we are experience in doing electroplating equipment, coating equipment , and enviromental equipment.With strong technical force and capability of manufacturing ,installing and debugging first-class equipment,we have more than ten senior engineers and engineers in charge of overall design for various electroplating engineering,design for technical equipment and development of new products
ZLYJ series Gearbox for Single Screw Extruder is a kind of special gearbox researched and developed by importing the most advanced technology of the hard tooth surface in the world. For recent ten years, It is widely used in the top and middle-grade plastic, rubber, and chemical fiber extruders, and sell well in the domestic and overseas, and has a higher reputation in the industry.
Product Feature
1.The whole machine looks beautiful and liberal, which can be used both vertically and horizontally. It can suit multiple requirements of assembling.
2.The gear data and box structure are optimally designed by the computer. The gears are made of top-grade low carbon alloy steel with Grade 6 precision of teeth after carbon penetrating, quench and teeth grinding. The hardness of the teeth surface is 54-62 HRC. The gear pair has stable running, low noise, and has high driving efficiency.
3.The assembling connector has the precision of radial run-out and end face run-out at the international level, and can be easily connected with the screw rod of the machine barrel.
4.The bearing structure of the output shaft has a unique style, which can effectively prolong the service life of the bearings.
5.All standard parts such as bearing, oil seal, lubricant oil pump, etc. are all top quality products selected from domestic famous manufacturers. They can be also selected from imported products as per the requirement of the customer.
SZ series gearbox for conical twin-screw extruder is a special driving unit matched with conical twin-screw rod extruder. It consists of two parts, namely, the reduction box and the distribution box. After reducing speed and increasing torque of the motor, it outputs the motive power to the distribution box, then drives the double output shafts (the included angle is the same with that of twin-screw rods) via a pair of small conical spiral gears with driving ration of 1:1,thus to drive screw rods to rotate outward with different direction.
Product Feature
1.There are involute cylindrical gearbox, which data and structure are optimally designed by the computer.
2.The gears are made of top-quality high strength low carbon alloy steel after carbon penetrating, quench and teeth grinding. It has high hardness on teeth surface, large bearing ability, small noise, smooth operation and high driving efficiency.
3.The material of the distribution box is nodular graphite casting iron and the gears have high-strength ground teeth, in which snake-shaped cooling water pipes are distributed.
4.The maximum input speed of the gearbox is normally not larger than 1500 rpm.
5.The temperature in work environment is -10-45.When temperature is lower than 0,the lubricant oil should be preheated to + 10 before starting.
YPS series gearbox is a standard driving part designed and developed for counter-rotating parallel twin screw extruder. Its gear is made of low carbon alloy steel by carbon penetrating, quench and teeth grinding to reach high strength and precision. The output shaft is finely made of special alloy steel to suit the requirement of large output torque. The thrust bearing group is a combination design that adopts advanced tandem thrust cylindrical roller bearing and full complement cylindrical roller bearings which have a large bearing capacity. The lubrication style adopts oil immersion and spray lubrication and it can also be equipped with pipe style cooling system based on the different requirements of the machine. The whole machine has a well-balanced appearance advanced structure superior bearing performance and smooth operation. It is an ideal selection of counter-rotating parallel twin screw extruder gearbox.
1510 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
FHP V-Belt Pulley - A, 4L, B, 5L Belt Section, 2 Groove, 9.5 in Pitch Dia., 10.25 in O.D., Bushed, H Series Bushing, Cast Iron Material
For light duty applications.
For use with Split Taper Bushings.
Tolerances adhere to industry guidelines.Precise machining and processes ensure consistent finish and high quality.
Number of Grooves 2
Outside Diameter 10.25 in
Length Through Bore 1.25 in
Face Width 0.8750 in
Belt Section Size B, 4L, 5L, A
Bore Type Bushed
Bushing Series H
Keyway Size 3/8 x 1/32 in
Material Cast Iron
Bushing Bore Range 0.3750 to 1.3750 in
Pitch Diameter 9.5 in
Overall Width .875 in
Bushing Bore V-Belt Pulley - 3V Belt Section, 2 Groove, 4.12 in Pitch Dia., 4.12 in O.D., QD Bushed, SH Series Bushing, Cast Iron Material
Number of Grooves 2
Outside Diameter 4.12 in
Length Through Bore 1.2500 in
Face Width 1.0938 in
Belt Section Size 3V
Bore Type QD Bushed
Bushing Series SH
Keyway Size 1/4 x 1/8 (15/16 to 1-1/4 Bore) in, 1/8 x 1/16 (1/2 to 9/16 Bore) in, 3/16 x 3/32 (5/8 to 7/8 Bore) in, 3/8 x 3/16 (1-7/16 to 1-5/8 Bore) in, 5/16 x 5/32 (1-5/16 to 1-3/8 Bore) in
Material Cast Iron
Bushing Bore Range 1/2 to 1-11/16 in
Pitch Diameter 4.12 in
Overall Width 1-11/32 in
Terms of delivery: FOB shanghai/Ningbo
Payment condition: TT
Delivery Period: 30days
Packing: Export packing/As per customer's request
We have a Pump valve parts production
Model No: Customized
Material: Carbon steel/alloy steel/stainless steel
Type : Chemical Hardening Sand
Casting Method : Thermal Gravity Casting
Sand Core Type : Resin Sand Core
Application : Oil and Gas
Machining : CNC machining
butterfly valves manufacturer
Pump valve
Terms of delivery: FOB shanghai/Ningbo
Payment condition: TT
Delivery Period: 30days
Packing: Export packing/As per customer's request
We have a Pump valve parts production
Model No: Customized
Material: Carbon steel/alloy steel/stainless steel
Type : Chemical Hardening Sand
Casting Method : Thermal Gravity Casting
Sand Core Type : Resin Sand Core
Application : Oil and Gas
Machining : CNC machining
Terms of delivery: FOB shanghai/Ningbo
Payment condition: TT
Delivery Period: 30days
Packing: Export packing/As per customer's request
butterfly valves manufacturer:Changzhou Kadi International Trade Co.,ltd
Model No: Customized
Material: Carbon steel/alloy steel/stainless steel
Type : Chemical Hardening Sand
Casting Method : Thermal Gravity Casting
Sand Core Type : Resin Sand Core
Application : Oil and Gas
Machining : CNC machining
More information you can views here
Hyontec sf system curing furnace is widely applied to the surface drying and curing of the zinc-flake coating, alloy coating and outstanding sealant on electroplating industry.
These are some reasons hyontec sf system is the no. 1 choice for the application of all above coatings.
1) dismounting & installation conveniently
Both belt curing furnace and curing oven can supplied for you by your requirements
We make and supply different kinds of filter plates, filter cloth, rubber membrane and other filter press spare parts.
Filter Plates of different size of standard square types, from 250mm x 250mm to 2500mm x 2500mm
Filter Plates of VPA1530, VPA1540, FFP1516, FFP2512, GHT1500....
