Product name:2016 hot selling customized spray mgo boar Normal size: 1220mm×2440mm Max width: 1220mm Max length: 3000mm Thickness range: 3-20mm Availiable color: White, grey, green, red and pink Fireproof A grade (gb8624) Density 0.96-1.03g/cm3 (gb/t7019-1997) Intensity of bending resistance when dry 18mpa (gb/t7019-1997) Intensity of bending resistance when moisture-saturated condition 22mpa (gb/t7019-1997) The rate of deformation when pick up the moisture 0.26% (ga160-1997) The shrinking rate when heated 1.0% (ga160-1997) Water permeability There is no drop of water to emerge in the back (cns 13778) Impact resistance No carck, strip and run through (cns 13778) Thermal resistance 1.14m2k/w (gb/t13475-92) Sound insulation >44db (gbj121-88) Security 100% no asbestos
The application of pigments is Asphalt,Rubber,Paper;Cement,Concrete,Masonry;Painting,Coating;Paper,Plastics
The application of pigments is Asphalt,Rubber,Paper;Cement,Concrete,Masonry;Painting,Coating;Paper,Plastics
We mainly produce three types calcium chloride, they are powder, flakes and granule, and our products are usually used in feed, food, industrial and food industry. We have been cooperated with many big foreign companies, such as origination o2d, chemical solution, quadra chemical and jonathan green. The process of our calcium chloride is pure natural physical reaction without any chemical reaction and pollution, so the purity is above 99.9%. It has tested by relevant authorities such as sgs about the bacterial detection and pharmaceutical raw material grade of calcium chloride.
1.Excellent dielectric property 2.Excellent water and oxidative resistant performance 3.Operating temperature range (-50C to 27;C) 4.Adhere well to metal, ceramic, rubber and other isolation materials 5.Excellent corona resistance 6.Non-poisonous and low volatile PROPERTY STANDARD VALUE Color Visual inspection Transparent/Light grey Density 25C, g/cm3 1.0 Penetration (Static) mm/10 250 Penetration (Dynamic) mm/10 350 Max Oil Bleed 24hours, 27;C 12% Max Volatility 24hours, 27;C 2% Max Volume resistance 27;C, ohm-cm61;¨¢1012 Dielectric constant MHz 2.9 Power factor 100Hz -10MHz 0.0025 dielectric strength 1.25mm gap, kV/mm 19.5 1 KG/Bucket, 25 KG/Bucket, 200KG/ Bucket.
;Key Features .Two-part : mixture addition type silicone adhesive 2.Low hardening shrinkage 3.Excellent electrical insulation in high temperature and stability 4.Good waterproof and moisture resistance 5.Excellent flame resistance, UL No: E34099 ;Typical Applications Used for encapsulation of various modules, automotive module, LED Power driver modules, Solar panel junction box, EV charging column module, Lithium battery pack, Capacitor banks, Magnetic induction coils, Power inverters, etc. ;Technical Data Table PROPERTY STANDARD/UNITS VALUE of SI2230 ---- ---- PART A PART B Color Visual inspection white / black viscous liquid white viscous liquid Viscosity 27;C, cps 6;¨¤500 6;¨¤500 Density 27;C, g/cm3#6;¨¤0.05#6;¨¤0.05 Mixture ratio Mass ratio A:B=00:00 Viscosity of mixture 27;C, cps 6;¨¤500 Operation time 27;C, min 60¨¤0 Cure condition RTV/HEAT 27;C/ 4 hour;#7;C/ 30min Cured appearance ---- White/ Gray-black elastomer Hardness Shore A 56;¨¤5 Thermal conductivity W/mK 0.80 Linear expansion coefficient K-, ppm 300 Dielectric strength kV/mm, 27;C Y20 Volume resistance DC500V, ohm-cm .¨¢05 Loss factor MHz 0.009 Dielectric constant MHz 3.00 Application temperature C -60~200 Flame resistance UL-94 V-0 Part A--0 KG/Bucket, Part B--0 KG/ Bucket.
One Component Thermal silicone Grease/Lubricating silicone Grease CAS No.:67763-03-05 Other Names:adhesives sealants MF: mSiO2nH2O EINECS No.: 231-545-4 Place of Origin:Shanghai, China (Mainland) Classification:Other Adhesives Main Raw Material:Silicone Usage:Construction, Fiber & Garment, Footwear & Leather, Packing, Transportation, Woodworking, Electronics,ceramics,air filters/steam irons Brand Name: SEPNA Model Number:SI1101 Type:one-component Product name:Thermal silicone Grease/Lubricating silicone Grease Color:White Paste Density: 2.2 Thermal conducivity: 1.5 Packing: 2 KG/Bucket Certificate:SGS, ISO9001:2008, MSDS, RoHS,Reach ODM/OEM:Accepted Shipping:By Express(Fedex, UPS ,DHL,TNT) Samples::Free samples sample time: within one week Packaging Details:Package for Thermal silicone Grease 2 KG/Bucket Delivery Detail:10 days
Iron Oxide red 101,red 130,red 190,yellow 313,311,920,black 780,brown 610,686,green 835,5605. It is widely used for the coloring of paint, rubber, plastics, building materials, ceramics and enamels, precision metal instruments, optical glass, stationery, leather, magnetic alloys and advanced alloy steel. 25kg/compound kraft bag
Be reactive groups vinyl that can be used in different property of addition silicone rubber, electronic silicone rubber, basic polymer and so on. 20kg/set£¨A10kg+B10kg), packaging with bucket.
Silicone grease is semi-permeable white grease, the properties are non-toxic, superior waterproof and adhesiveness, that can be compatible with plastic and keep the stability of lubrication.Widely used in appliances, toy, office equipment such as photocopier, paper shredder/printer and plastic gear of massager. according to customer's demand
ZS-GF-5299E is a low viscosity two-component addition cure silicone sealant, that can be cured at room temperature or heat cure, the higher the temperature, the faster the curing. This product does not produce any byproducts in the curing reaction, which can be applied for PC (poly-carbonate), PP, ABS, PVC and other surface of metal. Complied with the ROHS, REACH of EU directive.
The filler masterbatch is using high-quality ultrafine inorganic powder and other special ingredients as raw materials and processed by twin-screw extruder. It can significantly improve production efficiency, product whiteness and other physical and chemical index thus improve end-product quality Packing:25kgs/craft paper bag
The filler masterbatch is composed of PE, high-quality calcium carbonate, and a variety of chemical additives. It has good impact resistance. You can add the proportion of up to 75 %, which can effectively reduce the production cost. 1. The product is light-weighted, corrosion-resistant and anti-scaling with long service life. 2. It is compatible with general resins. 3. It can absorb sound of national standard 40db by the use of multi-layer co-extrusion. 4. It can be directly added to plastic products without other additives. 5. It is of excellent insulation performance and meet the requirement of water supply and drainage for buildings. 6. It odorless, non-toxic and environmental-friendly, suitable for the hot and cold water systems and purified water for drinking. Particle Size 2-3mm Mesh No. 1000-1800 Filler Calcium Carbonate Carrier Resin PE Density(g/cm3) 1.2-1.4 MFI(g/10min) 1
This filler masterbatch is made from PE, high-quality transparent calcium carbonate and chemical additives by special processing technology. It can highly improve the efficiency of film blowing, reduce the cost and improve their own physical and mechanical properties while imposes little impact on the transparency of PE film. 1.Its high transparency and high tensile strength can significantly improve the level of stiffness, impact-resistance, hardness, thermal deformation temperature. 2.Its good dispersion can improve plasticizing and smoothness. 3.It can enhance the shape stability of the final product and improve the resisting ability. 4.It can greatly improve the production efficiency and reduce costs.
Iron oxide red is used as dye or colorant in various prefabricated concrete parts and architectural products and materials. It is directly added into cement to color up various indoor and outdoor cement surfaces, i.E. Walls, terraces, ceilings, pillars, corridors, roads, car-park, stairs, stations, etc, as well as various building ceramic and glazed ceramics, i.E. Facing bricks, floor tiles, roofing tiles, panels, terrazzo, mosaic tiles, artificial marbles, etc. Package 1.25kg (1) 25kg in woven bag lined with plastic and 3 layers kraft bag (2) 25kg in woven bag lined with plastic. (3) 25kg in 4 layers kraft bag 20" container: 20 tons red, black; 20" container: 12.5 tons yellow 2.Ton package (1) red, black 25kg¡¡§¡é40pieces+ wood tray +pvc thermal shrinkage film . Yellow25kg¡¡§¡é20pieces+ wood tray +pvc thermal shrinkage film . (2) red, black 900kg, 1000kg opening container bag+wood tray +pvc thermal shrinkage film. Yellow 500kg opening container bag + wood tray +pvc thermal shrinkage film. (3) yellow625kg/pieces opening container bag +pvc thermal shrinkage film.It is for bulk cargo.20" container: 20 tons red, black; 20" container: 10 tons yellow 3.Bag package (for bulk cargo) Red, black 25kg¡¡§¡é40pieces in a bag yellow25kg¡¡§¡é20pieces in a bag 25kg¡¡§¡é25pieces in a bag 3.Application: 1)used for coloring of construction, paints, plastic rubber, printing ink, porcelain, colour asphaltum, paper dyes, ect. 2)the construction material including metope, ground and marble. And the painting material including oil paint, antisepsis, spray, mosaic bricks, for concrete production, bricks used in pavement, colorful tiles, ect. 3)plastic including thermoset, thermoplasticity plastic coloring, and plastic racetrack, ect.
Process with excellent control of particle-size and unique coating technology. It is coate r915 for coating is rutile titanium dioxide pigments manufactured by the sulphate d with inorganic and special organic surface treatment. It has excellent pigment properties, with good whiteness and gloss, excellent hiding power strong tinting strength, superior weatherability and chalk resistance, is easy wetting and easy to disperse. R915 can endow the coating film bright color, enhance its mechanical strength & adhesion and keep it from crazing. It can also prevent the penetration of uv or moisture, improving the chalk resistance of film to extend its working life. Specification: Basic characters --------more than98.5% Technical specification Oil-phase whiteness(l)----95.4-95.9 Hue(b)----1.7-2.0 Relative scattering power(iso 787-24)------compared with standard more than 100% Ph value of aqueous suspension(iso 787-9)6.5-8.0 Oil absorption(iso 787-5)-----less than 20g/100g Resistivity of aqueous extract(iso 787-14)-more than80|¸m
Properties¡¨ºowhite powder, non-toxic, stable chemical property, its particle sized reached standards, better whiteness, glossiness and luste¡¨º» stronger hiding powder and tint reducing power, good dispersibility. Tint reducing power (contrast to the standard sample) (%) minclose Whiteness min90 Matter soluble in water (%) max0.5 Ph of aqueous suspension6.5-8.0 Residue on sieve (%) max0.05 Oil absorption (%) max23 Volatile at (105¡æ) (%) max0.5 Resistivity in water extraction min30 A100 main properties and features Chemical substancestio2/anatase¡¨º¡¡ìa101¡¨º© Appearancewhite powder Packing:25kg woven bag Main featuresgood chemical stability, high tinting reducing power and hiding power Range of applicationmainly used in plastics decorative coatings, powder coatings..... And the general industrial coatings and paint. Rubber. Paper. Emulsioni paint, etc.
Food grade titanium dioxide test report Description of use: the product has no poison and no smell, appears to white powder. It can improve whiteness for food and natural defence against ultraviolet. With steady capability, it is mainly used for jelly, yoghourt, candy, cosmetics, medical capsule, etc. Chemical materialtitanium dioxide (ti02)/anatase Grade:special titanium-type pigment with high-purity. Basic characteristics: comply with chinese pharmacopoeia (version 2005) and specification of food additives.Q/ibey4-2005 Type:iso 9001: 2000 ¡ê»haccp Pigment index no.:white pigment 8 Cas no.:13463a67a7 Einecs no.236a675a5supply status: powder Storage original package is stored in dry warehouse with roof, two layers of pallets can be piled Serial number technical data (unit)indextest method 01titanium dioxide content (%)99gb1706-2006 02volatile matter under 105æ (%)max.0.5iso 787/2-1978 03water soluble salt (%)max.0.5iso 787/8-2000 04acid soluble salt (thermal filtration 0.5m hci)%max.0.5sptm¡êolm/tb.14 05loss on ignition % under 800æmax.0.5sptm¡êolm/tb.13 06whiteness %min.97.0 sptm¡êolm/tb.12.2 07al2o3 %max.0.5sptm¡êolm/tb.17 08sio2 %max.0.5sptm¡êolm/tb.17 09as mg/kg ¡ê¡§usp approach¡ê©max.5sptm¡êolm/tb.23 10acid soluble sb mg/kg max.2sptm¡êolm/tb.22 11acid soluble ba mg/kgmax.5sptm¡êolm/tb.24 12heavy metal mg/kg max.20sptm¡êolm/tb.24 13zn mg/kgmax.50sptm¡êolm/tb.17 14sb mg/kgmax.50sptm¡êolm/tb.17 15cr mg/kgmax.20sptm¡êolm/tb.19 16pb mg/kgmax.10sptm¡êolm/tb.19 17as mg/kgmax.3sptm¡êolm/tb.19 18hg mg/kgmax.1sptm¡êolm/tb.21 19cd mg/kgmax.1sptm¡êolm/tb.19 20fe mg/kgmax.50sptm¡êolm/tb.17 21overall evaluation qualified ( ¨¬) unqualified ( )
Indirect zinc oxide Weight¡¨ºo81.39 un:3077
hs¡¡§oo2817001000 UN¡¡§oo3077 81.39 UN:3077
