All watertight doors are available in aluminum, steel, stainless steel or a combination of these metals
Meet IMO, SOLAS requirements
Normal pump unit can be separately installed beside the door or other position.
Application: used for engine&steering gear rooms with watertight bulkhead
Type: Integrated / Normal
Option: A0 / A60 Class Fireproof
Material: steel/aluminum
Max. Pressure:0.1Mpa
Available certificates: GL, DNV, CCS, BV, ABS, LR, KR, RS, etc.
Available in natural finish, primed or coated in accordance with client request.
Sizes and colors will customize according to your requirements.
Steel door meet SOLAS ,ISO 9001-2008
Application: apply for various kinds of access to storage and working spaces on vessels
Optional: mitered/radius corner, round/square/rectangular window, wheel-operated
Available certificates: GL, DNV, CCS, BV, ABS, LR, KR, RS, etc.
Their high torque transmission capacity covers a speed range from 360 to 1800 rpm depending on size and reduction and a torque power speed(N/n1) capacity from 0.38 up to 46.2 for reduction from 2 up to 6: 1.
The design family has six different modesl, four reverse reduction gears and two reduction gears without reversing function-each divided into eleven size. The relative configuration of input and output shaft is eighter coaxial or offset, the latter eigher vertically, horizontally or diagonally. The modular design affords a variety of advantages including low-cost-manufacture and spare stocking.
Marine gears of the design type GCS and GCH are single stage reduction gears with case hardened and ground single helical spur wheels. GCS type gears are of vertical offset design. GCH gears have horizontal offset shafts.
The sizes GCS/GCH 450 to 560 are equipped with antifriction bearings. The sizes GCS/GCH 600 to 1000 are equipped with plain bearings.
All gears can be equipped with a power take off (PTO) for which special superposition gears have been developed.
46 Marine Equipments Spare Parts Suppliers
Short on time? Let Marine Equipments Spare Parts sellers contact you.
Marine Double Bollard
1) Material: Cast Steel (ZG230-450), Q235
Also we can supply other kinds of bollards like Single Bollard, Cross Bollard, Inclined Bollard , etc
2) Paint: Surface Epoxy Primer
3) Certificate: CCS, ABS, BV, etc
With good quality and low price.
The anchor is an equipment used when vessel is approaching to port or harbor. The anchor is tied on the iron line on board and put into the seawater to help the vessel in stability and security.
Various kinds of anchor are sold, such as marine anchors, Hall anchor, Foldable Anchor, mushroom anchor, triangle anchor, admiralty Anchor, Speke anchor, HHP stockless anchor, Danforth anchor, etc.
Specification of Anchor
- Stainless steel
-High corrosion-resistance.
-Very effective under a wide variety of sea bed, tide and wind combinations.
-Sets and re-sets fast and easily.
-High holding power.
Application of Anchor
The anchor is an equipment used when vessel is approaching to port or harbor. The anchor is tied on the iron line on board and put into the seawater to help the vessel in stability and security.
Various kinds of anchor are sold, such as marine anchors, Hall anchor, Foldable Anchor, mushroom anchor, triangle anchor, admiralty Anchor, Speke anchor, HHP stockless anchor, Danforth anchor, etc.
Specification of Anchor
- Stainless steel
-High corrosion-resistance.
-Very effective under a wide variety of sea bed, tide and wind combinations.
-Sets and re-sets fast and easily.
-High holding power.
Application of Anchor
The anchor is an equipment used when vessel is approaching to port or harbor. The anchor is tied on the iron line on board and put into the seawater to help the vessel in stability and security.
Various kinds of anchor are sold, such as marine anchors, Hall anchor, Foldable Anchor, mushroom anchor, triangle anchor, admiralty Anchor, Speke anchor, HHP stockless anchor, Danforth anchor, etc.
Specification of Anchor
- Stainless steel
-High corrosion-resistance.
-Very effective under a wide variety of sea bed, tide and wind combinations.
-Sets and re-sets fast and easily.
-High holding power.
Application of Anchor
The anchor is an equipment used when vessel is approaching to port or harbor. The anchor is tied on the iron line on board and put into the seawater to help the vessel in stability and security.
Various kinds of anchor are sold, such as marine anchors, Hall anchor, Foldable Anchor, mushroom anchor, triangle anchor, admiralty Anchor, Speke anchor, HHP stockless anchor, Danforth anchor, etc.
These test pumps are a fast, safe and simple method for hydrostatic testing, ideally suited to work with the above plugs or on a stand alone basis eg heat exchanger tubes, pipes, pressure vessels, hoses, etc.
These test pumps are for oil, water or aggressive medium are complete hydraulic units ready for connection which are provided for generating operating pressure up to 1,500bar.
The pressure will be generated by means of a pneumatically operated pump. The pump will be connected to the existing industrial compressed-air ductwork system.
Advantages
- Standstill of the pump when reaching the set final pressure
- No energy consumption in case of long pressure holding times
- No dissipated heat during the pressure holding phase
- Substitute of leakage by automatic re-delivery through the pump
- Regulator to control inlet air supply
- High pressure bleed valve and high pressure outlet
- Simple air-driven pump
- Test in the field or in the shop
- Simple installation, operationally reliable, easy to maintain
Condition: New Type: Piston Configuration: Stationary Power Source: AC Power Lubrication Style: Lubricated Mute: No Place of Origin: Chongqing, China (Mainland) Brand Name: JINBO Model Number: SF-10AFF Voltage: 380V/440V Dimension(L*W*H): 1424*890*1190 Weight: 700kg Certification: ISO Warranty: 1 Year After-sales Service Provided: Overseas third-party support available Application: Instruments
Type CRP20 CRP42 CRP85 CRP168
Input power max.(KW) 45 100 210 300
HP 61 135 285 400
Input torque max.(Sf=1) 200 420 850 1675
Input speed max. 2300 2500 2350 2000
Reduction Rate i I 1.93 2.5 2.68 3.46
I up 1.7 1.64 1.65 1.53
I down 1.13 1.52 1.62 2.26
propeller diameter Max. 500 800 950 1150
Min. 700 900
PAL length* Max. 2250 2800 2800 4250
Min. 350 875 980 1400
Weight (including blades, lubricating oil, and the minimum PAL) 65 190 300 1370
PAL increase the weight of kg per 100mm 8 9 20.4 40
PAL is the vertical distance from the center line of the center line of the power input flange.
