Our company can produce many kinds of water pumps, as well as many band water pumps, such as the TCM, Toyota, KUMATSU. For that, our company can make this parts according to the customers requirements.
Four Ropes Orange Peel Grab is equipped for the crane which has two hoisting drums and it is an efficient tool for loading and unloading steel scraps, ore and clinker.
The mechanical structure for opening & closing is succinct and original. It is easy to use and can work under any circumstances in order.
Now the grabs are widely used in ports, vessel, mine, metallurgy, dump, and are exported in batches.
Wireless remote control grab is a new type single type opened in the air without any additional energy.
It has the advantages of simple structure and good perform of rope grab and also the high productivity of the powered grab.
It can be used in single hook crane and ship deck cranes. The grab is widely used in ship, port, railway station, factory, mine and other transport departments. Suitable for all type of bulk cargos like grain, fertilizers, cement, coal, barley, wheat, iron ore, sun flower seed, corn, maize, clay and etc.
Manufactured in every capacity 3 cbm to 30 cbm with reducing capacity system.
Supplied with removable spill plates, giving the capability to work light and heavy cargos with the one grab.
Radio remote control unit gives facility to start or stop the grab with one button. Radio control unit will operate from 100 m distance from the grab.
Work with oil circulation and battery.
Hydraulic clamshell grab is an efficient tool for loading and unloading sands, coal, mineral powder and bulk chemical fertilizer.
The grab has hydraulic system itself, and the hydraulic system is imported from Germany, so it has high performance.
It can work under any circumstances in order.
The mechanical structure is succinct and original and it is easy to use.
The scoop of grab is particular, so it easy to grab bulk materials.
The grab has tie-in on the grab and it is easy to connect to the crane.
Working temperature:
-20 --- + 60
-40 --- + 80
Working humidity: 95%/25
Combined error: 1%
Power supply: ac220v (to be customized according to clients requirement)
Parameter:
Rated load, actual load, trolley amplitude, hook height and moment percentage
Signal lamp&buzzer:
Flickering yellow lamp and buzzers discontinuous response indicates early warning, whereas red lamp and buzzers continuous indicates alarm and relay outputs.
Other functions:
Records downloading; sensors self-diagnostic; applicable to tower crane with standard fall
Remarks: cxt/20p-i is a basic model while cxt/20p-ir add the function of slewing indication and cxt/20p-if adds the function of anemometer.
Cxt/800 system protection
Tower crane anti-collision protection
If tower cranes are with the same height, this system can control and handle it effectively, once detecting that the running jibs interfere with each other automatically. While not with the same height, this system can also work effectively once acticipating the hook or cable of the higher tower crane may collide the jib or couter jib of lower one.
Zone(obstacle) anti-collision
Due to the complexity of some sites, the system can automatically and effectively determine up to 10 prohibited zones in which the hook or jib are not allowed to operate.
Boundary protection
Complicated environment usually exists around work site.The cxt/800 system can be preset with a up to 30-point boundary protection area in which the operating or over-flying of hook is not allowed. It can effectively prevent accielents from happening.
Pre-alarm/alarm and control
Cxt/800 system allows the operator to work at maximum efficient way and optimize the use of
Crane. Once monitoring the pre-set data for possible collisions in crane interference area and over-flying of sensitise areas, there will be pre-alarm and visual and audible alarm and the system will stop the maneuver automatically to maintain a safety margin.
WTAU crane LMI is Designed for use on Lattice cranes, Tower Cranes And Mobile Cranes, it's installed and calibrated to the load chart of each crane including specific load and geometric limits on Boom Length ,angle, and operating radius. Load Moment Indicator gives the operator the information necessary to fully utilize the cranes capacity while keeping within the working limits of the crane.
Efficiency and Productivity improvement, Quick and Easy calibration and Exclusive calibration procedure done through the operators console .Measures True Load Moment By measuring true load moment, The LMI senses boom dynamics, load swing out, wind loading, shock load and effects of boom deflection.
Self-Diagnostics -Continuously monitors system and sensors. Error codes are displayed to help identify problems and minimize downtime. Control's Lever Lockout -When the LMI system senses and overload or an impending two-block condition, the provides a relay output which can be used to engage an optional lever lockout.
WTAU Provides Various Types of LMI SYSTEMS , such as WTL- A700, WTL-A200,WTL-A100N, WTL-650V3,WTZ-A101, Provides a Full Service Repair, Upgrade and Installion for the load moment indicator .
Data Logger Can Be Customized
The data logger system records the moment system parameters and the alarm data of moment
system for crane in using status. The data logger protects the parameters and system data. If there are security incidents, these parameters provide the parameters and data for the crane operation; Equipment maintenance personnel can also use data to analysis system performance and make reference for equipment maintenance.
Data Record Capacity
1 record per second, 1 hour is 3600 records, 24 hours a day continuous record, then the day
is3600 * 24 = 86400 records. Each record 180 bytes (the longest), then total of 15.6M per day data, about
16M. If Encrypted data, 4G memory, can only be calculated by 2G, that is 1870M. 1870/16 = 116.5
days ,4G memory can record about 4 months.
Technical Parameters
Model: WTL-A700 Control Output:
Display:8 inch LCD System Composition Error: �±5%(F.S.)
Working Temperature: -20�ºC~70�ºC Power Comsumption:60db
Weight Measurement Range: 0T~999.9T IP Grade: IP 65
Resolving Ability: 0.1T Power Supply: AC220V/DC24V
Singal Input:
GJ-type Limit Switch (hook limit switch) is used for lifting wire rope anti-volume limit an electrical automatic protection switch. It is an appropriate weight of the hammer supporting the use of hook up and down movement to hold up or disconnect or turn-on switch, put down the hammer to achieve the purpose of automatically cut off the hoist power supply connected braking system to limit rope over volume, and reach hook in the purpose of a certain height within the lift.
Our gear can be standard as per European or American standard or special as per your drawing or sample.
Features:
1 Material: carbon steel such as C45, 20CrMnTi, 40Cr, 42CrMo or
stainless steel or copper or nylon and so on
2 Heat Treatment: Hardening and Tempering, High Frequency
Quenching, Carburizing Quenching, and so on.
3 Standard: European or American standard
4 Item: M0.5,M1 .M1,5,M1,7,M2,M2.5,M3,M4,M5,M6 and so on
5 Export Area: Europe and America
6 OEM service: make based on your special sample or drawing and
meet your need for high precision on teeth of the gear
Except the Sumitomo LS118RH5 Top Roller, we can supply Sumitomo LS118RH5 Track Shoe, LS118RH5 Idler and LS118RH5 Sprocket.
iF YOU need Sumitomo Crawler Crane LS118RH5 Undercarriage Parts, please email to us
Place of Origin: Zhejiang, China (Mainland)
Brand Name: WOKAITE
Model Number:SSDHL02-01
Usage: Construction Hoist
Power Source: Electric
Sling Type: Chain
Maximum Lifting Weight: 2.50ton
Maximum Lifting Height: 100m
Lift Speed: 6.6 meter/min
Certification: CE & ISO & SGS
Warranty: One Year After-sales
Service Provided:Engineers available to service machinery overseas
Capacity: 2 ton
Test load: 2.50 ton
Standard Lifting Height: 3 meter
Lifting Speed: 6.6 m/min
Lifting Motor: 3.0 kW
Rotation speed: 1440 r/min
Insulation grade: F
Travelling Speed: 10/20 m/min
Travelling Motor: 0.75 kW
Control Voltage: 24V/36V/48V
Working Voltage: 3P/ 200V-600V
Working Level: M4/1Am
SupplyAbility: 10000Set/Sets per Month Customize Available
Packaging Detailsseaworthy carton + pallet
PortShanghai , Ningbo , Guangzhou or as request
Lead Time :within 15 days after order confirmation
Business Type: Exporter,Manufacturer, Wholesaler,Supplier
Main Products: CRANES,ELECTRIC HOIST,MANUAL HOIST,WINCHES,MATERIAL HANDLING EQUIPMENT
Total Annual Revenue: US$1 Million - US$2.5 Million
Top 3 Markets:
South America 25.00%
North America 15.00%
Africa 15.00%
Place of Origin: Zhejiang, China (Mainland)
Brand Name: WOKAITE
Model Number:SSDHL02-01
Usage: Construction Hoist
Power Source: Electric
Sling Type: Chain
Maximum Lifting Weight: 2.50ton
Maximum Lifting Height: 100m
Lift Speed: 6.6 meter/min
Certification: CE & ISO & SGS
Warranty: One Year After-sales
Service Provided:Engineers available to service machinery overseas
Capacity: 2 ton
Test load: 2.50 ton
Standard Lifting Height: 3 meter
Lifting Speed: 6.6 m/min
Lifting Motor: 3.0 kW
Rotation speed: 1440 r/min
Insulation grade: F
Travelling Speed: 10/20 m/min
Travelling Motor: 0.75 kW
Control Voltage: 24V/36V/48V
Working Voltage: 3P/ 200V-600V
Working Level: M4/1Am
SupplyAbility: 10000Set/Sets per Month Customize Available
Packaging Detailsseaworthy carton + pallet
PortShanghai , Ningbo , Guangzhou or as request
Lead Time :within 15 days after order confirmation
Business Type: Exporter,Manufacturer, Wholesaler,Supplier
Main Products: CRANES,ELECTRIC HOIST,MANUAL HOIST,WINCHES,MATERIAL HANDLING EQUIPMENT
Total Annual Revenue: US$1 Million - US$2.5 Million
Top 3 Markets:
South America 25.00%
North America 15.00%
Africa 15.00%
Place of Origin: Zhejiang, China (Mainland)
Brand Name: WOKAITE
Model Number: SSDHL05-02
Usage: Construction Hoist
Power Source: Electric
Sling Type: Chain
Maximum Lifting Weight: 6.25ton
Maximum Lifting Height: 100m
Lift Speed: 2.7 meter/min
Certification: CE & ISO & SGS
Warranty: One Year After-sales
Service Provided:Engineers available to service machinery overseas
Capacity: 5 ton
Test load: 6.25 ton
Standard Lifting Height: 3 meter
Lifting Speed: 2.7 m/min
Lifting Motor: 3.0 kW
Rotation speed: 1440 r/min
Insulation grade: F
Travelling Speed: 10/20 m/min
Travelling Motor: 0.75 kW
Control Voltage: 24V/36V/48V
Working Voltage: 3P/ 200V-600V
Working Level: M4/1Am
SupplyAbility: 10000Set/Sets per Month Customize Available
Packaging Detailsseaworthy carton + pallet
PortShanghai , Ningbo , Guangzhou or as request
Lead Time :within 15 days after order confirmation
Business Type: Exporter,Manufacturer, Wholesaler,Supplier
Main Products: CRANES,ELECTRIC HOIST,MANUAL HOIST,WINCHES,MATERIAL HANDLING EQUIPMENT
Total Annual Revenue: US$1 Million - US$2.5 Million
Top 3 Markets:
South America 25.00%
North America 15.00%
Africa 15.00%
607 Crane Parts Suppliers
Short on time? Let Crane Parts sellers contact you.
