanced software to set product parameters using icons on the touch screen. 6. A high quality safety system prevents access of the cutting area during operation. 7. After the setting is completed, a key start, automatic cutting. 8. Automatically chase ultrasonic drive power, real-time tracking of ultrasonic cutting knife frequency, to ensure that the ultrasonic cutter work in a stable state, suitable for long hours of continuous work. Technical Features A.It consists of cutting machine, conveyor belt, and ultrasonic generator, the knife be controlled by the ultrasonic sound, so cutting be quick and cutting surface be tidy, better shape for final goods. B.Stainless steel structure, easy to clean, serve motor, fast and stable. For automatically cutting cake, bread, nougat,frozen cake, Halva Bar etc. C.It is the fastest and most convenient type, the cutting cross section will be very tidy and uniform. D.Cutting Speed: 45 times/minute(Right and Left);1000mm/minute(front, rear, right and left); Cutting Error:�±1mm E.Machine could be customized according to the customersâ?? requirement. F.With automatic front baffle G.Control system: independent development of multiaxis control system H.Multiaxis displacement driving device: Servo motor-precise positioning I.Automatic up and down drive:Servo motor-multi-stage variable speed, adjustable cutting speed J.Safety protection Grating: open to stop, proximity switch sensing device K.Intelligent Touch Screen Panel: Friendly interpersonal interface, automatic mode, jog mode optional, all kinds of cutting options, the system comes with password system protection L.Ultrasonic Generator: Automatic tracking, real-time tracking the frequency of ultrasonic cutting blade.
This is an ultrasonic cutting machine for food controlled by 5-axis servo motor system, can be linked to chain slat type tunnel oven, automatic belt convey and cutting products of 600x600mm, and it equipped with automatic paper removal function optional, and security system of security door, frequency ultrasonic scan and fault indicator lamp. Application 1. Bread cutting 2. Cut the cake 3. Cheese cutting 4. Dough cut 5. Cookie cutter 6. Gummy nougat cutting 7. Pizza cheese and butter 8. Cut frozen meat and aquatic products 9. Plant fiber, nut cutting Other products feel free to contact us>> Advantage: 1. Ultrasonic cutting reduces friction, fine incision, no chip, no deformation, smooth and beautiful section. 2. Dimensional accuracy: plus or minus 1mm. 3. Can be used as a stand-alone machine or embedded solution. 4. Fast and precise because of unique servo technology. 5. Advanced software to set product parameters using icons on the touch screen. 6. A high quality safety system prevents access of the cutting area during operation. 7. After the setting is completed, a key start, automatic cutting. 8. Automatically chase ultrasonic drive power, real-time tracking of ultrasonic cutting knife frequency, to ensure that the ultrasonic cutter work in a stable state, suitable for long hours of continuous work. Technical Features A.It consists of cutting machine, conveyor belt, and ultrasonic generator, the knife be controlled by the ultrasonic sound, so cutting be quick and cutting surface be tidy, better shape for final goods. B.Stainless steel structure, easy to clean, serve motor, fast and stable. For automatically cutting cake, bread, nougat,frozen cake, Halva Bar etc. C.It is the fastest and most convenient type, the cutting cross section will be very tidy and uniform. D.Cutting Speed: 45 times/minute(Right and Left);1000mm/minute(front, rear, right and left); Cutting Error:�±1mm E.Machine could be customized according to the customersâ?? requirement. F.With automatic front baffle G.Control system: independent development of multiaxis control system H.Multiaxis displacement driving device: Servo motor-precise positioning I.Automatic up and down drive:Servo motor-multi-stage variable speed, adjustable cutting speed J.Safety protection Grating: open to stop, proximity switch sensing device K.Intelligent Touch Screen Panel: Friendly interpersonal interface, automatic mode, jog mode optional, all kinds of cutting options, the system comes with password system protection L.Ultrasonic Generator: Automatic tracking, real-time tracking the frequency of ultrasonic cutting blade.
It is multifunctional ultrasonic cutting machine for bakery food, 4-axis servo motor control system, the size can meet the requirements of small factory or bakery house for cake/bread/cheese/dough/candy cutting, it can cut different sizes of round cake or rectangular cake under 400*600mm. Infrared inspection, frequency ultrasonic scan and fault indicator lamp make it safe for operator, as an independent working machine, it cannot be connected with production line. Technical Features A.It consists of cutting machine, conveyor belt, and ultrasonic generator, the knife be controlled by the ultrasonic sound, so cutting be quick and cutting surface be tidy, better shape for final goods. B.Stainless steel structure, easy to clean, sew motor, fast and stable. For automatically cutting cake, bread, nougat,frozen cake,Halva Bar etc. C.It is the fastest and most convenient type, the cutting cross section will be very tidy and uniform. D.Cutting Speed: 45 times/minute(Right and Left);1000mm/minute(front, rear, right and left); Cutting Error:±1mm E.Machine could be customized according to the customers requirement. F.With automatic front baffle G.Control system: independent development of multiaxis control system H.Multiaxis displacement driving device: Servo motor-precise positioning I.Automatic up and down drive:Servo motor-multi-stage variable speed, adjustable cutting speed J.Safety protection Grating: open to stop, proximity switch sensing device K.Intelligent Touch Screen Panel: Friendly interpersonal interface, automatic mode, jog mode optional, all kinds of cutting options, the system comes with password system protection L.Ultrasonic Generator: Automatic tracking, real-time tracking the frequency of ultrasonic cutting blade. Advantage 1. Ultrasonic cutting reduces friction, fine incision, no chip, no deformation, smooth and beautiful section. 2. Dimensional accuracy: plus or minus 1mm. 3. Can be used as a stand-alone machine or embedded solution. 4. Fast and precise because of unique servo technology. 5. Advanced software to set product parameters using icons on the touch screen. 6. A high quality safety system prevents access of the cutting area during operation. 7. After the setting is completed, a key start, automatic cutting. 8. Automatically chase ultrasonic drive power, real-time tracking of ultrasonic cutting knife frequency, to ensure that the ultrasonic cutter work in a stable state, suitable for long hours of continuous work.
This is compact slicer machine with conveyor belt, it can meet the requirements of factory and baking home for high speed continuous cutting machine, its cut speed can up to 180 cuts/minute, can cut kinds of products such as cake, bread, cookies, nought, candy, cheese, protein bar and so on. Technical Features A.It consists of cutting machine, conveyor belt, and ultrasonic generator, the knife be controlled by the ultrasonic sound, so cutting be quick and cutting surface be tidy, better shape for final goods. B.Stainless steel structure, easy to clean, serve motor, fast and stable. For automatically cutting cake, bread, nougat,frozen cake, Halva Bar etc. C.It is the fastest and most convenient type, the cutting cross section will be very tidy and uniform. D.Cutting Speed: 45 times/minute(Right and Left);1000mm/minute(front, rear, right and left); Cutting Error:�±1mm E.Machine could be customized according to the customersâ?? requirement. F.With automatic front baffle G.Control system: independent development of multiaxis control system H.Multiaxis displacement driving device: Servo motor-precise positioning I.Automatic up and down drive:Servo motor-multi-stage variable speed, adjustable cutting speed J.Safety protection Grating: open to stop, proximity switch sensing device K.Intelligent Touch Screen Panel: Friendly interpersonal interface, automatic mode, jog mode optional, all kinds of cutting options, the system comes with password system protection L.Ultrasonic Generator: Automatic tracking, real-time tracking the frequency of ultrasonic cutting blade.
