Model Chemical Composition%
Si Mg Ca Re Ba La Fe
BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance
BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance
BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance
BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance
BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance
BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance
BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance
Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm
Packing: 25kg woven plastic bag in 1mt jumbo bag.
Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements.
Characteristics
1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed.
2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products.
3.High mechanical strength and strong deoxygenation and desulfuration effects.
Model Chemical Composition%
Si Mg Ca Re Ba La Fe
BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance
BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance
BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance
BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance
BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance
BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance
BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance
Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm
Packing: 25kg woven plastic bag in 1mt jumbo bag.
Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements.
Characteristics
1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed.
2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products.
3.High mechanical strength and strong deoxygenation and desulfuration effects.
41 Industrial Chemicals Suppliers
Short on time? Let Industrial Chemicals sellers contact you.
Model Chemical Composition%
Si Mg Ca Re Ba La Fe
BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance
BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance
BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance
BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance
BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance
BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance
BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance
Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm
Packing: 25kg woven plastic bag in 1mt jumbo bag.
Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements.
Characteristics
1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed.
2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products.
3.High mechanical strength and strong deoxygenation and desulfuration effects.
Characteristics
1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed.
2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products.
3.High mechanical strength and strong deoxygenation and desulfuration effects.
Physical and chemical property:
Appearance: Clear Liquid
Ionic properties: Non-ionic
Active content: 100%
Product characteristics:
Soluble in cold and warm water
Super alkali-resistant and acid-resistant
Low foaming after temperature up to 70
High concentration detergent with dispersing and emulsifying properties
Non-toxic to enzymes, high surface activity
Usage Method:
Polyester and nylon fabric procedure: recommended usage: 0.5-1.5g/l
Using 2-3g/L oxalic acid to get excellent washing effect for polyester
Package And Storage:
200kgs per plastic drum, this product will solidify if stored below 0 C for a long time, heated to 20-25 C and stirred for normal use.
Physical and chemical property:
Appearance: Clear Liquid
Ionic properties: Non-ionic
Active content: 99 %
Product characteristics:
Soluble in cold and warm water
Super alkali-resistant
Low foaming and anti-foaming effect
Excellent dirt levitation and grease emulsifying ability
Non-toxic to enzymes, suitable for desizing
Physical and chemical property:
Appearance: Colorless to yellow Liquid
Ionic properties: Polysiloxane compound, cation
Active content: 21%
Applicationdurable, hydrophilic, stable with super soft and fluffy hand feel, especially suitable for chemical fiber.
Product characteristics:
Super soft, fluffy, durable, hydrophilic and stable, suitable for fibers
200 high temperature resistance
Excellent shear stability and process safety
Strong anion resistance, pH scope 1-12
Especially suitable for absorption process
Product Application:
Impregnating process: dilute by cold water or warm water under 30, add to finishing bath, adjust the bath pH to 4.5-5.5 by using monoamino-acid(acetic acid, do not use Formic-acid).
1-3% LC (O.W.F)
pH 5.0-5.5(adjusted by acetic acid)
Temperature 40C
Time 20min Drying Under normal conditions< 180 C
Padding process:
10-30 g/l LC
mangle expression 60-80%
Drying Under normal conditions< 180 C
Package and Storage
200kgs per plastic drum, The product is sensitive to cold and high temperaturesdo not store below 0or above 40.Otherwise unrecoverable qualitative changes may occur. If the storage temperature is too high or too low, it should be tested before use.
HYDROPHILIC SILICONE EMULSION DL3112
Physical and chemical property:
Appearance: Clear to yellowish Liquid
Ionic properties: Cationic
Active content: 40%
Product characteristics
1.Impart surface smooth, inner soft and elasticity
2.Super yellowing-resistant, shearing resistant and warm water washing
3.Processing PH range from 1-12, high temperature 90??-100?? resistant
4.Improve sewing ability, especially suitable for cotton knitting fabric like terry towel
5.Highly resistant to electrolytes, suitable for resin finishing
6.Suitable for dyeing vat and jet machine processing
Usage Method
Exhausting: 1%-3% (O.W.F), 20 minutes
Adjust dosage according to different fabric and requirements
Package And Storage
200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun
exposure, 6 months of storage expiry
Nanometer lanthanum oxide used in piezoelectric materials, electric materials, thermoelectric materials, magnetic resistance materials, luminescence materials (powder) hydrogen storage materials, optical glass, laser materials, all kinds of alloy materials, preparation of organic chemical products of catalyst, and automobile exhaust catalyst, light conversion agricultural film.
The main purpose of nano yttrium is: 1. The additive of steel and non-ferrous alloy.2. The high nano-yttrium oxide high temperature proton conduction materials containing 90% of yttrium oxide are of great significance for the production of fuel cells, electrolytic pools and gas-sensitive components requiring high solubility of hydrogen.In addition, yttrium oxide is also used for high temperature spraying materials.
The main USES of nano-cerium oxide are: 1. Cerium oxide is used as a glass additive to absorb ultraviolet and infrared rays and has been used in automobile glass.Not only can prevent ultraviolet ray, also can reduce the temperature inside the car, thereby save air conditioning electricity.2. The application of nano-cerium oxide to automobile exhaust purification catalyst can effectively prevent a large amount of automobile exhaust gas from being discharged into the air.3. Nano cerium oxide has been widely used in polishing materials.4, nanometer cerium oxide can also be used in hydrogen storage material, thermoelectric materials, nano oxide cerium tungsten electrode, ceramic capacitors, piezoelectric
dysprosium oxide dy2o3 nanopowder
1. Used for making metal dysprosium material, glass, additive of ndfeb permanent magnet;
2. Also used for metal halogen lamp, magneto optical memory materials, yttrium iron or yttrium aluminum garnet, atomic energy industry.
Nanometer lanthanum oxide used in piezoelectric materials, electric materials, thermoelectric materials, magnetic resistance materials, luminescence materials (powder) hydrogen storage materials, optical glass, laser materials, all kinds of alloy materials, preparation of organic chemical products of catalyst, and automobile exhaust catalyst, light conversion agricultural film.
Nanometer lanthanum oxide used in piezoelectric materials, electric materials, thermoelectric materials, magnetic resistance materials, luminescence materials (powder) hydrogen storage materials, optical glass, laser materials, all kinds of alloy materials, preparation of organic chemical products of catalyst, and automobile exhaust catalyst, light conversion agricultural film.
dysprosium oxide dy2o3 nanopowder
1. Used for making metal dysprosium material, glass, additive of ndfeb permanent magnet;
2. Also used for metal halogen lamp, magneto optical memory materials, yttrium iron or yttrium aluminum garnet, atomic energy industry.
The main USES of nano-cerium oxide are: 1. Cerium oxide is used as a glass additive to absorb ultraviolet and infrared rays and has been used in automobile glass.Not only can prevent ultraviolet ray, also can reduce the temperature inside the car, thereby save air conditioning electricity.2. The application of nano-cerium oxide to automobile exhaust purification catalyst can effectively prevent a large amount of automobile exhaust gas from being discharged into the air.3. Nano cerium oxide has been widely used in polishing materials.4, nanometer cerium oxide can also be used in hydrogen storage material, thermoelectric materials, nano oxide cerium tungsten electrode, ceramic capacitors, piezoelectric
