Physical and chemical property: Appearance: Colorless transparent liquid Ionic properties: Cationic Active content:53% Stability: Super Stable Kind: Finishing Hand Feeling: Super smooth Product characteristics l Soluble in cold water, impart surface smooth, inner soft and elasticity l Super yellowing-resistant, shearing resistant and warm water washing l Processing PH range from 1-11, high temperature 90-100 resistant l Improve sewing ability, especially suitable for cotton woven fabric l Highly resistant to electrolytes, suitable for resin finishing l Non-toxic to cellulase Usage Method l Padding recommended usage: 5-20g/l, 1g/l acetic acid as well l Exhausting: 0.5%-2% (O.W.F), 20 minutes l Adjust dosage according to different fabric and requirements Package And Storage l 200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 6 months of storage expiry.
Physical and chemical properties: Appearance: Clear to yellowish Liquid Ionic properties: Cationic Active content: 40 ± 1% Product characteristics 1.Impart surface smooth, inner soft and elasticity 2.Super yellowing-resistant, shearing resistant and warm water washing 3.Processing PH range from 1-12, high temperature 90-100 resistant 4.Improve sewing ability, especially suitable for cotton knitting fabric like terry towel 5.Highly resistant to electrolytes, suitable for resin finishing 6.Suitable for dyeing vat and jet machine processing Usage Method Exhausting: 1%-3% (O.W.F), 20 minutes Adjust dosage according to different fabric and requirements Package And Storage 200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 6 months of storage expiry
Plc touch screen control, easy to operate. Small environmental protection and reliable. Is suitable for the laboratory proofing. Liquid coating application Can be used for a variety of domestic and imported oil-based or water base zinc flake coating coated on the surface. Parts ? recommended(max):500g\pc ? recommended length (stamping parts) :150mm ? recommended size (fasteners) :m4-m16 mm Performance (based on m10) ? maximum load :20kg/b ? minimum cycle time :180sec ? average cycle time :240sec ? maximum basket output :20b/h ? average basket output :15b/h ? maximum prodution :400kg/h ? average prodution :300kg/h
dysprosium oxide dy2o3 nanopowder 1. Used for making metal dysprosium material, glass, additive of ndfeb permanent magnet; 2. Also used for metal halogen lamp, magneto optical memory materials, yttrium iron or yttrium aluminum garnet, atomic energy industry.
Nanometer lanthanum oxide used in piezoelectric materials, electric materials, thermoelectric materials, magnetic resistance materials, luminescence materials (powder) hydrogen storage materials, optical glass, laser materials, all kinds of alloy materials, preparation of organic chemical products of catalyst, and automobile exhaust catalyst, light conversion agricultural film.
The main USES of nano-cerium oxide are: 1. Cerium oxide is used as a glass additive to absorb ultraviolet and infrared rays and has been used in automobile glass.Not only can prevent ultraviolet ray, also can reduce the temperature inside the car, thereby save air conditioning electricity.2. The application of nano-cerium oxide to automobile exhaust purification catalyst can effectively prevent a large amount of automobile exhaust gas from being discharged into the air.3. Nano cerium oxide has been widely used in polishing materials.4, nanometer cerium oxide can also be used in hydrogen storage material, thermoelectric materials, nano oxide cerium tungsten electrode, ceramic capacitors, piezoelectric
Resin, paints & coatings.
Painting & coatings.
Spray booth, painting booth, baking booth, mixing room, prep station.OEM service
Paints & coatings.
Metal protection paint,floor paint ,wall paint ,marine paint ,special paint ,road marking paint.
Coating machines.
Hot air gun, polisher, grinder, spray gun, fan heater.
Basic Characteristics Appearance: slight yellow transparent liquid Ionic nature: slight cationic pH value: 4.5-6.5 Solubility:can be dissolved in water at any ratio Hand feeling: fluffy, soft Features and advantages This product is amino and polyether modified multi-copolymer block silicone oil emulsion, especially suitable for processing all kinds of chemical fiber fabrics, such as polyester, nylon, acrylic and blended fabric, feel fluffy soft, smooth better; slightly yellowing, not suitable for bleaching or light-colored fabric; This product is particularly treated polyester velvet fabric can have a very good fluffy and soft feeling, good degree of fine, can significantly improve the softening of thickened fabric; Mixed with 803A series silicone oil suitable for cotton paint printing, to enhance the soft; Mixed with M series silicone oil suitable for cotton and poly-cotton knitted fabric feel finishing, feel soft and delicate; Suitable for continuous processing of the process, will not bring sticky roll; also suitable for padding method, high suction rate; without APEO. Usage This product is 50% solid content of high concentration emulsion, can be used directly, or better using after thinning,the recommended using proportion can be diluted 1 :2.5 (20% solids) or diluted 1: 5 (10% solids), do not need to adjust the PH value; After thinning, you can use exhausting method and continuous padding method. exhausting method: the dosage (20% solids) 2-4% (owf), temperature 30-40 , 15-30min, bath ratio 1: 20-40; Padding method: the dosage (20% solids) 20-40g / l, 120 pre-bake, 150-180 stereotypes baking; Packaging and storage 50kg or 200kg plastic drums. Should be stored in a cool ventilated warehouse, to prevent exposure, storage period for half a year.
Basic Characteristics Appearance: slightly yellow transparence liquid Ionicity: Cationic PH value: 4.5-6.5 Solubility: can be can be dissolved in water at any ratio Hand feeling:instantly hydrophilic Features And Advantages This product is cationized amino and polyether modified multi-copolymer block silicone oil emulsion, especially suitable for processing all kinds of chemical fiber, cotton, wool and blended fabric, does not affect the fabric itself hydrophilic; no yellowing, suitable for bleaching or light-colored fabric; 1.This product is particularly suitable for processing cotton or polyester-cotton fabric, can achieve instantaneous hydrophilic effect, hand feeling general; 2.This product can be used as antistatic agent for chemical fiber fabric; cationic strong, and anion may occur coagulation, application before the need to do the application test, or add the company's specialty products anion and cation anti-coagulation agent; 3.high temperature resistance, suitable for a variety of processing technology, will not bring sticky roller, high suction rate; without APEO. Usage 1.This product is 50% solid content of high concentration emulsion, can be used directly, or better using after thinning,using after diluting at the recommended ratio1: 2.5 (20% solids) or 1 :5 (10% solids) , and adjust the PH value of acetic acid to 6-6.5; The speed should not be too fast, otherwise the bubble more; 2. After thinning, you can use exhausting method and continuous padding mothod: Exhausting method: the dosage (20% solids) 1-4% (owf), temperature 30-40 15-30min, bath ratio 1: 20-40; Padding method: the dosage (20% solids) 10-40g / l, 120 pre-bake, 150-180 stereotypes baking; Packaging and storage 50kg or 200kg plastic drums. Should be stored in a cool ventilated warehouse, to prevent exposure, storage period for half a year. -
Physical and chemical property: Appearance: Yellowish or Transparent Liquid Ionic properties: Slight Cation/Nonionic Solid content: 60 1% PH value (1% aqueous solution 20): 6-8 Product characteristics 1.Super smooth and soft 2.Especially suitable for polyester fabric and blends 3.Suitable for continuous process techniques, no stick roller 4.Without APEO Usage Method Diluted with water at ratio 1:5-7, self-emulsifying. Exhausting: recommended usage: 2--4% (O.W.F) Padding: 1540g/l The special process, please appropriate adjustments according to the samples. Package And Storage 200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 12 months of storage expiry.
Physical and chemical property: Appearance: Yellowish or Transparent Liquid Ionic properties: Slight Cation/Nonionic Solid content: 60 1% PH value (1% aqueous solution 20): 6-8 Product characteristics 1.Super smooth and soft 2.Especially suitable for polyester fabric and blends 3.Suitable for continuous process techniques, no stick roller 4.Without APEO Usage Method Diluted with water at ratio 1:5-7, self-emulsifying. Exhausting: recommended usage: 2--4% (O.W.F) Padding: 1540g/l The special process, please appropriate adjustments according to the samples. Package And Storage 200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 12 months of storage expiry.
Physical and chemical property: Appearance: Clear to yellowish Liquid Ionic properties: Cationic Active content: 60 1% Product characteristics: Soluble in cold water, impart surface smooth, inner soft and elasticity Super yellowing-resistant, shearing resistant and warm water washing Processing PH range from 1-11, high temperature 90C'-10C' resistant Improve sewing ability, especially suitable for cotton woven fabric Highly resistant to electrolytes, suitable for resin finishing Non-toxic to cellulase Usage Method: Padding recommended usage: 5-20g/l, 1g/l acetic acid as well Exhausting: 0.5%-2% (O.W.F), 20 minutes Adjust dosage according to different fabric and requirements Package and Storage: 200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 6 months of storage expiry.
Basic Characteristics Appearance: slightly yellow transparent liquid Ionic: slight cationic PH value: 4.5-6.5 Solubility: can be dissolved in water at any ratio Hand feeling: special soft, smooth Features And Advantages This product is the end of epoxy silicone oil and ammonia ether polymerization (solvent is ethylene glycol monobutyl ether, solvent content of 40%), and finally add the end of epoxy polyether chain derived multi-copolymer block silicone oil emulsion, especially suitable for processing polyester and wool fibers, feel the characteristics of special sponginess, good soft and smooth; also suitable for cellulose fiber, nylon and other blended fabric feel finishing; Mixed with M-100A and 9905A silicone oil products, especially suitable for a variety of polyester velvet, wool blankets, chemical fiber lace and other fabric feel finishing,Meet the needs of customers fluffy, soft and smooth comprehensive effect. Mixed with M-100A and 9906A silicone oil products, especially for poly-cotton, cotton knitted fabric finishing; Dilution and use the method This product is 50% solid content of high concentration emulsion, can be used directly, or better using after thinning, the recommended ratio can be diluted 1 : 2.5 (20% solids) or 1 :5 (10% solids) , do not need to adjust the PH value; After thinning, you can use exhausting method and continuous padding method, Exhausting method: the dosage (20% solids) 2-4% (owf), temperature 30-40 , 15-30min, bath ratio 1: 20-40; Padding method: the dosage (20% solids) 20-40g / l, 120 pre-bake, 150-180 Package And Storage 50kg or 200kg plastic drum.Should be stored in a cool ventilated warehouse, to prevent exposure, storage period of half a years.
Physical and chemical property: Appearance: Clear to yellowish Liquid Ionic properties: Cationic Active content: 60 1% Product characteristics: Soluble in cold water, impart surface smooth, inner soft and elasticity Super yellowing-resistant, shearing resistant and warm water washing Processing PH range from 1-11, high temperature 90C'-10C' resistant Improve sewing ability, especially suitable for cotton woven fabric Highly resistant to electrolytes, suitable for resin finishing Non-toxic to cellulase Usage Method: Padding recommended usage: 5-20g/l, 1g/l acetic acid as well Exhausting: 0.5%-2% (O.W.F), 20 minutes Adjust dosage according to different fabric and requirements Package and Storage: 200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 6 months of storage expiry.
