Plano Convex lens These lenses have positive focus length. Most suitable where one conjugate is more than five times, the other. e.g. in sensor application or for use with near collimated light. Also where both conjugates are on the same side of the lens, e.g. as an add-on lens to increase the numerical aperture. Capacity: Material: Optical glass, Fused silica lens, Silicon, Germanium, CaF2 Plano concave lens, MgF2 Plano concave lens, Sapphire, ZnSe, ZnS Diameter: 0.5 to 350 mm Diameter Tolerance: +0/-0.02 mm Thickness Tolerance: 0.01 mm Surface Quality: 10-5 Surface Figure: λ/10 Centration: 1 minute or 30 Second Coating: Uncoated, AR and HR Specification: Material BK7 or Fused Silica Design Wavelength 546.1 nm Design Index: BK7 1.5183 0.0005 Fused Silica 1.46008 0.00005 Diameter Tolerance +0.00, -0.15 mm Thickness Tolerance 0.2 mm Paraxial Focal Length 2% Centration 85% Surface Irregularity λ/4 632.8 nm Surface Quality 60-40 scratch and dig Protective Bevel 0.25 mm x 45 BK7 Plano-Convex Lens Standard Products: Part No. f (mm) Ф(mm) R1 (mm) Centration (arc minutes) t c (mm) t e(mm) f b(mm) TPX101 4.0 2.0 2.073 15 1.26 1.0 3.2 TPX102 5.0 3.0 2.592 10 1.48 1.0 4.0 TPX103 6.0 4.0 3.101 3 1.50 0.77 5.0 TPX104 8.0 6.0 4.15 3 3.3 2.0 5.8 TPX105 10.0 6.0 5.18 3 3.0 2.0 8.0 TPX106 15.0 12.7 7.78 3 5.3 2.0 11.5 TPX107 20.0 12.7 10.37 3 4.2 2.0 17.2 TPX108 25.4 25.4 13.17 3 11.7 2.0 17.7 TPX109 40.0 12.7 20.73 3 3.0 2.0 38.0 TPX110 50.0 25.4 25.92 3 5.3 2.0 46.5 TPX111 60.0 22.4 31.1 3 4.1 2.0 57.3 TPX112 80.0 30.0 41.46 3 4.8 2.0 76.8 TPX113 100.0 25.4 51.83 3 3.6 2.0 97.6 TPX114 100.0 50.0 51.83 3 9.4 3.0 93.8 TPX115 200 25.4 103.66 3 2.8 2.0 198.2 Note: Other material, size and coating are available upon request. Fused Silica Plano-Convex Lens Standard Products: Part No. f (mm) Ф(mm) R1 (mm) t c (mm) t e(mm) f b(mm) TPX120 6.0 4.0 2.76 1.66 0.8 4.86 TPX121 10.0 5.0 4.60 1.74 1.0 8.81 TPX122 8.0 6.0 3.68 2.55 1.0 6.25 TPX123 10.0 6.0 4.6 2.12 1.0 8.55 TPX124 15.0 12.7 6.9 6.2 2.0 10.8 TPX125 20.0 12.7 9.2 4.5 2.0 16.9 TPX126 30.0 12.7 13.8 3.6 2.0 27.5 TPX127 40.0 12.7 18.4 3.1 2.0 37.9 TPX128 50.0 25.4 23.0 5.8 2.0 46.0 TPX129 75.0 25.4 34.51 4.4 2.0 72.0 Note: Other material, size and coating are available upon request.
Achromat Lens Achromatic doublet lenses have significantly better optical performance than singlet lenses in visible imaging and laser beam manipulation applications. Achromat Lenses are consist of two elements, usually of a positive low-index crown glass cemented to a negative high-index flint glass that have been corrected for chromatic aberration with respect to two or more selected wavelengths. We provide achromatic lenses consisting of two elements. These lenses have considerably reduced not only chromatic aberration bust also spherical aberration and coma aberration. These are designed with respect to three wavelength 480.0nm, 546.1nm and 643.8nm. Capacity: Material: Optical glass. Diameter: 0.5 to 350 mm Diameter Tolerance: +0/-0.02 mm Thickness Tolerance: 0.01 mm Surface Quality: 10-5 Surface Figure: �/10 Centration: 1 minute or 30 Se ond Coating: Uncoated, AR and HR Specification: Material BK7 grade A optical glass Design Wavelength 480.0nm,546.1nm,643.8 nm Diameter Tolerance +0.0, -0.15 mm Thickness Tolerance �0.2 mm Paraxial Focal Length �2% @546.1 nm Centration 85% Surface Irregularity λ/4@632.8 nm Surface Quality 60-40 scratch and dig Protective Bevel 0.25 mm x 45� Positive Achromatic Lens Standard Products: Part No. f (mm) Ф (mm) R1 (mm) R2=R3 (mm) R4 (mm) tc1 (mm) t c2 (mm) f b (mm) Lens A Lens B TPA101 10.0 6.0 6.546 -4.055 -23.23 3.6 0.8 7.54 SK9 SF15 TPA102 20.0 10.0 12.32 -0.902 -25.23 3.8 1.0 17.625 BK7 SF5 TPA103 30.0 12.7 18.535 -13.49 -37.84 4.0 1.3 27.36 BK7 SF5 TPA104 40.0 12.7 25.23 -17.539 -48.75 3.4 1.3 37.778 BK7 SF5 TPA105 50.0 18.0 31.69 -22.0 -60.57 4.8 1.5 46.987 BK7 SF5 Note: Other size, material and coating are available upon request. Negative Achromatic Lens Standard Products: Part No. f (mm) Ф (mm) R1 (mm) R2=R3 (mm) R4 (mm) tc1 (mm) t c2 (mm) f b (mm) Lens A Lens B TNA101 -25 12.7 -15.6 13.09 44.16 3.0 2.67 -27.5 BK7 F2 TNA102 -40 12.7 -24.45 17.97 66.6 3.0 2.34 -42.5 BK7 F2 Note: Other size, material and coating are available upon request.
Cylindrical Lens Cylindrical lens is used to provide focusing power in one section only. For illumination or detection of light from line sources. Also used to anamorphic compression of beams and images. Especially widely used to anamorphic compression of LD (laser diode) output beam. Our cylindrical lens include fused silica cylindrical lens, CaF2 cylindrical lens, ZnSe cylindrical lens, ZnS cylindrical lens. Capacity: Material: Optical glass, Fused silica,CaF2, MgF2, Sapphire, ZnSe, ZnS Diameter: 0.5 to 350 mm Diameter Tolerance: +0/-0.02 mm Thickness Tolerance: 0.01 mm Surface Quality: 10-5 Surface Figure:/10 Centration: 1 minute or 30 Second Coating: Uncoated, AR and HR Specification: MaterialBK7 or Fused Silica Design Wavelength632.8nm Design Index: BK7n=1.5147 0.0005 Fused Silican=1.457020.00005 Surface Figurex: /2; y: 2 Diameter Tolerance+0.00, -0.15 mm ThicknessTolerance0.2mm Paraxial Focal Length2% Centration85% Surface Quality60-40 scratch and dig Protective Bevel0.25 mm x 45 BK7 Plano-Convex Cylindrical Lens Standard Products: Part No.XY (mm)f (mm)R1(mm)tc(mm)te(mm)fb(mm) TXC10110.0x10.012.76.544.32.09.8 TXC10220.0x10.012.76.544.32.09.8 TXC10310.0x10.020.010.293.32.017.8 TXC10420.0x10.020.010.293.32.017.8 TXC10510.0x10.025.012.873.02.023.0 TXC10620.0x10.025.012.873.02.023.0 Note: Other size,material and coatings are available upon request. BK7 Plano-Concave Cylindrical Lens Standard Products: Part No.XY (mm)f (mm)R1(mm)tc(mm)te(mm)fb(mm) TEC20110.0x10.0-12.76.544.32.0-14 TEC20220.0x10.0-12.76.544.32.0-14 TEC20310.0x10.0-25.012.873.02.0-26.3 TEC20420.0x10.0-25.012.873.02.0-26.3 Note: Other size,material and coatings are available upon request.
Reticule series Optical Lens Infrared Filter Geodetic Surveying series Grating, optical dial and various reticules are widely used in the geodetic surveying field. The geodetic surveying apparatus include total station, electronic theodolite, optical theodolite, laser rangefinder, automatic sight level, various field instruments, and large-scale and high-precision measuring equipment (such as satellite telemeter and aerial surveying apparatus). We produce various specifications of high-precision reticules and provide related services for each domestic and foreign measuring company, due to the high quality and competitive price, we built a well cooperation with many companies in the world. Measuring Sight series Our products have large coverage, wide variety, complicated figures and exquisite technique. The reticules we produce match the high accuracy sniping rifle telescopic sight, which is superb in numerous gun telescopic sight, they can be used in the daytime and be lighted at night. Medical Reticule series We can process and manufacture the key components for the surgical microscope, hemocytometer, medical microscope, nuclear magnetic resonance imaging apparatus, diopter inspection apparatus, and visual degree instrumentation, etc. With the powerful photomask-making technology, our products not only have high accuracy, but also have delicate designed figure. They make examination more reasonable, accurate and human. Telescope Reticule series We could produce many kinds of reticules from various kinds of reticules of Chinese-style telescope to German-style, American-style, Russian-style, Japanese-style and Czech-style telescopes; including regular flat surface chrome oxide reticule, night lighting etching reticule, transparency field reticule of bright background dark figure and night field reticule of high density dark background bright figure Line width8�m20�m, Line accuracy < �2 m, Surface defect disease: �grade, Density (D)> 3,Reflectivity( R) < 8%.
Aspherical lens Glass aspherical lens is also called condenser lens, mainly applicale for stage lighting, optical lighting system, etc. We ring in hot riquetting technology from japan, with volume production aility, including aspherical lens such as aspherical lens, 20 aspherical lens, pyrex aspherical lens which surface form error is within 00 micron. Specification: Material, 20 or pyrex Diameter range0-300mm Diameter tolerance+0.00/-0.5mm Center thicness+/-0.5% Focus+/-% Aspheric lens face formCheced y caliper Surface finish: processing surface/2; y: 2 Standard products: Part no.MaterialEflOdOd2CtEt Tca0208.5240.4.54 Tca02Pyrex3.50232.5 Tca03Pyrex36.452242 Tca04204.43530.680.052.3 Tca05Pyrex485092 Tca06Pyrex6.868.524.22 Tca0206.256.52.690.942 Tca08Pyrex26.554.252.8 Tca092090.805.243.8
Rod lens Rod Lens is designed for use in a variety of laser and imaging applications. The addition of this product line is part of a continued effort to support current trends toward miniaturization. Our rod lens include fused silica rod lens, MgF2 rod lens, ZnSe rod lens. Application: Optical Measurement System Projection Optics System Imaging Optics System Astronomical Optics Capacity: Material: Optical glass, Fused silica, CaF2, MgF2, Sapphire, ZnSe, ZnS Diameter: 0.2to 350 mm Diameter Tolerance:0.00/-0.002mm CylindricalSurfacefigure:2 @632.8nm (Standard), up to /4 @632.8nm Surface Quality: 10-5 Coating: Uncoated, AR and HR Please see our stock,you can find many standards rod lens.
Ball lens Spherical ball lenses are widely used in optical measurement systems, projection & imaging optical systems. Also for laser collimating and focusing, laser-to-fiber coupling, fiber-to-fiber coupling, and fiber-to-detector coupling. We provide all kinds of ball lens such as ZnS ball lens, fused silica ball lens, MgF2 ball lens and so on. Capacity: Material: Optical glass, Fused silica, Silicon, Germanium, CaF2, MgF2, Sapphire, ZnSe, ZnS Diameter: 0.2 to 500mm Diameter Tolerance: +0/-0.02 mm Sphericity:0.001mm Surface Quality: 10-5 Specification: MaterialBK7 grade A, B270, UV grade Fused Silica, Sapphire etc. Diameter Tolerance0.05mm (Standard), up to +0.000/-0.002mm Sphericity0.005mm (Standard), up t o +/-0.6um Surface Quality60-40 S/D (Standard), up to 20-10 S/D Coatinguncoated
Achromatic cylindrical lens optical glass material
Diameter: from 0.5mm to 2500mm,Surface Quality: 10-5 S/D... Material::BK7, fused silica, borofloate, CaF2, MgF2, Ge, Si, ZnSe, ZnS, SF, LaF, BaK... Coating: AR coating,Al/Au reflective coating,BBAR coating,DLC coating,Dielectric HR coating... Application: In the field of Defence,Imaging,medical,laser,sensor,Biochemical.. Features: Optical Dome Port Lenses provide protective boundaries while allowing for a clear view between two environments. An optical dome is a lens with two concentric spheres. Sometimes they are referred to as curved planar parallel plates. Benefits: Improved Optical Clarity: Glass optical domes provide superior optical clarity due to their high transmission capabilities in both the visible and infrared spectrums. They can also be coated with anti-reflective coatings to minimize the amount of light scattering and unwanted reflections, ensuring the transmission of higher-quality images. Durable and Stable: Glass optical domes are strong, stable, and long-lasting. They can withstand harsh weather conditions, such as heavy rain and strong winds, and extreme temperature fluctuations. As a result, glass optical domes are suitable for outdoor applications. Customizable Shapes and Sizes: Glass optical domes can be fabricated into various shapes and sizes, depending on the intended application. Glass optical domes can be molded or cut into custom shapes required for specific optical applications.
Lens: Diameter from 0.5mm to 2500mm,Surface Quality: 10-5 S/D... Material::BK7, fused silica, borofloate, CaF2, MgF2, Ge, Si, ZnSe, ZnS, SF, LaF, BaK... Coating: AR coating,Al/Au reflective coating,BBAR coating,DLC coating,Dielectric HR coating... Application: In the field of Defence,Imaging,medical,laser,sensor,Biochemical... Features: Germanium (Ge) Optical Components are used in many Infrared (IR) applications or systems, including thermal imaging, spectroscopy, or with monochromatic light sources such as quantum cascade lasers. German (Ge) Optical Components are Optical Components designed for high performance in the Infrared (IR) spectrum without the use of Infrared (IR) anti-reflection coatings. Germanium (Ge) Optical Components can range from Optical Lenses to Prisms or Optical Filters. Benefits: High transmission and low dispersion for superior image quality Precise focal length for accurate focus and optimal clarity Durable and rugged design for long-lasting performance Customizable mounting options for easy integration
Brewster window use the characteristics of total reflection property of the material. When the incident Angle (called brewster Angle of the material) is specified, the Polarization component of S in the incident light is partially reflected, while the P component is close to the full transmission.Sunday offers a variety of Brewster Windows based on UV-fused quartz for UV applications The high-precision window is made of BK7 optical glass and UV fused quartz, the fused silica quartz window plate is suitable for high power laser that needs good thermal stability, and the window made of N-BK7 material is cheaper, which is suitable for laser applications that pay more attention to cost.Both fused quartz and N-BK7 laser window plates have precision grades of 1/10 lambda surface flatness and 10-5, 20-10 surface quality to ensure minimal interference to the transmitted beam.Sunday Optics is specialized in the processing of precision optical window,We have four-axis polishing machine, large-size ring polishing machine, two-axis machine to manufacture high precison windows for customers. we can offer 24 inch zygo flatness reports, full CA 600mm windows.Brewster window use the characteristics of total reflection property of the material. When the incident Angle (called brewster Angle of the material) is specified, the Polarization component of S in the incident light is partially reflected, while the P component is close to the full transmission.Sunday offers a variety of Brewster Windows based on uV-fused quartz for UV applications Specifications Diameter 10mm to 127mm Diameter Tol. +/-0.02mm Material JGS1 Surface Quality 10-5 standard Flatness 1/10 lambda Parallisam
Zerodul Window with hole, we can achieve flatness
Sunday Optics is specialized in the processing of precision optical window,We have four-axis polishing machine, large-size ring polishing machine, two-axis machine to manufacture high precison windows for customers. The high-precision window is made of BK7 optical glass and UV fused quartz, the fused silica quartz window plate is suitable for high power laser that needs good thermal stability, and the window made of N-BK7 material is cheaper, which is suitable for laser applications that pay more attention to cost.Both fused quartz and N-BK7 laser window plates have precision grades of 1/10 lambda surface flatness and 10-5, 20-10 surface quality to ensure minimal interference to the transmitted beam.Sunday Optics is specialized in the processing of precision optical window,We have four-axis polishing machine, large-size ring polishing machine, two-axis machine to manufacture high precison windows for customers. we can offer 24 inch zygo flatness reports, full CA 600mm windows. Specifications Diameter 0.1mm to 1000mm Diameter Tol. +/-0.02mm Material Bk7 sapphire fused silica,ZnS2,CaF2,Si,Ge. Surface Quality 10-5 standard Flatness 1/10 lambda Parallisam
Sunday Optics provides many kinds of roof prisms including Schmidt Roof Prism Lehmann Roof Prism Abbe Roof Prism Penta Roof Prism and Combined Roof Prism, etc. Lehamann Prism Material: Optical glass, H-K9L, Quartz Size:5-300mm Angle Tolerance:3' Size Tolerance:+/-0.05mm Coating: AR BBAR Metal
Collimator Lenses is made of several lenses or single aspheric lens, are designed to collimate light to a desired diameter beam which can make a collimated and direct effect in laser instruments. Material N-BK7, L-BAL35, D lak6, D-ZK3 Diameter Tolerance 0.1mm, 0.01mm Center Thickness Tolerance: 0.1mm, 0.01mm Focal Length Tolerance 1 Clear Aperture 90 Surface Quality S D 60 40,40 20 Wavelength general 400-700nm or cuostmer requests Coating AR Ultraviolet UV, visible, or Infrared IR spectrums Application Laser collimating lenses Fiber collimating lenses Laser diode collimating lenses Laser level meter Dot laser device Throw line instrument Fiber collimation system
Sunday Optics offer 600mm size window with full CA test by 24 inches Zygo Interferometer The Standard Window Glass is N-BK7 or Fused Silica, but when manufacture,Fused Silica is more easy to keep its flatness stability. UV Fused Silica is better for UV wavelength, high power laser, the UV tranmission can be 185nm. BK7 Glass is aways used for visible light and near infrared, it is more economy and used for low laser as a protect window.Sunday Optics advantange is: within 600mm windows, we can offer full CA test reports, 1/10 lambda at 600mm is achieved. Specifications: Material BK7 K9 Fused Silica, Corning Fused Silica Size 1mm to 800mm Tolerance +/-0.01mm Parallisam
Sapphire has superior optical transmission qualities for ball lens and half ball lens. Ball lens is used to improve the signal coupling between optical fiber, transmitter and detector, improve the signal quality, and can also be used in endoscopy, bar code scanning, aspherical lens preprocessed materials, sensors, etc. The ball lens has a short focal length, which minimizes the distance needed to travel from the ball lens to the fiber. Ball lens commonly used in the optical fiber coupling, laser collimating device, Optical Measurement System, it has a shorter focal length and the characteristics of small size. Sunday produce ball lens, half ball lens, Super hemisphere ball lens, hollow ball lens.Sunday Optics can manufacture ball lens Minumum diameter 0.3mm.Sapphire has superior optical transmission qualities for ball lens and half ball lens. Sapphire Ball Lens Specifications: Material:Sapphire Size:0.3-50mm Surface Quality:80-50 Tolerance:+/-0.002mm Coating: AR Coating Ovality:+/-0.002mm Stock Size Part No. Structure Dia.(mm) Material SBS1 Ball lens 1mm Sapphire SBS2 Ball lens 2mm Sapphire SBS3 Ball lens 3mm Sapphire SBS4 Ball lens 4mm Sapphire SBS5 Ball lens 5mm Sapphire SBS8 Ball lens 8mm Sapphire SBS10 Ball lens 10mm Sapphire SBS12 Ball lens 12mm Sapphire SBS20 Ball lens 20mm Sapphire SBS50 Ball lens 50mm Sapphire SHBS1 Half ball lens 1mm Sapphire SHBS1 Half ball lens 5mm Sapphire SHBS1 Half ball lens 6mm Sapphire SHBS1 Half ball lens 10mm Sapphire SHBS1 Half ball lens 13mm Sapphire SHBS1 Half ball lens 24mm Sapphire SHBS1 Half ball lens 36mm Sapphire SHBS1 Half ball lens 40mm Sapphire
Beamsplitter is an optical element that divides a beam of light into two beams according to a certain ratio of reflection and transmission.In the usual laser optical system, lighting optical system, spectrometer optical system, beam splitter is a common optical element degree of transmission and reflection percentage, transmission and reflected light polarization state to carry out segmentation.We can offer the K9 broadband splitter plate elliptical, ultraviolet spectroscopic uv spectral wedge, calcium fluoride (CaF2) broadband infrared spectral wedge, zinc selenide (ZnSe) infrared broadband polarization spectral wedge, standard Cube beam spliiter, PBS, NPBS and other standard splitting optics.The function of depolarization splitting prism is to divide the incident light intensity according to a certain proportion of reflection and transmission, so it is an ideal splitter for controlling the application of laser beam.The function of a polarization spectroscope (PBS) is to divide incident light according to a certain percentage of reflected and transmitted light according to the corresponding polarization state of light. Conventional Beam splitter cube is consist of two right angle prisms. one of the cant face will be coated metal coating or medium which has good reflective. Other faces will be coated AR coating. Conventional Beam Splitter Cube Material H-K9L N-BK7 JGS1 Demenision 10mm 12.7mm 20mm 25.4mm 50.8mm or customized Demenision tol. +0.00/-0.05 Surface Quality 20-10 10-5 CA 90% Surface Flatness 1/10 lambda633nm Beam Deviation
Optical lens, optical filters and windows, prism, reticles and gratings..Diversified shipment ways, from factory to door, transportation: by sea, by air, by land or multi transportation, price term: exw, fob, cfr, cif, dap, ddp
Optical lens, prism, sylindrical lens, mirror, lens, window, filters, waveplate, polarizer.
