Plano Convex lens These lenses have positive focus length. Most suitable where one conjugate is more than five times, the other. e.g. in sensor application or for use with near collimated light. Also where both conjugates are on the same side of the lens, e.g. as an add-on lens to increase the numerical aperture. Capacity: Material: Optical glass, Fused silica lens, Silicon, Germanium, CaF2 Plano concave lens, MgF2 Plano concave lens, Sapphire, ZnSe, ZnS Diameter: 0.5 to 350 mm Diameter Tolerance: +0/-0.02 mm Thickness Tolerance: 0.01 mm Surface Quality: 10-5 Surface Figure: λ/10 Centration: 1 minute or 30 Second Coating: Uncoated, AR and HR Specification: Material BK7 or Fused Silica Design Wavelength 546.1 nm Design Index: BK7 1.5183 0.0005 Fused Silica 1.46008 0.00005 Diameter Tolerance +0.00, -0.15 mm Thickness Tolerance 0.2 mm Paraxial Focal Length 2% Centration 85% Surface Irregularity λ/4 632.8 nm Surface Quality 60-40 scratch and dig Protective Bevel 0.25 mm x 45 BK7 Plano-Convex Lens Standard Products: Part No. f (mm) Ф(mm) R1 (mm) Centration (arc minutes) t c (mm) t e(mm) f b(mm) TPX101 4.0 2.0 2.073 15 1.26 1.0 3.2 TPX102 5.0 3.0 2.592 10 1.48 1.0 4.0 TPX103 6.0 4.0 3.101 3 1.50 0.77 5.0 TPX104 8.0 6.0 4.15 3 3.3 2.0 5.8 TPX105 10.0 6.0 5.18 3 3.0 2.0 8.0 TPX106 15.0 12.7 7.78 3 5.3 2.0 11.5 TPX107 20.0 12.7 10.37 3 4.2 2.0 17.2 TPX108 25.4 25.4 13.17 3 11.7 2.0 17.7 TPX109 40.0 12.7 20.73 3 3.0 2.0 38.0 TPX110 50.0 25.4 25.92 3 5.3 2.0 46.5 TPX111 60.0 22.4 31.1 3 4.1 2.0 57.3 TPX112 80.0 30.0 41.46 3 4.8 2.0 76.8 TPX113 100.0 25.4 51.83 3 3.6 2.0 97.6 TPX114 100.0 50.0 51.83 3 9.4 3.0 93.8 TPX115 200 25.4 103.66 3 2.8 2.0 198.2 Note: Other material, size and coating are available upon request. Fused Silica Plano-Convex Lens Standard Products: Part No. f (mm) Ф(mm) R1 (mm) t c (mm) t e(mm) f b(mm) TPX120 6.0 4.0 2.76 1.66 0.8 4.86 TPX121 10.0 5.0 4.60 1.74 1.0 8.81 TPX122 8.0 6.0 3.68 2.55 1.0 6.25 TPX123 10.0 6.0 4.6 2.12 1.0 8.55 TPX124 15.0 12.7 6.9 6.2 2.0 10.8 TPX125 20.0 12.7 9.2 4.5 2.0 16.9 TPX126 30.0 12.7 13.8 3.6 2.0 27.5 TPX127 40.0 12.7 18.4 3.1 2.0 37.9 TPX128 50.0 25.4 23.0 5.8 2.0 46.0 TPX129 75.0 25.4 34.51 4.4 2.0 72.0 Note: Other material, size and coating are available upon request.