GVE-Tplus is E1 to V.35/V.24/RS232 and Ethernet Converter. Other series interface RS449/RS530/X.21 also can be optional. E1 port can support BNC/75ohm and RJ45/120ohm optional.
This device provides an economical digital access solution for E1 and fractional E1 network services. With a adapter cable, the device can connect to other DTE device, such as router, at data rates of 64Kbps to 2048Kbps.User data is placed into the E1 frame, using only the required number of timeslots, timeslot assignment is accomplished according to the data port speed and manual setting of DIP switches. The V.35 or V.24/RS232 and Ethernet share the 2Mbps bandwidth, the total bandwidth of the 2 interfaces must be not more than 1984Kbps.GVE-Tplus is widely used in communication network, both in WAN and LAN connection field.
Features:
*Comply with ITU V.35, G.703, G.704, G.706, G.823
*Full comply with IEEE 802.3 /IEEE 802.1Q (VLAN)
*Framed (N*64Kbps) and unframed (2.048Mbps) optional
*Ethernet port 10Mbps, Full/Half Duplex mode compatible
*Frame mode support PCM30/PCM31
*Support CRC4
*Support internal clock, E1 recovery clock or V.35 line clock
*Provide analog and digital loopback and remote digital loopback test
*For E1 interface, 75ohm (unbalanced) and 120ohm (balanced) optional
*For data interface, V.35 and V.24/RS232 optional
*Comprehensive LED indicators on front panel, convenient for the diagnosis of equipment working state
*Stand-Alone and Rack-Mount available
*16-slots, elaborate cooling design and two redundant power supplies
*Support management
*-48V DC & 220V AC power supply optional
Specifications:
E1 & FE1 interface
Comply with ITU G.703,G.704,G.706,G.823
Rate:2.048Mbps;N*64Kbps(N=1~31)
Code type:HDB3
Impedance:75ohm unbalanced & 120ohm balanced optional
Physical interface:BNC coaxical for unbalanced
RJ45 twisted pair for balanced
V.35,V.24/RS232 interface
Comply with V.35,V.24/RS232 standard
Rate:2048Kbps;N*64Kbps(N=1~31)
Transmission mode:Synchronization
Data interface:V.35 or V.24/RS232
Physical interface:DB25 female jack,V.35 via external adapter
Work mode:DCE
Power supply
AC power:220V¡¨¤10%,50Hz
DC power:-48V(optional)
Power:5W
It can extend the power switch of the computer,keyboard,mouse and video port max of 5-50m
It provides a KVM port on the Sender
It can be switched from remote monitor to local monitor or switched from local monitor to remote monitor by the keystroke on the Sender or SCROLL on the local keyboard
Use the single cable (CAT5,CAT5E,CAT6),the cost is inexpensive
It supports (PS/2 port) keyboard and mouse, it supports (VGA) port monitor
It can remove and insert the local and remote keyboard and mouse
Power on computer use the emulational keyboard and mouse
It supports DOS, Windows, Unix, Linux system
It does not need a driver, it is simple to install
The remote keyboard and mouse display is in real-time
Index of anti-lightning and anti-invasion:withstand air-discharge 15KV, contiguity-discharge 8KV
The on82v16da0101t/r series video transceiver support simultaneous broadcast quality transmission of 8-bit digitally encoded video, bi-directional data transmission over one singlemode(or multi-mode) optical fiber. The modules are universally compatible with major cctv camera manufactures and support rs-232, rs-422, and 2-wire or 4-wire rs-485 data interfaces and all major data protocols. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments.Each transceiver incorporates status indicating led¡¯s for monitoring of proper system operation. The modules are available in either stand-alone or rack mount versions.
The on82v08da0101t/r series video transceiver support simultaneous broadcast quality transmission of 8-bit digitally encoded video, bi-directional data transmission over one singlemode(or multi-mode) optical fiber. The modules are universally compatible with major cctv camera manufactures and support rs-232, rs-422, and 2-wire or 4-wire rs-485 data interfaces and all major data protocols. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments.Each transceiver incorporates status indicating leds for monitoring of proper system operation. The modules are available in either stand-alone or rack mount versions.
F3x23 serial industrial router is a kind of cellular terminal device that provides data transfer function by public network.
It adopts high-powered industrial 32-bits cpu and embedded real time operating system. It supports rs232 (or rs485/rs422) and ethernet port that can conveniently and transparently connect one device to a cellular network, allowing you to connect to your existing serial and ethernet devices with only basic configuration.
It has been widely used on m2m fields, such as intelligent transportation, smart grid, industrial automation, telemetry, finance, pos, water supply, environment protection, post, weather, and so on.
Standard four-faith carton or neutral carton package
12100 Computer Hardware Peripherals Suppliers
Short on time? Let Computer Hardware Peripherals sellers contact you.
Standard: comply with ansi/eia rs-310-d, iec60297-2, din41494, part1, din41494, part7 standard
Specifications of network cabinet:
Front door: lockable glass door with strip vented door borde
Rear door: lockable metal door
Mounting profiles: width is up to 3.0cm to strengthen the loading capacity
Mounting angles: special designed mounting angles to reinforce the frame
Bottom: different designed bottom to strengthen the loading capacity
Frame: special designed frame with cable management
Strips colors: red/green/blue/black/grey colors are available
Door open direction: could be changed without any extra kits.
Accessories of cabinets: full set of optional accessories besides the standard accessories
Packing: flat packing recommended, 2/3 space saved during delivery, 2 or 3 packages with recognizable shipping mark for easier management. Assembled packing is acceptable.
Dimensions of network cabinet:
Width: 600/800mm;
Depth: 600/800/900/1000/1200mm;
Capacity: 15/20/24/29/33/38/42u
Carton boxes+packing belts+stretch films
Pallets, veneer crates and packing foam is optional
Standard: comply with ansi/eia rs-310-d, iec60297-2, din41494, part1, din41494, part7 standard
Specifications of network cabinet:
Front door: lockable glass door with metal door border
Rear door: lockable metal door
Mounting profiles: width is up to 3.0cm to strengthen the loading capacity
Mounting angles: special designed mounting angles to reinforce the frame
Bottom: different designed bottom to strengthen the loading capacity
Frame: special designed frame with cable management
Strips colors: red/green/blue/black/grey colors are available
Door open direction change: could be changed without any extra kits.
Accessories of cabinets: full set of optional accessories besides the standard accessories
Packing: flat packing recommended, 2/3 space saved during delivery, 2 or 3 packages with recognizable shipping mark for easier management. Assembled packing is acceptable.
Dimensions of network cabinet:
Width: 600/800mm;
Depth: 600/800/900/1000/1200mm;
Capacity: 15/20/24/29/33/38/42u
Carton boxes+packing belts+stretch films
Pallets, veneer crates and packing foam is optional
Standard: comply with ansi/eia rs-310-d, iec60297-2, din41494, part1, din41494, part7 standard
Specifications of network cabinet:
Front door: lockable glass door with dot vented door border
Rear door: lockable perforated door
Mounting profiles: width is up to 3.0cm to strengthen the loading capacity
Mounting angles: special designed mounting angles to reinforce the frame
Bottom: different designed bottom to strengthen the loading capacity
Frame: special designed frame with cable management
Strips colors: red/green/blue/black/grey colors are available
Door open direction: could be changed without any extra kits.
Accessories of cabinets: full set of optional accessories besides the standard accessories
Packing: flat packing recommended, 2/3 space saved during delivery, 2 or 3 packages with recognizable shipping mark for easier management. Assembled packing is acceptable.
Dimensions of network cabinet:
Standard: comply with ansi/eia rs-310-d, iec60297-2, din41494, part1, din41494, part7 standard
Specifications of server cabinet:
Front door: lockable arch mesh door
Rear door: lockable mesh door
Mounting profiles: width is up to 3.0cm to strengthen the loading capacity
Mounting angles: special designed mounting angles to reinforce the frame
Bottom: different designed bottom to strengthen the loading capacity
Frame: special designed frame with cable management
Strips colors: red/green/blue/black/grey colors are available
Door open direction: could be changed without any extra kits.
Accessories of cabinets: full set of optional accessories besides the standard accessories
Packing: flat packing recommended, 2/3 space saved during delivery, 2 or 3 packages with recognizable shipping mark for easier management. Assembled packing is acceptable.
Dimensions of server cabinet:
Width: 600/800mm;
Depth: 600/800/900/1000/1200mm;
Capacity: 15/20/24/29/33/38/42u
Carton boxes+packing belts+stretch films
Pallets, veneer crates and packing foam is optional
Standard: Comply with ANSI/EIA RS-310-D, IEC60297-2, DIN41494, PART1,DIN41494, PART7 standard
Specifications of network cabinet:
Front Door: Lockable glass door with strip vented door border
Rear Door: Lockable perforated door
Mounting Profiles: Width is up to 3.0cm to strengthen the loading capacity
Mounting Angles: Special designed mounting angles to reinforce the frame
Bottom: Different designed bottom to strengthen the loading capacity
Frame: Special designed frame with cable management
Strips Colors: Red/green/blue/black/grey colors are available
Door Open Direction Change: Could be changed without any extra kits.
Accessories of Cabinets: Full set of optional accessories besides the standard accessories
Packing: Flat packing recommended, 2/3 space saved during delivery, 2 or 3 packages with recognizable shipping mark for easier management. Assembled packing is acceptable.
Dimensions of network cabinet:
Width: 600/800mm;
Depth: 600/800/900/1000/1200mm;
Capacity: 15/20/24/29/33/38/42U Carton boxes+packing belts+stretch films
Pallets, veneer crates and packing foam is optional
Gc864-v2
The v2 family is the new generation of telit modules which offers most of the features of the previous versions plus a gsm/gprs protocol stack 3gpp release 4, the downlink advance receiver performance (darp) feature for single antenna interference cancellation (saic), the enhanced measurement report, geran feature package 1, which assists in supporting the extended uplink tbf and network assisted cell change (nacc), the control via remote at commands and event monitor.
6es7 321-7bh01-0ab0 simatic s7-300, digital input
Sm 321, galvanically isolated,
16 di, dc 24v, 1 x 20 pin,
Process interrupt, diagnostics,
Fit for isochrone mode siemens
6es7 322-5gh00-0ab0 simatic s7-300, digital output
Sm 322, optically isolated,
16 da (solid state relay),
Ac/dc 24 - 48v; 0.5a;
1.5a surge current, one channel
Per common, 1 x 40 pin siemens
6es7 331-7kf02-0ab0 simatic s7-300, analog input
Sm 331, optically isolated,
8ai, resolution 9/12/14 bits,
U/i/thermocouple/resistance
Interrupt, diagnostics; 1x20pin
Remove/insert w. Backplane bus siemens
6es7 332-5hf00-0ab0 simatic s7-300, analog output sm 332, optically isolated 8 ao, u/i; diagnostics; resolution 11/12 bits, 40 pin remove/insert w. Active backplane bus siemens
Packaging detail: 100% original new
Delivery detail: in stock
