High silica fiberglass chopped strand is a kind of inorganic fiber, which is drew and winded from glass marbles through a system of na2o-b2o3-sio2. High silica chopped strand with low thermal conductivity and high temperature resistance is a kind of excellent high temperature insulator. 5. Off-gas filter, dust collection 6. Exhaut pipe silencer, noise reduction 7. Thermal insulation of spacecrafts, etc. Properties High silica chopped strand is excellent in high temperature resistance. 1) high temperature resistance, ablation resistance, heat resistance 2) low thermal shrinkage, low thermal conductivity 3) high electrical insulation 4) after two hours ablation in 1000¡ãc, the strands perform well 5) non-toxic, asbestos-free, environmental friendly. Specification High silica chopped strand is a kind of roving with staple length.
E glass chopped strand mat E glass chopped strand mat is made from e-glass chopped strands around 50mm in length, bonded together by powder or emulsion binder which is extremely soluble in styrene. The basic strand has a sizing system containing a silane coupling agent. 1. Excellent impregnation properties 2. Excellent conformability 3. Good mechanical properties 4. Good drapability 5. High tensile strength
E-cr roving, e glass roving boron-free, low boron E-cr roving boron-free is a kind of continuous e glass roving, boron-free. Ecr roving is unbonded borosilicate e glass fiber; it is capable of withstanding severe thermal shock and vibration. E-cr roving is stable in serious environment; it shows exceptional recovery from compression, does not accelerate corrosion of metallic components. E-cr roving exhibits excellent acoustic properties, marking it suitable for use in many types of hot silencing applications, including exhausts with high gas flow rates. 6. Withstanding severe thermal shock and vibration Techinical papameters Specifications E-cr roving is available from 300tex to 9600tex. 20 pallets/ 20'fcl Aprx. 20 metric tons/20'fcl
Fe.Csm 100/120/150/200/250/300/380/450/600g/m^2 width:900-3200mm Re.Csm 100/120/150/200/250/300/380/450/600g/m^2 width:900-3200mm Width:900-3200mm
Fe.Csm 100/120/150/200/250/300/380/450/600g/m^2 width:900-3200mm Re.Csm 100/120/150/200/250/300/380/450/600g/m^2 width:900-3200mm Width:900-3200mm
Fe.Csm 100/120/150/200/250/300/380/450/600g/m^2 width:900-3200mm Re.Csm 100/120/150/200/250/300/380/450/600g/m^2 width:900-3200mm Width:900-3200mm
Fe.Csm 100/120/150/200/250/300/380/450/600g/m^2 width:900-3200mm Re.Csm 100/120/150/200/250/300/380/450/600g/m^2 width:900-3200mm Width:900-3200mm
02, 04, 06, 08 02, 04, 06, 08
D16-24mm length 1200-2600mm Rod ultimate load 80-160kn Pallet size:120x120x6 120x120x10 150x150x8 150x150x10 150x150x10
We, rell composite , specializing in grp molded gratings, grp pultruded gratings, grp pole, square tube, round tube, i beam, wide flange beam, equal angle, c channel, flat panel, solid panel, fiberglass board, flat tube, kick plate, y shaped angle, high strength deck panel, flat strip, grp round/square rod, stair nosing, stair tread, stair cover, handrail, ladder, drain cover, manhole cover, grp fittings, gratings clips, grp flanges, grp fittings, grp cable trays, frp/grp hand-lay-up custom products and so on.
We, rell composite , specializing in grp molded gratings, grp pultruded gratings, grp pole, square tube, round tube, i beam, wide flange beam, equal angle, c channel, flat panel, solid panel, fiberglass board, flat tube, kick plate, y shaped angle, high strength deck panel, flat strip, grp round/square rod, stair nosing, stair tread, stair cover, handrail, ladder, drain cover, manhole cover, grp fittings, gratings clips, grp flanges, grp fittings, grp cable trays, frp/grp hand-lay-up custom products and so on.
Reinforced fiberglass mesh High strength mesh, eifs mesh available, strong and flexible mesh 1.Fiberglass mesh for wall reinforces; 2.Mainly used for interior wall and external wall reinforces, eifs construction, and etc; 3. Various color available, width range:0.6m-1.1m; 4.Customized service available Mesh weight: 70gsm, 80gsm, 90gsm, 110gsm, 120gsm, 135gsm, 145gsm, 150gsm, 160gsm, 165gsm, 300gsm. Any color available. Size:1x50m/roll Mesh size:4x4mm, 5x5mm, 10x10mm, 12x12mm, etc
Fiberglass tape, high tensile strength tape, with continous glass filament, clean removal Fiberglass tape, high tensile strength tape, with continous glass filament, clean removal, especially for large merchandise. Applications: 1. Securing and stablizing large home appliance or furniture during shipping, preventing components from abrasion and scuff. 2. Pallentizing of cartons and boxes during shipping; reinforcing boxes, protecting contents from pilferage. 3. Pipeline stablizing. 4. Strapping rods, moulding, tubes plywood danger of scratching, staining or damaging. Available size: Jumbo roll: 1020mm 1000m Finished rolls: as customers' requirement. 5mmx90m/roll, weight, packing as your per requirement
Fiberglass duct rodder Duct rodder is composed of fiberglass rod which is extruded by fiber glass rod and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It is covered by a high density polyethylene engineering plastic as it protect layer, which make duct rodder cover sliding on the surface, durable, corrosion resistant and has good insulation performance. Which make them safe for use in cable pulling in the conduit. Duct rodders will equipped with different size reel according to the length of rod. There are wheels on the reel, which could make it easy to move. Features and benefits: Light weight, durable, resistance to acid, aging resistant, corrosion resistant High tensile strength and bending properties, which make it to go through narrow pipes easily. Good temperature adaptability, the product will not soften in hot weather/nor become brittle in cold weather. It is usability will not be affected by temperature. Outer protect layer are made of high density polyethylene engineering plastic, which has good anti-UV capability. cover was coated with long-term UV-resistant polyethylene. it surface has the advantage of smooth, wear-resistant and long service life. There are meter mark on the protect layer of duct rodder. The length is 100m to 400m. There are kinds of colors for the rod to choose. Technical Data of Duct Rodders: 1. Reinforce Fiberglass core Property Data and Value Reinforcement E-Glass Fiber Glass content of inner part 80-85% Material of pulling rod Epoxy fiber glass(inner) and high density polyethylene(outer) Density >150g/m Diameter tolerence ¡À0.10mm Work situation temperature -40 ~ +80 Mechanical properties Property data Min pulling strength 4000N 5% Tensile modulus >30000 MPa Consistency of rod 150g ¡ 5% Flexural modulus >30000 MPa Elongation at Break 2.5-3% 2. Polyethylene cover Material: Medium Density polyethylene resin for the insulating and jacketing of telecommunication cables. Property Data Tensile strength >150N Environmental stress & crack resistance >1000 hr Heat stability ok Carbon Black ok plastic woven 0.5*0.15*0.5m 1.5*0.5*1.5m
Cable pulling rod & push duct rodder & fiber snake rod Epoxy duct rodder is the continuous rods sizes are 4.5mm 6mm 9mm 10mm 11mm 12mm 13mm 14mm 15mm 16mm, the duct rodders¡¯ lenghth is range 50m to 400m. Duct rodders/rods features Strong non-conductive fiberglass rod construction Stainless steel drawing head For longer conduit runs and underground duct Rugged tubular steel reel with adjustable position. Feed device allows rod to feed out or be wound back onto reel with easy pushi or pull of rod. Duct rods/duct rodders have many applications, not only pulling the cable but also pulling electric tools, and it repair is very easy, and available. Glass fiber rod diameter 4-16mm Length 100-400m Working temperature -40 ~ +80 Min bend radius 390mm Breaking tension 4500-9000kg Glassfiber density 150g/m Plastic woven 0.5*0.15*0.5m 1.5*0.5*1.5m
Fibreglass duct rod/duct rodder/ fiberglass conduit rod description: Fiberglass duct rod applies in tow lead-rope through a pipe, it is auxiliary means. Surface smooth and high resilience, so the frp perforator with ease passes the narrow channel. Perforator consists of two parts: the glass fiber strengthen the level, the high-pressured low density polyethylene protective layer(smooth, firm , can resist the adverse circumstance). It has time-savingreducing effort, improving efficiency, etc, and can be used for telecom cables, cable pipe and cleaning and plastic pipe of cloths to put.When use draws out the fpr pole by the pulley, then with a corresponding metal joint, penetrates in the pipeline. When cleaning, guide-head will drive cleaning tools to clean the pipe;when arranges the cable, you may first leads the steel wire or the iron wire, then enters the pipe with the steel wire or the iron wire hauling cable. Fibreglass duct rod/duct rodder/ fiberglass conduit rod features&benefits: 1. Strong non-conductive fiberglass rod construction 2. Stainless steel drawing head 3. For longer conduit runs and underground duct 4. Rugged tubular steel reel with adjustable position. 5. Feed device allows rod to feed out or be wound back onto reel with easy pushi or pull of rod. 6. Duct rods/duct rodders have many applications, not only pulling the cable but also pulling 7. Anticorrosion , good elasticity , long working life. Glass fiber rod diameter 4-16mm Length 100-500m Working temperature -40+80 Min bend radius 295mm Breaking tension 4.5t Glassfiber density 150g/m Plastic woven 0.5*0.15*0.5m 1.5*0.5*1.5m
Silicone glassfiber sleeving is baided into tubes with non-alkli glassfiber , and then painted with silicone through high temperature .It has such features as excellent electricity-avoidness, flame off -self and flexibility.It is widely used in insulating protection of h&n grade automobile¡¢shipbuiding¡¢electrial machinery , home appliance, elctric&heat equipment , special lightware and internal wires bunching of tv and electronic equipment, etc technology index off-self time: 30seconds Type/file no. Testing condition lighting-resistance temperature-resistance inserting voltage average voltage individual value Sgs-15 e233804 ul1441 ul v w-1 +200-10 c 1500v 1000v Sgs-25 e233804 ul1441 ul v w-1 +200-10 b 2500v 1800v Srs-70 e233803 ul1441 ul v w-1 +200-10 a 7000v 5000v ¡¡ inside diameter measurement: Inside diameter the minimum wall thickness Range tolerance a grade b, c, grade 0.5-2.5mm +0.25-0.00mm 0.38mm 0.20mm 3.0-4.5mm +0.30-0.00mm 0.45mm 0.23mm 5.0-6.0mm +0.40-0.00mm 0.45mm 0.28mm 7.0-9.0mm +0.55-0.00mm 0.50mm 0.32mm 10.0-14.0mm +0.75-0.00mm 0.60mm 0.40mm 15.0-25.0mm +0.85-0.00mm 0.64mm 0.43mm. 100m/roll
Fiberglass roofing tissue is mainly used as excellent substrates for SBS and APP waterproofing membrane. The longitudinal strength and tear resistance be improved further by incorporating reinforcements into the tissue across its whole width. Main Features: 1, Fiber uniformly dispersed, flat is good 2, High tear strength 3, Dimensional stability, asphalt impregnated fast 4, Strong anti-embrittlement, aging, weathering 5, Excellent anti-leakage. 50g/m2.
Material: C-glass or E-glass Specs: weight: 60 to 350g/m2 Size: 2.5x2.5mm to 10x10mm Feature: 1. Excellent alkaline resistance and corrosion resistance 2. High tensile strength and impact resistance 3. Good dimensional stability and deformation resistance 4. Good adhesion with resins and water resistance 5. Temperature stability and flame resistance 6. Soft, flexible and well arranged, simple and easy to apply 7. Aging resistance 8. Durable, versatile and cost-effective Usage: used to reinforce cement, plastic, bitumen, plaster, marble, mosaics, roofing, interior and exterior walls, and in other industrial applications. Standard export packing or as request.
Industries Served: Applied in various sports equipent. We offer custom-made parts. Functions and Characteristic 1. Light weight, high strength. The specific weight of FRP pultrusion fiberglass tube is 1.8-2.1g/cm, only 1/4 of steel. It is easy for transportation and installation. Compared with plastic, the strength is ten times of plastic products. 2. Corrosion-resistance, anti-aging and with a long service life. It can be used in different corrosive environment, such as acid, alkali, salt, some organic solvent and so on. In the areas of corrosion-resistance, it has the superiority that other metals can not compared with. Adding to the characteristics of good resistance to water and aging, its service life could be expected to more than 15 years. 3. Good security. FRP pultrusion fiberglass tube has excellent electrical insulation, non-magnetic, no spark and can also be add the process of flameproof according to user¡¯s needs. 4. Good resistance to impact and can be designed freely. Better resistance to impact and fatigue make carbon fiber composite products can be bended repeated without permanent deformation. Otherwise, it can be designed into different sections according to the customers¡¯ demand. 5. Colourful and Economics. FRP pultrusion fiberglass tubes have various specifications and the colors can be designed according to customer¡¯s requirements. In addition, the price is affordable and have a good future. 10000.
