Safety factor: 5:1, 6:1, 7:1, 8:1;
Standard: EN1492-1:2000, JB/T8521-1997 and AUS1353.1-1997;
Length: 1m to 100m optional, special length may be upon request;
Color: International standard;
Rated load: 0.50t to 48.00t;
Width: 25mm to 300mm;
Body ply: 1ply to 4 plies.
YH series metallurgy electric hoist is a metallurgy crane equipment mainly used for lifting molten metal.
1. Capacity: 1-10t
2. Hoisting height: 9-40m.
3. Working grade: A3-A5.
4. The working environment temperature: -10° C~60° C.
5. Relative humidity: ≤ 50% under the condition of 40° C.
6. Protection functions: Double braking, double spacing, heat insulation plate and so on.
7. Usage:
(1)used together with LDY type metallurgy single girder crane;
(2)installed in suspending rail fixed in workshop to use individually.
8. Designing and manufacturing of metallurgy electric hoist meet the uirements of AQSIQ Doc# (2007) 375.
9. Other situations that lift fusion non-metallic material or hot solid metal also can refer.
Safe working load: 25kg
Directly mounted to the pvc slatwall panel, hassle-free when attaching and removing from slatwall
Perfect for garage, storeroom, securely holding your mountain bike in place and more
Attention: ensure proper installation before supporting weights
We mainly manufacture precision castings and deep-processed products made of stainless steel, carbon steel, alloy steel, nickel-based alloy and copper-base alloys. Etc.Which is near qingdao port. Our products include bruce anchor, folding anchor, denforth anchor, plough anchor, delta anchor, anchor chain, hinge & shower hinge, cleat, chocks, rigging(trunbuckle, shackle, hook), fitting(elbow, tee, cross), shaft, clamp, bracket, valve, pipe, impeller, spider, rail base, stanchion etc and machinery parts, architecture hardware. Also, we can manufacture according to customers drawings and samples.
1. Material: stainless steel 316, 304.Or according to you request.
2. Process: lost wax process, silicasol process casting.
3. Small order accepted
4. Make maching service as your requirements or drawings.
5. Surface treatment: mirror polishing. Electrico polishing, machining, machining center, plating, heat treatment.
6. Attractive appearance, lasting corrosion resistance
7. Customized samples or drawings are accepted.
We are warm welcome you to our factory for visit and further cooperation.
The hs series chain block is a portable lifting device easily operated by hand chain. It is suitable for use in factories, mines, farms, construction sites, wharves, docks and warehouses for installation of equipment, as well as for loading and unloading goods, it is specially advantageous for lifting work in open air grounds and places where no electric power supply is available.
The chain block can be attached to a trolley of any type as a travelling chain block.It is suitable to monorail overhead conveying system, hand travelling crane and jip crane.
Five prominent features in design and in service are in herent in hs series chain block:
1.Safety in operadon and easy maintenance
2.High emciency and small handpull
3.Light weight and easy handling
4.Fine appearance with small size
5.Durabilty in use.
The hs series chain block is a portable lifting device easily operated by hand chain. It is suitable for use in factories, mines, farms, construction sites, wharves, docks and warehouses for installation of equipment, as well as for loading and unloading goods, it is specially advantageous for lifting work in open air grounds and places where no electric power supply is available.
The chain block can be attached to a trolley of any type as a travelling chain block.It is suitable to monorail overhead conveying system, hand travelling crane and jip crane.
Five prominent features in design and in service are in herent in hs series chain block:
1.Safety in operadon and easy maintenance
2.High emciency and small handpull
3.Light weight and easy handling
4.Fine appearance with small size
5.Durabilty in use.
1) material:201, aisi304, aisi316, 316l, etc.
2) standard: us type g209, g210, g2130, g2150, g213, g215 , european type large bow and dee shackle, bs3032, din82101
3) size :from 4.8mm to22mm, 3/16 to 7/8inch.
4) feature: quality is good and price is acceptable.
Art. No Size Swl/t Weight
Mm In Ton Kg
Ms-501 4.8 3/16 0.09 0.014
Ms-502 6 1/4 0.15 0.028
Ms-503 8 5/16 0.25 0.049
Ms-504 9 3/8 0.40 0.073
Ms-505 12 1/2 0.60 0.180
Ms-506 16 5/8 0.80 0.420
Ms-507 19 3/4 1.00 0.720
Ms-508 22 7/8 1.50 1.180
1) material:201, aisi304, aisi316, 316l, etc.
2) standard: gb, din, us type
3) surface finish: highly polished
4) size :from 3.5mm to12mm.
5) feature: quality is good and price is acceptable.
Art. No D Will
Mm Kg
Ms-601 3.5 20
Ms-602 4 30
Ms-603 5 50
Ms-604 6 60
Ms-605 7 100
Ms-606 8 140
Ms-607 9 160
Ms-608 10 220
Ms-609 12 300
1) material:201, aisi304, aisi316, 316l, etc.
2) standard: jis, din 1480 and us type with eye, hook&jaw.
3) size :from 6mm to 1 2/2inch.
4) surface treatment: precision polished.
5) feature: quality is good and price is acceptable.