Basic Characteristics Appearance: slightly yellow transparence liquid Ionicity: Cationic PH value: 4.5-6.5 Solubility: can be can be dissolved in water at any ratio Hand feeling:instantly hydrophilic Features And Advantages This product is cationized amino and polyether modified multi-copolymer block silicone oil emulsion, especially suitable for processing all kinds of chemical fiber, cotton, wool and blended fabric, does not affect the fabric itself hydrophilic; no yellowing, suitable for bleaching or light-colored fabric; 1.This product is particularly suitable for processing cotton or polyester-cotton fabric, can achieve instantaneous hydrophilic effect, hand feeling general; 2.This product can be used as antistatic agent for chemical fiber fabric; cationic strong, and anion may occur coagulation, application before the need to do the application test, or add the company's specialty products anion and cation anti-coagulation agent; 3.high temperature resistance, suitable for a variety of processing technology, will not bring sticky roller, high suction rate; without APEO. Usage 1.This product is 50% solid content of high concentration emulsion, can be used directly, or better using after thinning,using after diluting at the recommended ratio1: 2.5 (20% solids) or 1 :5 (10% solids) , and adjust the PH value of acetic acid to 6-6.5; The speed should not be too fast, otherwise the bubble more; 2. After thinning, you can use exhausting method and continuous padding mothod: Exhausting method: the dosage (20% solids) 1-4% (owf), temperature 30-40 15-30min, bath ratio 1: 20-40; Padding method: the dosage (20% solids) 10-40g / l, 120 pre-bake, 150-180 stereotypes baking; Packaging and storage 50kg or 200kg plastic drums. Should be stored in a cool ventilated warehouse, to prevent exposure, storage period for half a year. -
Basic Characteristics Appearance: slightly yellow transparent liquid Ionic: slight cationic PH value: 4.5-6.5 Solubility: can be dissolved in water at any ratio Hand feeling: special soft, smooth Features And Advantages This product is the end of epoxy silicone oil and ammonia ether polymerization (solvent is ethylene glycol monobutyl ether, solvent content of 40%), and finally add the end of epoxy polyether chain derived multi-copolymer block silicone oil emulsion, especially suitable for processing polyester and wool fibers, feel the characteristics of special sponginess, good soft and smooth; also suitable for cellulose fiber, nylon and other blended fabric feel finishing; Mixed with M-100A and 9905A silicone oil products, especially suitable for a variety of polyester velvet, wool blankets, chemical fiber lace and other fabric feel finishing,Meet the needs of customers fluffy, soft and smooth comprehensive effect. Mixed with M-100A and 9906A silicone oil products, especially for poly-cotton, cotton knitted fabric finishing; Dilution and use the method This product is 50% solid content of high concentration emulsion, can be used directly, or better using after thinning, the recommended ratio can be diluted 1 : 2.5 (20% solids) or 1 :5 (10% solids) , do not need to adjust the PH value; After thinning, you can use exhausting method and continuous padding method, Exhausting method: the dosage (20% solids) 2-4% (owf), temperature 30-40 , 15-30min, bath ratio 1: 20-40; Padding method: the dosage (20% solids) 20-40g / l, 120 pre-bake, 150-180 Package And Storage 50kg or 200kg plastic drum.Should be stored in a cool ventilated warehouse, to prevent exposure, storage period of half a years.
Physical and chemical property: Appearance: Clear to yellowish Liquid Ionic properties: Cationic Active content: 60 1% Product characteristics: Soluble in cold water, impart surface smooth, inner soft and elasticity Super yellowing-resistant, shearing resistant and warm water washing Processing PH range from 1-11, high temperature 90C'-10C' resistant Improve sewing ability, especially suitable for cotton woven fabric Highly resistant to electrolytes, suitable for resin finishing Non-toxic to cellulase Usage Method: Padding recommended usage: 5-20g/l, 1g/l acetic acid as well Exhausting: 0.5%-2% (O.W.F), 20 minutes Adjust dosage according to different fabric and requirements Package and Storage: 200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 6 months of storage expiry.
Material:100% new hdpe+uv Mesh shape:triangle or square Color:green, dark green (or as your request) Gram weight:50gsm, 95gsm Net size:3*6m, 5*10m, 6*12m, 7*14m or as your request Payment:t/t , l/c Delivery time:35 days after 30% down payment
Physical and chemical properties: Appearance: Clear to yellowish Liquid Ionic properties: Cationic Active content: 40 ± 1% Product characteristics 1.Impart surface smooth, inner soft and elasticity 2.Super yellowing-resistant, shearing resistant and warm water washing 3.Processing PH range from 1-12, high temperature 90-100 resistant 4.Improve sewing ability, especially suitable for cotton knitting fabric like terry towel 5.Highly resistant to electrolytes, suitable for resin finishing 6.Suitable for dyeing vat and jet machine processing Usage Method Exhausting: 1%-3% (O.W.F), 20 minutes Adjust dosage according to different fabric and requirements Package And Storage 200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 6 months of storage expiry
Basic Characteristics Appearance: slight yellow transparent liquid Ionic nature: slight cationic pH value: 4.5-6.5 Solubility:can be dissolved in water at any ratio Hand feeling: fluffy, soft Features and advantages This product is amino and polyether modified multi-copolymer block silicone oil emulsion, especially suitable for processing all kinds of chemical fiber fabrics, such as polyester, nylon, acrylic and blended fabric, feel fluffy soft, smooth better; slightly yellowing, not suitable for bleaching or light-colored fabric; This product is particularly treated polyester velvet fabric can have a very good fluffy and soft feeling, good degree of fine, can significantly improve the softening of thickened fabric; Mixed with 803A series silicone oil suitable for cotton paint printing, to enhance the soft; Mixed with M series silicone oil suitable for cotton and poly-cotton knitted fabric feel finishing, feel soft and delicate; Suitable for continuous processing of the process, will not bring sticky roll; also suitable for padding method, high suction rate; without APEO. Usage This product is 50% solid content of high concentration emulsion, can be used directly, or better using after thinning,the recommended using proportion can be diluted 1 :2.5 (20% solids) or diluted 1: 5 (10% solids), do not need to adjust the PH value; After thinning, you can use exhausting method and continuous padding method. exhausting method: the dosage (20% solids) 2-4% (owf), temperature 30-40 , 15-30min, bath ratio 1: 20-40; Padding method: the dosage (20% solids) 20-40g / l, 120 pre-bake, 150-180 stereotypes baking; Packaging and storage 50kg or 200kg plastic drums. Should be stored in a cool ventilated warehouse, to prevent exposure, storage period for half a year.
Physical and chemical property: Appearance: Yellowish or Transparent Liquid Ionic properties: Slight Cation/Nonionic Solid content: 60 1% PH value (1% aqueous solution 20): 6-8 Product characteristics 1.Super smooth and soft 2.Especially suitable for polyester fabric and blends 3.Suitable for continuous process techniques, no stick roller 4.Without APEO Usage Method Diluted with water at ratio 1:5-7, self-emulsifying. Exhausting: recommended usage: 2--4% (O.W.F) Padding: 1540g/l The special process, please appropriate adjustments according to the samples. Package And Storage 200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 12 months of storage expiry.
Physical and chemical property: Appearance: Yellowish or Transparent Liquid Ionic properties: Slight Cation/Nonionic Solid content: 60 1% PH value (1% aqueous solution 20): 6-8 Product characteristics 1.Super smooth and soft 2.Especially suitable for polyester fabric and blends 3.Suitable for continuous process techniques, no stick roller 4.Without APEO Usage Method Diluted with water at ratio 1:5-7, self-emulsifying. Exhausting: recommended usage: 2--4% (O.W.F) Padding: 1540g/l The special process, please appropriate adjustments according to the samples. Package And Storage 200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 12 months of storage expiry.
Physical and chemical property: Appearance: Clear to yellowish Liquid Ionic properties: Cationic Active content: 60 1% Product characteristics: Soluble in cold water, impart surface smooth, inner soft and elasticity Super yellowing-resistant, shearing resistant and warm water washing Processing PH range from 1-11, high temperature 90C'-10C' resistant Improve sewing ability, especially suitable for cotton woven fabric Highly resistant to electrolytes, suitable for resin finishing Non-toxic to cellulase Usage Method: Padding recommended usage: 5-20g/l, 1g/l acetic acid as well Exhausting: 0.5%-2% (O.W.F), 20 minutes Adjust dosage according to different fabric and requirements Package and Storage: 200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 6 months of storage expiry.
Gas patio heater, patio heater, gas heater, fire pits, bbq.
Tubing oil casing pipe.
Oil cooler White box
Physical and chemical property: Appearance: Colorless transparent liquid Ionic properties: Cationic Active content:53% Stability: Super Stable Kind: Finishing Hand Feeling: Super smooth Product characteristics l Soluble in cold water, impart surface smooth, inner soft and elasticity l Super yellowing-resistant, shearing resistant and warm water washing l Processing PH range from 1-11, high temperature 90-100 resistant l Improve sewing ability, especially suitable for cotton woven fabric l Highly resistant to electrolytes, suitable for resin finishing l Non-toxic to cellulase Usage Method l Padding recommended usage: 5-20g/l, 1g/l acetic acid as well l Exhausting: 0.5%-2% (O.W.F), 20 minutes l Adjust dosage according to different fabric and requirements Package And Storage l 200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 6 months of storage expiry.
Palm oil.
Rice, maize and edible oil.
Gas pump.
It is used for a variety of fibers containing the fast extraction of oil to determine oil content. Standards: gb6504, 6977 Main technical data Temperature control range Room temperatureí½199.9íµ Temperature indicator accuracy ía0.5% Heating power 100w Powerú¦ Ac220v 50hz.
Hyontec sd system degreasing machine adopts ultrasonic technology, mainly used for the metal degreasing. Our company is good at manufacture belt and tank cleaning equipment according to customer requirements. You can design the process, for example: Spray degreasing -- ultrasonic degreasing -- rinsing -- rinsing -- passivation washing -- wind shear -- drying Just tell us what you need; we will find the most economical and effective solution for you. Container
Physical form : Liquid,Colorless Specific gravity: 25oc:0.965 0.973g/cm3 Viscosity: 100cst, 200cst, 350 cst, etc. 18IBC/20'FCL,net weight:18MT/20'FCL.
1. Refillable glass oil lamp. just fill smokeless and odorless oil which can easily be found in the store. 2. Glass container connect with wick holder by a thread, which is safer against risk of opening by Child, additional wick guard even double-shield glass make safer. 3. Abundant glass shape and color for option, customized shape and color is accepted at affordable price.
