Overview: Dhodt-eoc is a converter for stm-1 converter electrical and optical interface conversion. It is designed for the pdh equipment coaxial interface and optical interface interconnect. Dhodt-eoc is an interface converter for stm-1 electrical and optical interface conversion.It is designed for the sdh equipment coaxial interface and optical interface interconnect, as well as the atm 155.520 mbps interface and sdh device interconnection. Complete loopback facility is supported for system diagnostic and commissioning.Compact casing and simple operation achieve the cost saving and investment protected. Features: 1. High reliability, comply with itu-t g.703 and g.957 2. Single fiber bi-directional is selectable 3. State-of-the-art design, ensure normal working under different environment. 4. Supports local and remote loop-back on electrical or optical interface for system diagnostic. 5. Suitable for sdh and atm 155.52 mbps interface interconnection. 6. Simple operation and maintenance 7. Compact design and low power consumption. Specifications: Electrical interface Standard:itu-t g.703 compliant Data rate:155.52 mbps Line code:cmi Physical connector:bnc coaxial Optical interface Standard:itu-t g.957 stm-1 Bit rate:155.520 mbps Coding:nrz Connector:sc Light source:laser diode Wave length:1310nm (typical), or 1550nm (optional) or single Fiber bi-directional (optional) Transmit power:-12dbm (1310nm) / -5dbm (1550nm) Receive sensitive:-36dbm (1310nm) / -38dbm (1550nm) Power supply Ac 220v10%, 50hz Dc¡¡ìc48v (optional) Consumption:5w Environment Temperature:050 Humidity: 90% (non condensing) Dimension Wd(mm): 245 x 215 x50 Carton.
Overview: GVE-Tplus is E1 to V.35/V.24/RS232 and Ethernet Converter. Other series interface RS449/RS530/X.21 also can be optional. E1 port can support BNC/75ohm and RJ45/120ohm optional. This device provides an economical digital access solution for E1 and fractional E1 network services. With a adapter cable, the device can connect to other DTE device, such as router, at data rates of 64Kbps to 2048Kbps.User data is placed into the E1 frame, using only the required number of timeslots, timeslot assignment is accomplished according to the data port speed and manual setting of DIP switches. The V.35 or V.24/RS232 and Ethernet share the 2Mbps bandwidth, the total bandwidth of the 2 interfaces must be not more than 1984Kbps.GVE-Tplus is widely used in communication network, both in WAN and LAN connection field. Features: *Comply with ITU V.35, G.703, G.704, G.706, G.823 *Full comply with IEEE 802.3 /IEEE 802.1Q (VLAN) *Framed (N*64Kbps) and unframed (2.048Mbps) optional *Ethernet port 10Mbps, Full/Half Duplex mode compatible *Frame mode support PCM30/PCM31 *Support CRC4 *Support internal clock, E1 recovery clock or V.35 line clock *Provide analog and digital loopback and remote digital loopback test *For E1 interface, 75ohm (unbalanced) and 120ohm (balanced) optional *For data interface, V.35 and V.24/RS232 optional *Comprehensive LED indicators on front panel, convenient for the diagnosis of equipment working state *Stand-Alone and Rack-Mount available *16-slots, elaborate cooling design and two redundant power supplies *Support management *-48V DC & 220V AC power supply optional Specifications: E1 & FE1 interface Comply with ITU G.703,G.704,G.706,G.823 Rate:2.048Mbps;N*64Kbps(N=1~31) Code type:HDB3 Impedance:75ohm unbalanced & 120ohm balanced optional Physical interface:BNC coaxical for unbalanced RJ45 twisted pair for balanced Ethernet interface Comply with IEEE 802.3/IEEE 802.3Q(VLAN) Rate:10Mbps,Half/Full auto-negotiation MDI/MDI-X optional Physical interface:10 Base-T(UTP);RJ45 V.35,V.24/RS232 interface Comply with V.35,V.24/RS232 standard Rate:2048Kbps;N*64Kbps(N=1~31) Transmission mode:Synchronization Data interface:V.35 or V.24/RS232 Physical interface:DB25 female jack,V.35 via external adapter Work mode:DCE Power supply AC power:220V¡¨¤10%,50Hz DC power:-48V(optional) Power:5W Environment Temperature:0¡«40¡æ Humidity:0¡«95% RH Carton.
It can extend the power switch of the computer,keyboard,mouse and video port max of 5-50m It provides a KVM port on the Sender It can be switched from remote monitor to local monitor or switched from local monitor to remote monitor by the keystroke on the Sender or SCROLL on the local keyboard Use the single cable (CAT5,CAT5E,CAT6),the cost is inexpensive It supports (PS/2 port) keyboard and mouse, it supports (VGA) port monitor It can remove and insert the local and remote keyboard and mouse Power on computer use the emulational keyboard and mouse It supports DOS, Windows, Unix, Linux system It does not need a driver, it is simple to install The remote keyboard and mouse display is in real-time Index of anti-lightning and anti-invasion:withstand air-discharge 15KV, contiguity-discharge 8KV 110 x 110 x 30 (mm), 0.55kg
The on82v16da0101t/r series video transceiver support simultaneous broadcast quality transmission of 8-bit digitally encoded video, bi-directional data transmission over one singlemode(or multi-mode) optical fiber. The modules are universally compatible with major cctv camera manufactures and support rs-232, rs-422, and 2-wire or 4-wire rs-485 data interfaces and all major data protocols. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments.Each transceiver incorporates status indicating led¡¯s for monitoring of proper system operation. The modules are available in either stand-alone or rack mount versions. 2kg/pcs
The on82v08da0101t/r series video transceiver support simultaneous broadcast quality transmission of 8-bit digitally encoded video, bi-directional data transmission over one singlemode(or multi-mode) optical fiber. The modules are universally compatible with major cctv camera manufactures and support rs-232, rs-422, and 2-wire or 4-wire rs-485 data interfaces and all major data protocols. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments.Each transceiver incorporates status indicating leds for monitoring of proper system operation. The modules are available in either stand-alone or rack mount versions. 1.5kg/pcs
F3x23 serial industrial router is a kind of cellular terminal device that provides data transfer function by public network. It adopts high-powered industrial 32-bits cpu and embedded real time operating system. It supports rs232 (or rs485/rs422) and ethernet port that can conveniently and transparently connect one device to a cellular network, allowing you to connect to your existing serial and ethernet devices with only basic configuration. It has been widely used on m2m fields, such as intelligent transportation, smart grid, industrial automation, telemetry, finance, pos, water supply, environment protection, post, weather, and so on. Standard four-faith carton or neutral carton package
Product details Device type switch - 24 ports - managed Enclosure type rack-mountable - 1u Ports 24 x 10/100/1000 + 4 x sfp Power over ethernet (poe) poe Performance switching capacity : 176 gbps Forwarding performance (64-byte packet size) : 41.7 mpps Mac address table size 8k entries Ws-c2960s-24ts-s Ws-c2960s-24ts-l Ws-c2960s-24ps-l Ws-c2960s-24td-l Ws-c2960s-24pd-l Ws-c2960s-48ts-s Ws-c2960s-48ts-l Ws-c2960s-48td-l Ws-c2960s-48lps-l Ws-c2960s-48fps-l Ws-c2960s-48lpd-l Ws-c2960s-48fpd-l Ws-c2960-24-s Ws-c2960-8tc-l Ws-c2960-24tt-l Ws-c2960-24tc-s Ws-c2960-24tc-l Ws-c2960-24lc-s Ws-c2960-24pc-l Ws-c2960-24lt-l Ws-c2960-48tt-l Ws-c2960-48tc-s Ws-c2960-48tc-l Ws-c2960-48pst-s Ws-c2960-48pst-l Ws-c3560g-24ts-s Ws-c3560g-24ps-s Ws-c3560g-48ps-s Ws-c3560g-48ps-e Ws-c3560g-48ts-s Ws-c3560g-48ts-e Ws-c3750x-12s-s Ws-c3750x-12s-e Ws-c3750x-24s-s Ws-c3750x-24s-e Ws-c3750x-24t-s Ws-c3750x-24t-l Ws-c3750x-24p-l Ws-c3750x-24p-s Ws-c3750x-48t-s Ws-c3750x-48t-l Ws-c3750x-48p-l Ws-c3750x-48p-s Ws-c3750x-48pf-l Standard packing
Features of network cabinet: Material: spcc cold rolled steel Thickness: mounting rails: 2.0mm; others: 1.2mm Loading capacity: 600kgs Surface finish: degreasing, pickling, phosphoric, powder coated Color: black ral9004, gray ral7035, black ral7021 Standard: comply with ansi/eia rs-310-d, iec60297-2, din41494, part1, din41494, part7 standard Specifications of network cabinet: Front door: lockable glass door with strip vented door borde Rear door: lockable metal door Mounting profiles: width is up to 3.0cm to strengthen the loading capacity Mounting angles: special designed mounting angles to reinforce the frame Bottom: different designed bottom to strengthen the loading capacity Frame: special designed frame with cable management Strips colors: red/green/blue/black/grey colors are available Door open direction: could be changed without any extra kits. Accessories of cabinets: full set of optional accessories besides the standard accessories Packing: flat packing recommended, 2/3 space saved during delivery, 2 or 3 packages with recognizable shipping mark for easier management. Assembled packing is acceptable. Dimensions of network cabinet: Width: 600/800mm; Depth: 600/800/900/1000/1200mm; Capacity: 15/20/24/29/33/38/42u Carton boxes+packing belts+stretch films Pallets, veneer crates and packing foam is optional
Features of network cabinet: Material: spcc cold rolled steel Thickness: mounting rails: 2.0mm; others: 1.2mm Loading capacity: 600kgs Surface finish: degreasing, pickling, phosphoric, powder coated Color: black ral9004, gray ral7035, black ral7021 Standard: comply with ansi/eia rs-310-d, iec60297-2, din41494, part1, din41494, part7 standard Specifications of network cabinet: Front door: lockable glass door with metal door border Rear door: lockable metal door Mounting profiles: width is up to 3.0cm to strengthen the loading capacity Mounting angles: special designed mounting angles to reinforce the frame Bottom: different designed bottom to strengthen the loading capacity Frame: special designed frame with cable management Strips colors: red/green/blue/black/grey colors are available Door open direction change: could be changed without any extra kits. Accessories of cabinets: full set of optional accessories besides the standard accessories Packing: flat packing recommended, 2/3 space saved during delivery, 2 or 3 packages with recognizable shipping mark for easier management. Assembled packing is acceptable. Dimensions of network cabinet: Width: 600/800mm; Depth: 600/800/900/1000/1200mm; Capacity: 15/20/24/29/33/38/42u Carton boxes+packing belts+stretch films Pallets, veneer crates and packing foam is optional
Features of network cabinet: Material: spcc cold rolled steel Thickness: mounting rails: 2.0mm; others: 1.2mm Loading capacity: 600kgs Surface finish: degreasing, pickling, phosphoric, powder coated Color: black ral9004, gray ral7035, black ral7021 Standard: comply with ansi/eia rs-310-d, iec60297-2, din41494, part1, din41494, part7 standard Specifications of network cabinet: Front door: lockable glass door with dot vented door border Rear door: lockable perforated door Mounting profiles: width is up to 3.0cm to strengthen the loading capacity Mounting angles: special designed mounting angles to reinforce the frame Bottom: different designed bottom to strengthen the loading capacity Frame: special designed frame with cable management Strips colors: red/green/blue/black/grey colors are available Door open direction: could be changed without any extra kits. Accessories of cabinets: full set of optional accessories besides the standard accessories Packing: flat packing recommended, 2/3 space saved during delivery, 2 or 3 packages with recognizable shipping mark for easier management. Assembled packing is acceptable. Dimensions of network cabinet: Width: 600/800mm; Depth: 600/800/900/1000/1200mm; Capacity: 15/20/24/29/33/38/42u Carton boxes+packing belts+stretch films Pallets, veneer crates and packing foam is optional
Features of server cabinet: Material: spcc cold rolled steel Thickness: mounting rails: 2.0mm; others: 1.2mm Loading capacity: 600kgs Surface finish: degreasing, pickling, phosphoric, powder coated Color: black ral9004, gray ral7035, black ral7021 Standard: comply with ansi/eia rs-310-d, iec60297-2, din41494, part1, din41494, part7 standard Specifications of server cabinet: Front door: lockable arch mesh door Rear door: lockable mesh door Mounting profiles: width is up to 3.0cm to strengthen the loading capacity Mounting angles: special designed mounting angles to reinforce the frame Bottom: different designed bottom to strengthen the loading capacity Frame: special designed frame with cable management Strips colors: red/green/blue/black/grey colors are available Door open direction: could be changed without any extra kits. Accessories of cabinets: full set of optional accessories besides the standard accessories Packing: flat packing recommended, 2/3 space saved during delivery, 2 or 3 packages with recognizable shipping mark for easier management. Assembled packing is acceptable. Dimensions of server cabinet: Width: 600/800mm; Depth: 600/800/900/1000/1200mm; Capacity: 15/20/24/29/33/38/42u Carton boxes+packing belts+stretch films Pallets, veneer crates and packing foam is optional
Features of network cabinet: Material: SPCC Cold Rolled Steel Thickness: Mounting rails: 2.0mm; others: 1.2mm Loading Capacity: 600kgs Surface Finish: Degreasing, Pickling, Phosphoric, Powder coated Color: Black Ral9004, Gray Ral7035, Black Ral7021 Standard: Comply with ANSI/EIA RS-310-D, IEC60297-2, DIN41494, PART1,DIN41494, PART7 standard Specifications of network cabinet: Front Door: Lockable glass door with strip vented door border Rear Door: Lockable perforated door Mounting Profiles: Width is up to 3.0cm to strengthen the loading capacity Mounting Angles: Special designed mounting angles to reinforce the frame Bottom: Different designed bottom to strengthen the loading capacity Frame: Special designed frame with cable management Strips Colors: Red/green/blue/black/grey colors are available Door Open Direction Change: Could be changed without any extra kits. Accessories of Cabinets: Full set of optional accessories besides the standard accessories Packing: Flat packing recommended, 2/3 space saved during delivery, 2 or 3 packages with recognizable shipping mark for easier management. Assembled packing is acceptable. Dimensions of network cabinet: Width: 600/800mm; Depth: 600/800/900/1000/1200mm; Capacity: 15/20/24/29/33/38/42U Carton boxes+packing belts+stretch films Pallets, veneer crates and packing foam is optional
Specification Specification: 1.Specification: 4p+mylar+al+b 2.Rated temperature: 60¡ãc or 75¡ãc 3.Unshielded twisted pairs: 4.Conductor: 26awg or 24awg stranding or solid bare copper 5.Insulation: hd-pe 6.Inner shielded: al-mylar 100%(min) coverage 7.Outer shielded:tinned copper or al-mg braid 45%(min) coverage 8.Unrip rope:optional 9.Jacket: pvc or lsnh 10.Impedance:100¡à15%¦¸ at 1~100 mhz 11.Reference standard: yd/t1019-2001, iso/iec11801, ansi/tia/eia-568b, ul 444 12.Print legend: cm or cmr Features 1. Solid copper conductor allows high speed of signal transmission 2.Fast and reliable connection 3.Twisted pairs with bright color for easy recognition 4.Ripcord and footmark for convenient use 5.Smooth jacket for easy pulling in tight space 6.Color in light grey, dark grey, blue, white or as per your requirement Application 1.Computer network cabling project 2.Broadband network communication 3.Digital isdn network and atm 155mbps network 4.Ethernet network 5.Audio and data transimission Packing: 1) packing length: 100m/roll, 200m/roll, 305m/roll, 100yard/roll, 200yard/roll, 300yard/roll. 2) inner packing: wooden reel, plastic reel. 3) outer packing: carton box, pull out box, pallet available. 4) other packing available according to client's request. Port: shenzhen Minimum order quantity: 99 roll/rolls Supply ability: 50000 roll/rolls per day Payment terms: l/c, t/t
Gc864-v2 The v2 family is the new generation of telit modules which offers most of the features of the previous versions plus a gsm/gprs protocol stack 3gpp release 4, the downlink advance receiver performance (darp) feature for single antenna interference cancellation (saic), the enhanced measurement report, geran feature package 1, which assists in supporting the extended uplink tbf and network assisted cell change (nacc), the control via remote at commands and event monitor. 30x36x3 mm
Sim908 module General features •quad-band 850/900/18001900mhz •gprs multi-slot class 10 •gprs mobile station class b •compliant to gsm phase 2/2+ - class 4 (2 w @ 850/900 mhz) - class 1 (1 w @ 1800/1900mhz) •control via at commands (gsm 07.07 , 07.05 and simcom enhanced at commands) •sim application toolkit •supply voltage range: -gprs: 3.2 ~ 4.8 v -gps: 3.0 ~ 4.5v •low power consumption •dimensions: 30*30*3.2mm •weight: - sim908:5.2g - sim908-c:11.1g •operation temperature: -40 °c to +85 °c Specifications for sms via gsm / gprs •point-to-point mo and mt •sms cell broadcast •text and pdu mode Specifications for audio •tricodec - half rate (hr) - full rate (fr) - enhanced full rate (efr) •hands-free operation •echo cancellation Specifications for data transfer •gprs class 8/10: max. 85.6 kbps (downlink) •pbcch support •coding schemes cs 1, 2, 3, 4 •csd up to 14.4 kbps •ussd •non transparent mode •ppp-stack •integrated tcp/ip stack Compatibility •at cellular command interface Specification for gps •receiver type - 42-channel - gps l1 c/a code, - high-performance ste engine •sensitivity - tracking: -160 dbm - cold starts : -143 dbm •time-to-first-fix - cold starts: 30s (typ.) - hot starts: 1s (typ.) Dimensions: 30*30*3.2mm
The speed from 622M to 4.5G Suit to Switchs,Fiber Channel, High speed ball machine Antistatic Bag and box
6es7 321-7bh01-0ab0 simatic s7-300, digital input Sm 321, galvanically isolated, 16 di, dc 24v, 1 x 20 pin, Process interrupt, diagnostics, Fit for isochrone mode siemens 6es7 322-5gh00-0ab0 simatic s7-300, digital output Sm 322, optically isolated, 16 da (solid state relay), Ac/dc 24 - 48v; 0.5a; 1.5a surge current, one channel Per common, 1 x 40 pin siemens 6es7 331-7kf02-0ab0 simatic s7-300, analog input Sm 331, optically isolated, 8ai, resolution 9/12/14 bits, U/i/thermocouple/resistance Interrupt, diagnostics; 1x20pin Remove/insert w. Backplane bus siemens 6es7 332-5hf00-0ab0 simatic s7-300, analog output sm 332, optically isolated 8 ao, u/i; diagnostics; resolution 11/12 bits, 40 pin remove/insert w. Active backplane bus siemens Packaging detail: 100% original new Delivery detail: in stock
• 48 ethernet 10/100/1000 ports • 4 sfp-based gigabit ethernet ports • 32-gbps, high-speed stacking bus • innovative stacking technology • 1 ru stackable, multilayer switch • enterprise-class intelligent services delivered to the network edge • ip services software feature set (ips) • provides full ipv6 dynamic routing
CISCO WS-C3750G-48TS-S
Cisco catalyst 3750 12 sfp standard multilayer image.
