The on82v16da0101t/r series video transceiver support simultaneous broadcast quality transmission of 8-bit digitally encoded video, bi-directional data transmission over one singlemode(or multi-mode) optical fiber. The modules are universally compatible with major cctv camera manufactures and support rs-232, rs-422, and 2-wire or 4-wire rs-485 data interfaces and all major data protocols. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments.Each transceiver incorporates status indicating led¡¯s for monitoring of proper system operation. The modules are available in either stand-alone or rack mount versions. 2kg/pcs
The on82v08da0101t/r series video transceiver support simultaneous broadcast quality transmission of 8-bit digitally encoded video, bi-directional data transmission over one singlemode(or multi-mode) optical fiber. The modules are universally compatible with major cctv camera manufactures and support rs-232, rs-422, and 2-wire or 4-wire rs-485 data interfaces and all major data protocols. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments.Each transceiver incorporates status indicating leds for monitoring of proper system operation. The modules are available in either stand-alone or rack mount versions. 1.5kg/pcs
Supplier: Lcd monitors, lcd monitor panels, laptops, t shirts, shirts, polo shirts
1xn plc splitter, smf-28e 0.25mm bare fiber, stainless steel body and box (dimension depends the mode), 1260~1650nm, pigtail and adaptor (sc/apc or fc/apc) are available. Features: 1. Environmentally stable. 2. Easy installation. 3. Low insertion loss. 4. High uniformity. 5. High reliability. Application: 1. Network protection 2. Monitoring 3. Access/pon distribution 4. Catv 5. Ftth Optional
Optic network unit 4 rj45 ports, 2 voip ports, 1 optical port for gepon, sm, single fiber, 20km, 10/100base-t, max split: 32, wavelength, 1490r/1310t, cli management, rs232 console for debug and cli/telnet, external power, ac220v/dc-12v, 220(w)*136(d)*32(h)mm. Features: 1.Full ieee 802.3/802.3ah compliance 2.Highest speed pon: 1 gbit/s symmetrical for data, voip or ip video services 3.Plug-and-play+/-via auto-discovery and configuration 4.Advanced qos functions enable billing by service level agreement 5.Remote management with advanced oam functions 6.Igmp snooping 7.Reduction of video pon onu cost with combination an onu transceiver 8.Low input optical power Application: 1.Lan 2.Fttx 3.Catv Optional
Supplier: Used mobile phone, used laptop, note book, ipad, pad, consumer electronics, speaker, headset. used cell phone
Services: International trade, wholesale, direct factory connecting, forwarding
Buyer: Used mobile phone, used laptop, note book, ipad, pad, consumer electronics, speaker, headset. used cell phone
Introduction Cybervision CGE series 3G-SDI+ Data Optical Transceiver consists of optical transmitter CGET and optical receiver CEGR, which can realize mixture transmission for profession video and standard data interface for one channel 3GSDI, dual channels 10/100m Ethernet signal and multi-channels RS485/RS422, the SDI supports the HD signal with bit rate 3Gb/s, 1.5Gb/s, and compatible with SD-SDI or ASI video signal. With multiple bit-rates cable equalizer at electric input of CGET, and built in distribution amplifier at CGER, it can output dual channels HD-SDI (main and standby). With incomparable accuracy, and the electro circuit which can reduce the signal jitter, the equipment can deal with distorted signal well, it can provide 100m automatic balance for 1485 Mbps, 250m for 270 Mbps. Features: 1. Meets all video standard of SMPTE 424M, support the 3G SDI video format with bit rate of 2.97 Gb/s or 2.97/1.001 Gb/s 2. Meets all video standard of SMPE 292M, support the HDSDI video format with bit rate of 1.485 Gb/s or 1.485/1.001 Gb/s 3. Meets all video standard of SMPTE 259M, support the SD-SDI video format with bit rate of 270 Mb/s 4. Meets the interface standard of DVB-ASI (270 Mb/s) and SMPTE 305M (SDTi) 5. Passed the test of SDI pathology 6. With automatically identifying SD/HD/3G bit rate, the identifying scale: 270Mb/s ~ 2.97Gb/s 7. With automatic equalizer at SDI input port, the input of 270 Mb/s can be up to 400m, 1.485Gb/s can be up to 140m, 2.97 Gb/s can be up to 120m (the testing cable is Belden 1694A) 8. Support two channels 10/100m Ethernet interface, the two ports have switching function 9. Support 4 channels RS485 or 2 channels RS422, every channel is independent. 10. The optic signal is 3 wavelength CWDM signal, the wavelength can be customized, the transmission distance can be up to 100KM.
Product Description E1 modem is called single of E1 PDH , which can connect the data one port E1 or one port RS232 to the optical interface . the equipment is wildly used in the mobile phone net station. and FTTH interface parameters the VIP optical insert . Technology Characteristics -> Realized one E1 transmitting over fiber in transparent mode -> Allow the equipment to interoperate over V.35 fiber modem and ethenet fiber modem -> Relaize one RS232 data transmitting in optical fiber line with 4800bps rate -> Have a loop setting function and easy to open and test -> Enable to manage networks and supervise equipment running and settings -> Provide unbalanced 75ª+ and balanced 120ª+ E1 interfaces E1 Interface: -> Support ITU-T G.703íóG.704 -> HDB3 line coding, comply indication output of route warn -> Coding rate : 2048Kbpsí+50ppm -> 75ª+ physics interface use BNC standard coaxial connector, 120ª+ physics interface use RJ45 connector Optical Interface: -> Rate : 4.096Mbpsí+50ppm -> Wavelength : 1310nm -> Power of optical signal output: ¿C2~-11dBm -> Receipt sensitivity : better than ¿C36dBm -> Interface : FC -> Interface mode :DCE General characteristics -> Power : 220Ví+20% , -36 ~ -72V -> Power Consumption : < 5W -> Environment Temperature : 0íµ-50íµ -> Size : 220í-165í-35mm -> Net Weight : 900g Packing List -> E1 Optical Modem -> One Power cord (Note : -48v no with power cord) -> Two BNCs Coaxial Connector -> Manual book
Product Description 4/8E PDH is developed based on the VLSI chips. Relying on the advanced multiplexing technique, 4/8E PDH realizes 4/8 E1 and 100Mb/s fast Ethernet transmission with the function of Auto-Laser-Shutdown (ALS,optional). Technology Characteristics -> Transmits 4/8 E1 and one wire speed Ethernet -> Line bit rate is 150Mb/s -> Complies with ITU-T G.703 on interface and G.742, G.823 on jitter performance -> Complies with ITU-T G.802.3 on Ethernet interface and supports auto-negotiation for 10M/100M and half/full duplex working mode -> Supports VLAN and pause follow control for Ethernet -> All necessary alarm functions, supervises the status of remote terminal -> Supports E1 tributaries loop back for network fault diagnostics -> Supplies standard order wire telephone -> Supplies one customer RS232 data channel -> Supplies RS232 for equipment management -> AC 220 or DC-48 is optional -> Single board design, 1U, and 19 Inch standard Optical interface: -> Transmit Mode : Single/ Multi-mode -> Module : Single/Double Fiber -> Interface : FC/SC/ST -> Wavelength : 1310nm/1550nm -> Distance : 2Km/40Km/60Km/120Km E1 interface: -> Bit rate : 2.048Mb/s , í+50ppm -> Impedance : 75ª+ unbalanced(Declaration is needed if 120ª+ balanced required) -> Coding: HDB3, according to ITU-T G.703 -> Jitter: complies with ITU-T G.823 and G.742. Seeing appendix Ethernet interface: -> 10M/100M through auto-negotiation -> Full/Half duplex through auto-negotiation -> Connector: RJ-45 -> See appendix for Throughput, Packing error rat, Delay, and others Order wire interface: -> Phone set: Standard 2-wire phone set -> Bandwidth: 64Kb/s -> Coding: PCM RS232 for management: -> Bit rate: 9600b/s -> Data width: 8bits -> Stop bit: 1bit -> Parity check bit: None -> Connector: DB9 (pin) RS232 for customer data channel: -> Bit rate: í_250kb/s -> Connector: DB9(pin) General characteristics -> Power : 220Ví+20% , -36 ~ -72V -> Power Consumption : < 5W -> Environment Temperature : 0íµ-50íµ -> Size : 483í-200í-44mm -> Net Weight : 2.5Kg
