The series of products are made of saturated carboxylpolyester resin, TGIC or HAA, rutile titanium dioxide ,which are the main raw materials.They have good UV resistance and play a good protection and decorative properties for the application of outdoor metal workpiece surface.
Everflon FEP Aqueous Dispersion Everflon FEP D50 is an off-white aqueous fluorinated ethylene propylene (FEP) dispersion stabilized with a non-ionic surfactant. It is a general-purpose dispersion that can be used to impart some the unique properties of FEP to end products that would be difficult to make using traditional melt extrusion processes. It can be used to coat or impregnate porous structures, or to make thin films. It can be coated and melt bonded to polytetrafluoroethylene (PTFE) resin or used as a hot melt adhesive. The FEP resin in Everflon FEP D50 is a melt flowable thermoplastic, providing superior properties typical of fluoroplastic resins: retention of properties after service at 204 °C (400 °F) and useful properties at 240 °C (400 °F). Everflon FEP D50 aqueous dispersion provides: Inertness to nearly all industrial chemicals and solvents Stability at high temperatures Excellent dielectric properties Excellent weatherability Application Heat-sealable top coatings for PTFE-coated fabrics for belting, circuit boards, architectural fabrics, and electrical insulation Cast film for capacitor dielectrics or chemical barriers Hot melt adhesive for PTFE, PFA, and FEP parts Metal coatings Processing Conventional dip or flow techniques can be used for coating or impregnating high temperature fabrics, fibers, and other products with Everflon FEP D50. A FEP resin coating on woven fabrics made of fiberglass, fiber, or other high-temperature resistant fibers, can be made by dip coating. Successive passes may be necessary to build the desired thickness to produce a smooth, crack-free coating. Each coating layer is usually dried to remove water (typically at 120 °C [250°F]), baked to remove the wetting agent (typically at 270 °C [518 °F]), and then heated above the crystalline melting point of the resin particles (approximately 265 °C [509 °F]). If the Everflon FEP D50 is being used as a top coat over a PTFE-coated fabric or other parts, the coating must be heated to melt the PTFE (approximately 337 °C [639 °F]) to maximize adhesion. Other solid or liquid ingredients can be added to Everflon FEP D50 to provide specific processing or finished product behavior
Type:UV Gel Brand Name:LADISGEL Model Number:rubber top coat Place of Origin:Guangdong, China Certificate:SGS GMPC ISO MSDS Color:Clear MOQ:12pcs Volume:10 ml/bottle Smell:Odorless Soak off:EasilyLasting time: 3-4 weeksService:Sample+OEM Application:Lady's Nail Beauty Cure time:LED Lamp 30s UVLamp 2mins
Chlorosulfonation Polyethylene Anticorrosive Finish Chlorosulfonated polyethylene anticorrosive paint is formulated with chlorosulfonated polyethylene resin, anti-corrosive and antirust pigments, fillers and additives. It has primer, intermediate paint and finish paint. The product is chemically inert, has good resistance to the atmosphere, moisture, salt, alkali, acids, oxidants and petroleum, has excellent outdoor weather resistance, and the coating film is tough and has excellent wear resistance. No need to remove the stubborn old coating during maintenance. This product is mainly used in petrochemical equipment, pipelines and other facilities that are corroded by the chemical atmosphere. It can also be used in storage tanks and other chemical equipment that are corroded by acid, alkali, and salt, and in facilities that require waterproofing such as reservoirs, water tanks, and sewage pools. Advantages OF Chlorosulfonation Polyethylene Anticorrosive Finish Excellent corrosion and weather resistance Good adhesion to all types of metal and cement Excellent water resistance Good acid, alkali and chemical resistance Specification of Chlorosulfonation Polyethylene Anticorrosive Finish Type Solvent Solid Content 41% Mixing Ratio two components Part A: Part B=10:1 by weight Dry Film Thickness 30m per coat Specific Gravity 1.16kg/Liter Coverage Rate (Theoretical) 0.11kg/m2/30m 0.104L/m2/30m Drying Time Temperature 5 10 20 30 Dry to touch 40mins 30mins 20mins Dry Hard 6hrs 5hrs 4hrs Package 22kgs for one kit, part A 20kgs, part B 2kgs What is chlorosulfonated polyethylene coating? The chlorosulfonated polyethylene antifouling coating has excellent chemical resistance and acid and alkali resistance. Its old paint film can be dissolved by the solvent in the new paint film. Therefore, it is not necessary to remove the stubborn old paint film during maintenance, which reduces the maintenance cost. It is commonly used in anti-corrosion in pharmaceutical and chemical plants. As a paints factory, we will do our best to meet all the needs of customers.
Powder coating, warehouse shelf, powder coating powder.
Powder coatings.Manufacturer
Hydrophilic coating.
Coatings.
Powder Coatings.
Coating Equipment.
Powder coatings.
Non stick coating.
Coatings.
Nano coating materials for thermal insulation and uv protection, nano particles and nano powders.
All kinds of waterproof membrane, such as macromolecule sheet series (PVC roof membrane, tpo roof membrane), modified bituminous waterproof membrane, sealing, waterproof and drainage series, self-adhesive membrane series, and coatings.
Coating raw materials.
Thermoplastic powder coating powder coating, food can coating .
Powder coating.Produce, trade, technical service
Coating powder.
