Automatic transfer switch is one of adopted international ATSE technology developed by our company. It is suitable for power supply system with rated insulating voltage is AC800V, rated working voltage is AC240/415V, and below DC250V, and AC 50Hz/60Hz, rated working current is 16A-3200A of two-path. The transfer switch and the matching intellect display, they are main used for high building, the post and communication, coal mining, shipping, military facilities industrial assembly line etc the situation of need the interruption power supply. 273*245*120
Media converter Parameter Specifications Access mode 10/100mbps Standard Ieee802.3 10base-t ethernet, ieee802.3u, 100base-tx/fx fast ethernet, ieee802.3x flow control, ieee802.1q vlan, ieee802.1p qos, ieee802.1d spanning tree Wavelength 850nm/1310nm/1550nm Transmission distance Single-fiber single-mode: 25/40/60/80/100km ; category-5 twisted pair: 100m Port One rj45 connector, connected to stp/utp category-5 twisted pair one fiber port: multi-mode - sc or st (fiber size: 50, 62.5/125µm) single mode - sc/fc fiber port (fiber size: 9/125µm) single-fiber single-mode - sc/fc fiber port (fiber size: 9/125µm) Conversion mode Medium conversion, storing and forwarding Mac address table I k Buffer space 1mbit Flow control Full duplex state: flow control; half duplex state: back pressure mode Delay 9.6us Bit error rate
The hco0101 is a component video(ypbpr) converter that allows Older analog devices to be integrated seamlessly into the modern Home theater. This adapter connects component video home Theater devices to hdmi compliant digital monitors. This adapter also takes digital audio and encodes It onto the hdmi signal for the full hdmi video and audio effect. With the component + digital audio to hdmi adapter legacy home Theater devices can be easily connected any Hdmi display for the full digital video and audio experience 4fªw x 1fªh x 4fªd
Membrane switch standard specification 1. Maximum circuit rating: 35vdc, 100ma, 1w 2. Contact resistance: 10 500 3. Insulation resistance: 100m at 100vdc 4. Dielectric withstand: 250rms (5060hz per min) 5. Contact bounce:
1. Maximum circuit rating: 35vdc, 100ma, 1w 2. Contact resistance: 10~ 500 ohm 3. Insulation resistance: 100m ohm at 100vdc 4. Dielectric withstand: 250rms (50~60hz per min) 5. Contact bounce:
1. Min. Trace width : 0.075mm 2. Min. Space between trace: 0.075mm 3. Min. Hole size: 0.25mm 4. Min thickness: A) single sided: 0.07mm B) double sided: 0.13mm 5. Dimension tolerance: A)+/-0.05mm (metal tooling) B)+/-0.10mm (cutting tooling) 6. Base materials: pi, pet 7. Conductor (copper thickness): 0.5oz., 10oz. And 20oz. (ra and ed copper) 8. Cover-layer: pi and pet (solder mask printing is available) 9. Adhesive material: epoxy, acrylic and polyester 10. Stiffener materials: fr-4, mylar and polyamide 11. Surface finishes: flash gold plating, selective gold plating and solder plating
Voip gateway Product characteristics: 1. Standard sip 2. 0 terminal product, powerful applicability, and best for global popularizing; support sip 2. 0, tcp / udp / ip, rtp / rtcp, icmp, arp / rarp, ntp, pppoe, tftp, http, etc; support g. 711 (alaw and u-law) , g. 723. 1 (5. 3k / 6. 3k) , g. 723 (40k / 32k / 24k / 16k) , g. 728, g. 729a / b, ilbc; 2. The powerful dsp digital audio processor to keep a wonderful audio-quality; inside dns, router, nat, dmz, the gateway and dhcp (the client end and the server end) ; jitter control adn packet loss concealment technology; 3. Support incoming call on show, restricting, and holding, disconnection, call transfer, call divert, dialing project, etc. Support conference call; 4. Supports vad, cng, agc, the echo eliminates (g. 168) and the static sound suppression; 5. Support layer 2 (802. 1q vlan, 802. 1p) and layer 3 (qos, , tos diffserv, mpls) 6. Powerful long-distance tftp or http manages; to dispose through the browser or the voice hint; 7. Nat automatic penetration; 8. Support passing through and t. 38 fax; 9. Good for the environment, according to the international electromagnetism radicalizations standard; 10. Select high quality material, original electrocircuit design, and no electric current noise, work steadily; 11. Porcelain and legerity design, let you feel the full-bodied appetency of the product besides expediency schlepping. Ata (sip2. 0) yes Router / bridge / dhcp yes Ethernet port 1wan / 1lan (rj45) Fxs 1fxs Fxo pstn pass-through Exit yes Weight 0. 38kg Active status temperature 0~40 Power source adapter ac in: 100v-240v dc out: + 9v / 600ma Use power:
Membrane switches Jasper has accumulated many years of membrane switch making experience, and most of our people have been in this business for more than five years. We maintains a work force of highly trained engineers who are able to quickly respond to customers differentiate demands for membrane keypad products. Characteristics: Light and slim, dust-proof, insulation, anti-shock and easy assemble. Applications: Medical device, industrial control, home electronics, and precise instrument industries etc. Membrane switch options There are a number of options within a membrane switch as described below Texturing Tactile devices Backlighting Rfi screening Surface mount devices Types we supply: Flat type Tactile feeling type W / metal dome Led-embedded Membrane circuit Metal dome arrays Export standard
Switch Our products are widely appliable to the fields covering main board telecommunication, broadcast television, automation equipment, software, interphone, lighting, relay, electric motor car with high performance.And the company has passed through iso9001quality authentication, ce and other international safety certification. Ic tube packing
Media converter Two 10/100m electrical ports, one single-mode or multi-mode optical port Multi-mode transmission distance: 2km, single-mode transmission distance: 120km, single-strand double-directions /double-strand double-directions. Set - in 1m cache, supporting 2k mac address self-learning and self-updating capability Supports forcible execution the cross of 10m, 100m, full-duplex, half-duplex, twisted-pair and automatically adapt to connect auto mdix function directly Supports rate control function and the rate can been controlled between nx64k (n=1~1600) to 100mbps Supports renovate system automatically function, support system regular refresh automatically via setting time, protect from system halted Supports management based on web, snmp, telnet or local console Supports lld(search disconnected link automatically), llr(return alarm message when disconnected link found) Supports llcf(report the disconnected alarm message to local network administration) Detect and control the operational states of electrical port and optical port of the near end and the far end via interface of management Supports open or close electrical and optical ports through via the far end network management Supports legal maximum packet size up to 1912 bytes, support cisco, isl and vtp Physical property: Input power: ac 100v~220v or dc 48v Dimension: 191mm x 110mm x 25mm Environment requirements: Operating temperature: 0¦-50¦ Storage temperature: -40¦-70¦ Environment humidity: 5-90%(non-condensing) Export carton with inner box
Artistic light switch This product breaks the traditional frame of the wall switches to be used the super large button. The front face is looked without outline border and just with the buttons. So you can be free to decorate your room to use this serial of switches by choosing different colors and patterns on the buttons.
Gve(e1, g.703 to v.35, v.24 converter) Gve(e1, g.703 to v.35, v.24 converter) Detailed selling lead description Features: 1) v-gve is an asic-based converter using one e1/g.703 to convert to v.35 2) can convert successive n x 64k (n=1-32) data stream into pcm signal of e1, the data rate is up to 2048kbps 3) placed in e1 frame, data user just needs necessary timeslot 4) setting timeslot is continuous and according to rate of data port 5) the data ports have v.35 and v.24/rs232c which are optional 6) the ports support external clock and become linking end line 7) v-gve satisfies the requirements of g.703, g.704&g.706 of itu 8) v-gve has local and remote loop backs. Therefore user can use circuitry-test and malfunction diagnose conveniently Detailed product description Features: 1) rate of data transition: n x 64kbps (n=1-31), 2, 048kbps 2) transmission mode: synchronization 3) line interface: impedance 75 ohm, physical interface bnc; impedance 120 ohm, physical interface rj45 4) transmission features: comply with g.703 5) clock: line; external 6) testing method: local analogy loopback, remote digital loopback 7) dce interface: v.35 or v.24/rs232c 8) power supply: 220v f+ 10%, 50hz; 48v dc (optional) 9) power consumption: 5w 10) volume (l x w x h): 225 x 145 x 40mm; 9" x 5.8" x 1.6" 11) temperature: 0 - 40fpc 12) humidity: 0~95%
Gve-tplus(e1/g.703 to v.35 ehernet converter GVE-Tplus(E1/G.703 to V.35 Ehernet converter Detaile Selling Lead Description Features: 1) GVE-T plus can convert E1 to both V.35 interface and LAN interface 2) Bandwidth of every port can be set into N x 64kbps (N=1-31) continuous data stream, although the total bandwidth of the two ports must be no more than 31 and must be inserted into PCM time slot of E1. It supports choices of CRC4 on/off and CAS/CCS (30 & 31 time slot) 3) GVE-T plus also can distribute the whole E1 capacity to V.35 data interface, although E1 must be framed N x 64kbps (N=1-31). The work mode can be either internal clock and slave-clock, or N x 64kbps (N=1-31) external clock to achieve end- linking line 4) GVE-T plus can be set up into long-range Ethernet Bridge from V.35 to LAN interface 5) GVE-T plus has two transmission modes to choose from: data and image 6) GVE-T plus has local and remote loop backs. Therefore user can use circuitry-test and malfunction diagnosis conveniently to perform port-to-port integrity test Detailed Product Description Ethernet features: 1) LAN table: 10,000 automatic learning and updating 2) Filtering and forwarding: 30,000 frames / second 3) Buffer size: 64M 4) Throughput delay: 1 frame 5) VLAN: comply with 802.1Q LAN feature: 1) Standard: conforms to IEE802.3 / Ethernet 2) Work mode: full duplex / half duplex 3) Data rate: 10Mbps 4) Physical interface: 10 BaseT (UTP), shielded RJ-45 5) WAN E1 / G.703 feature: 6) Line transmission rate: N 64Kbps (N=1-31) 2048Kbps 7) Line coding options: HDB3 8) Format of line frame: G.703 (framed / unframed) 9) Line interface: BNC; RJ45 Transmission features: 1) Comply with G.703 2) Rate of data transmission: N 64Kbps (N=1-31) 3) Transmission mode: synchronization 4) Data interface: V.35 or V.24 / RS232C DCE 5) Clock: master clock; slave clock; external clock 6) Testing methods: local analogy loopback test; remote digital loopback test Feature: 1) Power supply: 220VACf+10%, 50Hz 48V DC (optional) 2) Power consumption: 5W 3) Volume: 225 x 145 x 40mm; 9" (L) x 5.8" (W) x 1.6" (H) 4) Temperature: 0 - 40fpC
Ethernet switch Complies with ieee802. 3 10base-t, ieee802.3u 100base-tx. Store and forward 111function. Full or half duplex, Plug and play installation with automatic port configuration 24 10/100m self-negotiable rj-45 ports, auto-shift 10base-t and 100base-tx. Basic board width: 4.8 gbps, supply separate board width for each port to 111realize real bon-blocking transmission Store-and-forward Built-in 4m bit data buffer, supply full forwarding rate 19" standard rack-mounted size Power: 90-240vac·+50-60hz Operation temperature: 0 ~ 50 f¦ Store temperature: -20 ~125 f¦ Operation moisture: 10~90% Store moisture: 5~90% Size: 440*177*44 mm Weight: 3.5kg (with packing)
APT-103M22CC Optical media module 1.According with ieee802.3 ieee802.3u ieee802.3x Ieee802.1q 100base-tx 100base-tx 100base-fx standard. 2.Afford tcp/ip, pppoe, dhcp, icmp, nat protocol. 3.Flow control:full-duplex adopt ieee802.3x, half-duplex adopt backpressure standard. 4.Electric port support auto-negotiation function, autoconditioning transmit mode and transmit speed. 5.Port supply auto-mdi/mdix automatic reverse. 6.Support storage transmit mode. 7.Support electric port's 10m 100m mode and self-adapt mode to switch. 8.Afford the state indicator, external power(output 5v~50hz 1a) 9.Interface:electric port:rj-45 fiber port:sc 10.Twisted-pair:cat5 cat6 11.Multimode fiber: 50/125, 62.5/125um 12.Working temperature:0~50 degree 13.Storage temperature:-20~70 degree 14.Humidity:5%~90%(noncondensing) Connect type: sc Fiber type: multimode Wavelength: 1300nm Typical distance: 2km Min tx pwr: -19.0dbm Max tx pwr:-14.0dbm Sensitivity:-31.0dbm Link budget:12.0dbm
Technical parameter 1.Standards:ieee802.3u fast ethernet 10/100base-tx and 100base-fx 2.Connectors:(rj45-utp and fiber sc) 3.Led:power.Fdx/col, fx-link/act, txlink/act, fx100, tx100 4.Data tranfer mode: 10/100mbps 5.Duplex mode :full or half duplex mode 6.Power requirement:ac 100-260v dc1a +5v 7.Ambient temperature:0 - 70degree 8.Humidity:5% - 90%(noncondensing) 9.Dimenstons:26*71*97mm 10.Cable:cat.5 utp cable 11.Fiber: multi-mode Specification Connector type: sc Typical distance: 2km Fiber type: multi-mode Wavelength: 1300nm Min tx pwr: -19.0dbm Max tx pwr: -14.0dbm Sensitivity: 31.0dbm Link budget: 12.0dbm
Technical parameter 1.Standards:ieee802.3u fast ethernet 10/100base-tx and 100base-fx 2.Connectors:(rj45-utp and fiber sc) 3.Led:power.Fdx/col, fx-link/act, txlink/act, fx100.Tx100 4.Data tranfer mode: 10/100mbps 5.Duplex mode :full or half duplex mode 6.Power requirement:ac 100-260v dc1a +5v 7.Ambient temperature:0 - 70degree 8.Humidity:5% - 90%(noncondensing) 9.Dimenstons:26*71*97mm 10.Cable:cat.5 utp cable 11.Fiber: multi-mode Specification Connector type: sc Typical distance: 60km Fiber type: singlemode Wavelength: 1310nm Min tx pwr: -5.0dbm Max tx pwr: -1.0dbm Sensitivity: -35.0dbm Link budget: 29.0dbm
Pressure switch Specifications For use with fluorinated refrigerants as well as with a air and water.(allowable fluid temp.:-10f¦~+110f¦) Various contact functions available. With spdt contact mechanism. Renovated micro-switch structure ensures the reliable switch function. Manual-controlled and no use of other instruments to have a function test. Flexible mounting plate suits various kinds of application.
A DTWUH0301D B Multifunctional Home Theatre
XH-FSW-8-8 rack-mounted optical switch is a kind of functional device,with the ability of controlling and switching optical route. It can be manually selected from front panel or controlled via RS232 port, Ethernet port and auto-scanned on certain frequency. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system. Features: Low insertion loss, Fast switching SerialNet, High Reliability, High Stability LED display panel. Visual display, Convenient operation. Transparent transmission signal. High stability and reliability. Channel and time interval of automatic scanning can be set up. RS232 Control and Ethernet Remote Management Applications: FITL Automatic Measurement Optical Network Remote Monitoring Cable Monitoring and Maintaining system Specifications Parameters Unit Indicators Channel No. 8-8 Wavelength Range nm 1260~1650 Test Wavelength nm 1310/1550 Insertion Loss dB 2.5 dB Repeatability dB 0.04 Return Loss dB 50 Crosstalk dB 55 WDL dB 0.50 PDL dB 0.1 Optic Power mW 500 Fiber Type SM 9/125um Connector FC/APC Monitoring Port RJ45 RS-232 Working Power Supply Plug-type V AC:100ï½? 240 (50/60Hz) Power Consumption W 30 Operating Temperature -10 60 Size mm 4U:483 x 500 x 178
