YH series metallurgy electric hoist is a metallurgy crane equipment mainly used for lifting molten metal. 1. Capacity: 1-10t 2. Hoisting height: 9-40m. 3. Working grade: A3-A5. 4. The working environment temperature: -10° C~60° C. 5. Relative humidity: ≤ 50% under the condition of 40° C. 6. Protection functions: Double braking, double spacing, heat insulation plate and so on. 7. Usage: (1)used together with LDY type metallurgy single girder crane; (2)installed in suspending rail fixed in workshop to use individually. 8. Designing and manufacturing of metallurgy electric hoist meet the uirements of AQSIQ Doc# (2007) 375. 9. Other situations that lift fusion non-metallic material or hot solid metal also can refer. Plywood Box Inside.
Mobile lifting jib crane has designed to be highly mobile, for flexible workstations. The foundation should be flat, so the entire crane can travel quickly and easily with a forklift or an overhead crane. The mobile jib crane is a high-quality lifting device for the loading capacity range from 125 to 1000 kg. This mobile jib crane is often used for machine repair and modifications or for temporary installation of new workstations. Specification Model number: bzy Arm length : customized Capacity: 125-1000kgs Lifting height: customized Certification: iso 9001 gb/t8906-2014 Working system: a3 Lifting speed: 0.8/8m/min Slewing angle: 180/270/360 degree Power source: three-phase ac 380v 50hz or other Warranty :12 month Mobile jib crane application 1. The most common applications for jibs are individual workstations; machine tools, welding/fabrication stations, and some small assembly stations. 2. They are also often used in simple loading / unloading operations where it is not necessary to spot a load precisely. 3. Jib cranes most often handle lighter loads at lower duty cycles than their bridge and gantry crane counterparts. 4. If there is a need for precise locating of heavy loads, a large area of hook coverage, or frequent use for heavy loads, the jib crane may not be the best solution.
Wire rope electric hoist application 1. Cd and md wire rope electric hoist is small type lifting equipment, which can be installed on single beam overhead crane, single beam gantry crane, jib crane or i-beam. 2. Cd wire rope electric hoist lifting speed is 7 m/min, md wire rope electric hoist has two lifting speed: 0.7 m/min and 7 m/min. 3. Working conditions: * ambient temperature should be no more than 40 oc. * controlled by push button or remote with vvvf. * forbidden to use in easily combustible, explosive, corrosive, electromagnetic, electric hoist, melting metal, overloading and dust works. 4. Wire rope electric hoist specification: Loading capacity: 0.25 ~ 80t Lifting height: 3 ~ 50m Lifting speed: 0.3 ~ 8m/min Power supply: 220 ~ 440v, 50/60hz, 3phase Wire rope electric hoist features 1.Compacted structure, save the space 2.Aluminum alloy body, low self weight 3.Free-maintenance design, interchangeable of components; 4.The gear transmission was harden treatment, low noise, environmentally friendly 5.The waste spare parts wonâ??t make a destory to surrounding environment 6.Convenienct installation flexible operation.
The column mounted jib crane is composed by the vertical shaft, revolving arm, rotating shaft, hoist etc. The bottom of the vertical shaft is fixed on the concrete base. Horizontally rotation of the revolving arm: manual, depend on the operator use the human force to push the impending working or self prepared rope etc device. The hoist travel right and left straight on the h beam with the hoist to lift the heavy materials. The jib crane is suitable to work in the dock, warehouse, workshop etc fixed working conditions, it can work within the 360 degrees to lift, move and materials handling. Feature Simple structure, light dead weight. Install the rain cover to protect the electric hoist. 360 angle for rotating, or as your requirement. Including the safety system, like emergency stop device, etc. Two control types: ground handle and wireless remote. Safety system 1. Weight overload protection device 2. Top quality long time bearing polyurethane materials buffer 3. Crane traveling limit switch 4. Voltage lower protection function 5. Emergency stop system 6. Current overload protection system and so on Technical parameter Modelbzd1bzd2bzd3bzd5bzd6bzd8bzd10 Lift capacity (t)12356810 Horizontal throw (m)5.5-10.55.5-10.55.5-10.55.3-10.35.3-10.35.2-10.25.2-10.2 Radius of gyration (m)7-127-127-127-125-105-105-10 Angle of revolution180/270/360 Lift height (m)3-5 Lift speed (m/min)8/2, 4/1 Travel speed (m/min)20 Power supplythree-phase a.C. 380v, 50hz (as your demand)
Product Detail MH model rail mounted single girder electric hoist gantry crane with electric hoist is applied outside warehouse or railway sideways to do common lifting and unloading works. This kind of crane is composed of bridge, support legs, crane travelling organ, trolley, electric equipment,strong lifting electric hoist. The frame adopts box-type welding mechanism. Crane travellilng mechanism adopts separate driver. Power is supplied by cable or slide wire. there are different capacity single beam gantry crane for your choice according to your different use.It's widely used in factories, workshop, shipyard, port, etc. The capacity is from 1 to 30 tons, the working class is light ISO A3 grade. All movements of the crane are controlled by pendant control or wireless remote control. Features 1. Reasonable structure, Favorable performance, low noise. 2. Smooth starting and stopping,Overload protection. 3. Convenient maintenance,Electricity saving. 4. Excellent exchangeability for parts and components. 5. Protective earthing.Main lifting motor with thermal protection. 6. Emergency switch can stop all movement when any dangerous happened. 7. Sub-assemblies characteristic are tested before assemly. 8. All cranes must be preassmebled and tested before leaving factory KF CRANE is a professional production of heavy overhead crane manufacturer, overhead crane was hung in workshops, warehouses and material lifting field empty for material lifting equipment. Because of its ends situated in the tall concrete pillars or metal stent, shaped like a bridge. Email:sales66@chn-crane.com Price:Get Latest Price Min. order:1 Piece Trade Terms:FOB, CFR, CIF, EXW Payment Terms:L/C, T/T, Paypal, Money Gram
1.5 ton electric chain hoist with manual trolley Description of product as follows: 1. Lifting electric motor cover It made of high strength and light aluminum alloy but hard and fit for the use in the terrible work environment with a high heat dissipation rate and all tightness design. 2. Inverse phase sequence protecting device: It is the special electrical installation, which control the circuit not to work in case of wiring error in the power supply. 3. Limit switch: The limit switch device is installed where the weight is lifted on and off to make the motor to stop automatically so as to prohibit the chains from exceeding for safety. 4. 24V/36V device: Lifting Speed 8.8m/min Limit Switch yes Phases 3 Rotation speed 1440r/min Frequency 50hz/s Voltage 200v-480v Power 3.0Kw I-Beam 82mm-153mm KF CRANE is a professional production of heavy overhead crane manufacturer, overhead crane was hung in workshops, warehouses and material lifting field empty for material lifting equipment. Because of its ends situated in the tall concrete pillars or metal stent, shaped like a bridge. Email:sale886@chn-crane.com Skype:Erinkfcrane
Single girder overhead crane description Single girder overhead crane runs on an elevated runway system along the length of a factory, the hoist moves the load up and down, and the bridge of the crane moves the load forward and backward. It is characterized by more reasonable structure and higher strength steel as a whole, the main beam and end carriage are made by U-section steel plate. It is used together with CD1/MD1 model or HC/HM model wire rope electric hoist as a complete set. Widely used in plants, warehouses, material stocks to lift goods. It is prohibited to use the equipment in the combustible, explosive to corrosives environment. Single girder overhead crane classification LDA type single girder overhead crane * It is widely used in warehouse, plant, material stock to lift the goods. * Capacity: 1ton-20ton * Span: 7.5m-28.5m * Lift height: 3m-30m * Working with CD1 OR MD1 electric hoist LX type single girder overhead crane * It is a light duty track traveling crane with railway, which applies to be used in the matching assembling site and warehouse. * Capacity: 0.5ton-10ton * Span: 6m-31.5m * Lifting height: 6m-18m * Working with CD1 or MD1 electric hoist LDP type single girder overhead crane * It belongs to very low clearance light duty equipment. * Electric hoist is at the side of the main girder, so it will increase service space of hook and reduce the cost, so it is widely used in the situation of low headroom workshop. * Capacity: 1ton-20ton * Span: 6m-31.5m * Lifting height: 6m-18m * Working with CD1 OR MD1 electric hoist European type single girder overhead crane * It compact lifting machinery designed and manufacturing in the strict according with FEM and DIN standard, which is advanced technology and beautiful design. * Capacity: 1ton-20ton * Span: 6m-31.5m * Lifting height: 6m-18m * Working with European type electric hoist * Electric Hoist 10 T Overhead Crane Workshop Bridge Crane Lifting System z
Single Girder Beam Bridge Overhead Crane European type cranes have such design concepts as small dimension, light dead weight. Compared with traditional cranes, the limiting distance is minimum from hook to wall, and headroom is the lowest, which makes cranes work more close to the front, and lifting height more higher that increases effective working space of workplace. Capacity: 1ton-20ton Span: 6m-31.5m Lifing heihgt: 6m-18m Working grade: A3-A5 Working temperature: -25 to +42 centigrade Three control methods: Pendent control: A. Easy operation when obervation. B. Convenient to communication with other workers. Wireless remote control: A. Greatly improved the work efficiency. B. Keep the operator from danger. Cabin room control: A.Designed by Man-machine engineering principle B.The driver seat has adjustable height and rotation. Product classification Because single girder overhead crane divides into four types, here are the detailed information, if you are interested in any one, please let us know. LDA type single girder overhad crane is widely used in warehouse, plant, matrerial stock to lift the goods. Capacity: 1ton-20ton Span: 7.5m-31.5m Lifing heihgt: 6m-18m Working with CD1 OR MD1 electric hoist European type single girder overhead crane is compact lifing manchinery designed and manufacturing in the strict accoring with FEM and DIN standard, which is advanced technology and beautiful design. Capacity: 1ton-20ton Span: 6m-31.5m Lifing heihgt: 6m-18m Working with European type electric hoist LDP single girder overhead crane belongsto very low clearance light duty equipment. Electric hoist is at the side of the main girder, so it will increase service space of hook and reduce the cost, so it is widely used in the situation of low headroom workshop. Capacity: 1ton-20ton Span: 6m-31.5m Lifing heihgt: 6m-18m Working with CD1 OR MD1 electric hoist LX single girder overhead crane is a light duty track traveling crane with railway, which applies to be used in the matching assembling site and warehouse. Capacity: 0.5ton-10ton Span: 6m-31.5m Lifing heihgt: 6m-18m Working with CD1 or MD1 electric hoist
Overhead Crane Specification 1. Load capacity: 1 t to 50 t 2. Span: 10.5 m - 33 m 3. Lifting Height: 6 m - 20m 4. Structure: Box structure type 5. Certification: CE, ISO 9001 6. Power Supply: 380V, 50HZ, 3 Phase 7. Standard: GB/T 24001-2004 Single Girder Overhead Crane Description Single girder European overhead crane is special designed for low headroom heavy load handling application. Improved hoist trolley so that lifting mechanism and trolley traveling are at same level, saving more height for lifting. This structure highly solves the problem lifting cargo in low roof clearance workshop or warehouse. Single girder overhead crane adopts European advanced technology, designed based on international standard: FEM (Europe), DIN (Germany), ISO(International), The configurations are very advanced, such as Schneider electrical, ABM/Nord / SEW triple gear motor (three in one: motor, gear box, brake), galvanized high strength wire rope, self-adjusted disk brake, hard tooth reducer, programmable lifting limit switch, and so on. This Europe style overhead crane is of remote control with single cable "C" track festoon system; normally, we use Europe Realm (OHM) brand Compared with the general LD bridge crane, its weight is reduced about 15-30%, the maximum wheel pressure is reduced by about 10-35%, based on assimilating advanced technology,the single girder overhead crane takes modular design theories, modern computer technology, new material and technology and has features in strong rigidity, light dead weight, low power, outstanding design, save energy and environment protection. Single girder overhead crane can be applied in machinery production, assembling, petrochemicals, warehouse logistics, electric power construction, paper making and railways, etc. Single Girder Overhead Crane Feature 1. Increase the lifting height, Working in low headroom without enough space above the main girder 2. Low dead weight of computerize optimized box section 3. Aluminum alloy made drum shell, light weight, corrosion resist 4. Lifting drive units complete seal lubricate design, free maintenance 5. Traveling and lifting motors use closed type transmission gear, low noise, maintenance free 6. Modularized electrics, multiple protection, safe operation 7. Sensitive limit switch, automatically stop lifting and traveling when reach distance limit
