Tire patch is tire repair material what with normal temperature and higher temperature to vulcanizing. It is advance technology and top-quality. The patch has two- way by function. Its one of the best materials in the same area. One side could be self-vulcanizing through solution or stated temperature. Another side could be completely vulcanizing in the high temperature or vulcanize. It applies to renew or other vulcanizing process. Therefore this repairing means is safe and permanent. Our tire repairing materials can be used to vulcanize at normal temperature and high temperature, with advanced technology and top quality. Size;25mm
The tire file new hair chi, wipe on glue, wait some minutes, the cold fill on the metal film tear, can be directly with tire. Size:1025:25mm*25mm
Tyre patch, repair patch, bias repair patch, radial repair patch.
The used tricone bits are much more cheaper than the new ones because of the cost is low, but the quality is promised. 30*35*40cm 45kg
The tyre sealer inflator valve is an essential automotive accessory designed to provide a convenient and efficient solution for dealing with tyre punctures and maintaining proper tyre pressure. It combines the functions of tyre sealing and inflation in one compact device, making it a must-have for vehicle owners on the go.
Tire valve, wheel weights, tire seal plug, tire patch, tire repair tools.
Bit specification Bit type 8 1/2gs1904tc Iadc code S223 Blade 4 Cutter size (mm) Φ19mmï¼?î¦16mmï¼?î¦13mm Cutter qty Φ19ã?26ï¼?î¦16ã?1ï¼?î¦13ã?14 Nozzle qty 6nz Gauge length (mm) 100 Connection 4-1/2" api reg N.W./g.W. (kg) 54/69 Nozzle size(inch) 10/32ï¼?11/32 Greatâ pdcâ bitâ advantageâ   equippedâ forâ performanceâ â greatâ pdcâ bitsâ areâ equippedâ with 1.Highâ abrasionâ tungstenâ carbideâ material, â hardenedâ alloyâ steelâ baseâ material 2.Highâ performanceâ pdc-cutters 3.Carbideâ andâ diamondâ gaugeâ protection 4.Carbide/diamondâ shockâ studs 5.Threadedâ orâ plainâ carbideâ nozzlesâ forâ flushing  aboveâ featuresâ areâ subjectâ toâ changesâ andâ modificationsâ accordingâ toâ customers'â requirements. Our service: 1ã?�24 hour uninterrupted serviece, answer your questions in a timely manner 2ã?�warm welcome guests to visit 3ã?�one of the largest manufacturer and supplier in asia.High technology, high quality 4ã?�flexible production 5ã?�sincerely cooperate with you 6ã?�service to customer satisfaction -
BIT SPECIFICATION Bit Type 7-1/2" GS1606T IADC Code S423 Blade 6 Cutter Size (mm) Φ16MM;Φ13MM Cutter Qty Φ16�33;Φ13�25 Nozzle Qty 6NZ Gauge Length (mm) 60 Connection 4-1/2" API REG N.W./G.W. (KG) 45/60 Nozzle Size(inch) 18/32
SSAW pipe use to petrochemical industry Company Hebei Borun Steel Trade Co., Ltd Product Name SSAW steel pipe Outside Diameter 219.1 2540mm (8â?³ -100â?³) Wall Thickness 6mm 25.4 mm Length 6-13m Steel Grade Q235, Q345, A53, L245, L290, API 5L GR B, X42 ,X46, X70, S355, S275, S235 End Plain, Beveled Surface Treatment light-oiled, black painting , hot galvanizing, sand blasting, FBE, 2PE, 3PE etc Packing in bulk due to big sizes TPI SGS, BV, MOODY, CCIC Details of surface treatment Single-Layer FBE Coating SY/T 0315-2005, CAN/CSA Z245.20-2010, DEP 31.40.30.32-Gen-2011, ISO 21809-2-2007, API RP 5L9-2001 Double-Layer FBE Coating Q/CNPC 38-2002, CAN/CSA Z245.20-2010 2LPE/2LPP Coating SY/T 0413-2002, GB/T 23257-2009, ISO 21809-1-2009 3LPE/3LPP Coating SY/T 0413-2002, GB/T 23257-2009, DIN 30670-1991, CAN/CSA Z245.21-2010, ISO 21809-1-2009, NF A49-711-1992, NF A49-710-1988 Insulation Coating SY/T 0415-1996, CJ/T 114-2000, EN 253-1994 Application SSAW steel pipe is typically used to transfer gas, oil, or water Main Market South and East Asia, Middle East, Europe and America Contact Info Contact name:Jenna Yan Tel:8603175501333 E-mail:Sales2@brsteel.org Skype:Steel-Jenna Whatsapp:+8613292790570 Wechat:brsteelsales2 Linkedin:https://www.linkedin.com/in/jenna-yan-steel-pipe-trading-10843b16a/ Other products Seamless pipe,OCTG(API 5CT Casing pipe/Coupling/Tubing),ERW/LSAWsteel pipe,Hollow section pipe,Galvanized steel pipe Our company has 15 yearsexperience of steel trading!Hope to establish business with you!
SSAW pipe used for urban construction Company Hebei Borun Steel Trade Co., Ltd Product Name SSAW steel pipe Outside Diameter 219.1 2540mm (8â?³ -100â?³) Wall Thickness 6mm 25.4 mm Length 6-13m Steel Grade Q235, Q345, A53, L245, L290, API 5L GR B, X42 ,X46, X70, S355, S275, S235 End Plain, Beveled Surface Treatment light-oiled, black painting , hot galvanizing, sand blasting, FBE, 2PE, 3PE etc Packing in bulk due to big sizes TPI SGS, BV, MOODY, CCIC Details of surface treatment Single-Layer FBE Coating SY/T 0315-2005, CAN/CSA Z245.20-2010, DEP 31.40.30.32-Gen-2011, ISO 21809-2-2007, API RP 5L9-2001 Double-Layer FBE Coating Q/CNPC 38-2002, CAN/CSA Z245.20-2010 2LPE/2LPP Coating SY/T 0413-2002, GB/T 23257-2009, ISO 21809-1-2009 3LPE/3LPP Coating SY/T 0413-2002, GB/T 23257-2009, DIN 30670-1991, CAN/CSA Z245.21-2010, ISO 21809-1-2009, NF A49-711-1992, NF A49-710-1988 Insulation Coating SY/T 0415-1996, CJ/T 114-2000, EN 253-1994 Application SSAW steel pipe is typically used to transfer gas, oil, or water Main Market South and East Asia, Middle East, Europe and America Contact Info Contact name:Jenna Yan Tel:8603175501333 E-mail:Sales2@brsteel.org Skype:Steel-Jenna Whatsapp:+8613292790570 Wechat:brsteelsales2 Linkedin:https://www.linkedin.com/in/jenna-yan-steel-pipe-trading-10843b16a/ Other products Seamless pipe,OCTG(API 5CT Casing pipe/Coupling/Tubing),ERW/LSAWsteel pipe,Hollow section pipe,Galvanized steel pipe Our company has 15 yearsexperience of steel trading!Hope to establish business with you!
SSAW pipe used for building bridge Company Hebei Borun Steel Trade Co., Ltd Product Name SSAW steel pipe Outside Diameter 219.1 2540mm (8â?³ -100â?³) Wall Thickness 6mm 25.4 mm Length 6-13m Steel Grade Q235, Q345, A53, L245, L290, API 5L GR B, X42 ,X46, X70, S355, S275, S235 End Plain, Beveled Surface Treatment light-oiled, black painting , hot galvanizing, sand blasting, FBE, 2PE, 3PE etc Packing in bulk due to big sizes TPI SGS, BV, MOODY, CCIC Details of surface treatment Single-Layer FBE Coating SY/T 0315-2005, CAN/CSA Z245.20-2010, DEP 31.40.30.32-Gen-2011, ISO 21809-2-2007, API RP 5L9-2001 Double-Layer FBE Coating Q/CNPC 38-2002, CAN/CSA Z245.20-2010 2LPE/2LPP Coating SY/T 0413-2002, GB/T 23257-2009, ISO 21809-1-2009 3LPE/3LPP Coating SY/T 0413-2002, GB/T 23257-2009, DIN 30670-1991, CAN/CSA Z245.21-2010, ISO 21809-1-2009, NF A49-711-1992, NF A49-710-1988 Insulation Coating SY/T 0415-1996, CJ/T 114-2000, EN 253-1994 Application SSAW steel pipe is typically used to transfer gas, oil, or water Main Market South and East Asia, Middle East, Europe and America Contact Info Contact name:Jenna Yan Tel:8603175501333 E-mail:Sales2@brsteel.org Skype:Steel-Jenna Whatsapp:+8613292790570 Wechat:brsteelsales2 Linkedin:https://www.linkedin.com/in/jenna-yan-steel-pipe-trading-10843b16a/ Other products Seamless pipe,OCTG(API 5CT Casing pipe/Coupling/Tubing),ERW/LSAWsteel pipe,Hollow section pipe,Galvanized steel pipe Our company has 15 yearsexperience of steel trading!Hope to establish business with you!
BIT SPECIFICATION Bit Type 6 � GM1304TZ IADC Code M233 Blade 4 Cutter Size (mm) Φ13MMï¼ Î¦10MM Cutter Qty Φ13à 27ï¼ Î¦10à 4 Nozzle Qty/Type 4NZ Gauge Length (mm) 76 Connection 3-1/2 � API REG N.W./ G.W.(KG) 27/37 Nozzle Size (inch) 14/32 Great PDC bit Advantage Equipped for Performance Great PDC Bits are equipped with 1.High Abrasion tungsten carbide material, Hardened Alloy Steel base material 2.High performance PDC-Cutters 3.Carbide and Diamond gauge protection 4.Carbide/Diamond Shock Studs 5.Threaded or Plain Carbide Nozzles for Flushing Above features are subject to changes and modifications according to customers' requirements. Our Service: 1 24 hour uninterrupted serviece,answer your questions in a timely manner 2 Warm welcome guests to visit 3 One of the largest manufacturer and supplier in Asia.High technology,high quality 4 Flexible production 5 sincerely cooperate with you 6 Service to customer satisfaction
BIT SPECIFICATION Bit Type 6 ?� GS1306T IADC Code S433 Blade 6 Cutter Size (mm) Φ13MM Cutter Qty Φ13�62 Nozzle Qty 3NZ+3P Gauge Length (mm) 50 Connection 3-1/2 ?� API REG N.W./G.W. (KG) 23/33 Nozzle Size(inch) 16/32 GREAT PDC bit Advantage Equipped for Performance Great PDC Bits are equipped with 1.High Abrasion tungsten carbide material, Hardened Alloy Steel base material 2.High performance PDC-Cutters 3.Carbide and Diamond gauge protection 4.Carbide/Diamond Shock Studs 5.Threaded or Plain Carbide Nozzles for Flushing Above features are subject to changes and modifications according to customers' requirements. PDC bits ,diamond bits ,PDC drilling bits ,diamond PDC bits ,Application Water well ,Petroleum & Gas ,Water well ,mining and tectonic industries ,Oil field, Construction, Geothermal, directional boring, and underground foundation work. GREAT BIT CHARACTER 1. Force balanced, resist impact to the blade during high-speed drilling, to make bit work stable. 2. Plus wear knot section, reduce collision in the high-speed rotational vibration. 3. Patented matrix formulation, extended bit life. 4. Optimal hydraulic design, easy to move out the drill cuttings and cooling. 5. Equipped with back reaming teeth. 6. The cutter is high performance to increase the ability of anti-impact and anti-abrasive Our Service: 1 24 hour uninterrupted serviece,answer your questions in a timely manner 2 Warm welcome guests to visit 3 One of the largest manufacturer and supplier in Asia.High technology,high quality 4 Flexible production 5 sincerely cooperate with you 6 Service to customer satisfaction
BIT SPECIFICATION Bit Type 6� GS1304TZ IADC Code S233 Blade 4 Cutter Size (mm) Φ13MM Cutter Qty Φ13�39 Nozzle Qty/Type 4NZ Gauge Length (mm) 76 Connection 3-1/2� API REG N.W./ G.W.(KG) 27/37 Nozzle Size (inch) 16/32 GREAT PDC bit Advantage  Equipped for Performance Great PDC Bits are equipped with 1.High Abrasion tungsten carbide material, Hardened Alloy Steel base material 2.High performance PDC-Cutters 3.Carbide and Diamond gauge protection 4.Carbide/Diamond Shock Studs 5.Threaded or Plain Carbide Nozzles for Flushing
BIT SPECIFICATION Bit Type 8-1/2" GS1305ST IADC Code S433 Blade 5 Cutter Size (mm) Φ13MM Cutter Qty Φ13Ã?61 Nozzle Qty 5NZ Gauge Length (mm) 55 Connection 4-1/2" API REG N.W./G.W. (KG) 45/60 Nozzle Size(inch) 22/32 PDC bits ,diamond bits ,PDC drilling bits ,diamond PDC bits ,Application Water well ,Petroleum & Gas ,Water well ,mining and tectonic industries ,Oil field, Construction, Geothermal, directional boring, and underground foundation work. GREAT BIT CHARACTER 1. Force balanced, resist impact to the blade during high-speed drilling, to make bit work stable. 2. Plus wear knot section, reduce collision in the high-speed rotational vibration. 3. Patented matrix formulation, extended bit life. 4. Optimal hydraulic design, easy to move out the drill cuttings and cooling. 5. Equipped with back reaming teeth. 6. The cutter is high performance to increase the ability of anti-impact and anti-abrasive Our Service: 1ã?�24 hour uninterrupted serviece,answer your questions in a timely manner 2ã?�Warm welcome guests to visit 3ã?�One of the largest manufacturer and supplier in Asia.High technology,high quality 4ã?�Flexible production 5ã?�sincerely cooperate with you 6ã?�Service to customer satisfaction Contact us: Facebook:13127338525 twitter:13127338525 Whatâ??s App:13127338525 Skype:2479738546@qq.com email:2479738546@qq.com Linkedin:zryqueen@163.com (Ivy Zhang)
Our product We have three colours bricks, red, grey and white. Our bricks are handmade and machine made, are sintered by natural clay material, so the fireproof effect of this kind of brick is very good. The size of bricks is 240*55*20mm, but we can cut the brick according to the customer's needs. Our products use machine slice technology to slice the whole brick, divided into brick skin and brick core, as well as triangular brick and corner brick. This kind of bricks can be used to decorate the wall of cafes, houses, hotel and so on. If you need a lot, the price can be negotiated again. Our product Cangzhou Shiyi building materials Co., Ltd. is engaged in the production of old bricks.We have our own factories and warehouses. we have hundreds of years old brick sliced and sold at home and abroad. Old bricks are natural handmade products, which are free from pollution and relieve the pressure of modern environmental protection. It also helps to inherit excellent traditional culture and traditional crafts. Where can use: Exterior wall and interior wall For what usage: Antique clay bricks are used for wall decoration Material: Natural clay materials Applying place: Apartment,Hospital,University,Railway Station,Mall,Hotel,etc Extrude way: Antique clay bricks are from molded Feature: Acid-resistant,Antibacterial,Heat Insulation,Non-slip,Firebrick,Wear-resistant Certificate: Our antique clay bricks have passed ISO9001:2008 quality system Colors: Red, white, grey Packaging Cartons box with strong wood pallets. Size(L*W*H): 240*55*20mm or cut according your needs Advantages 1. Many years experience in old brick baking industry, knowing the markets 2. Direct professional building materials manufacturer, well controlling production, quality and delivery 3. Experienced sales, many years in export industry, so we have a lot of experience. 4. Well-trained processing workers and experienced craftmen, thanks to over 50 years of bricks export in our region. 5. Competively lower costs in labour, inland transportation and material. Welcome to contact with us for further information. Regular package 60pieces/carton 0.5kg/piece Packing is on pallet or carton as the pictures, we also can pack according to your reply Delivery time 5 to 10 days from the day of deposit
Used Concrete Pump Description: Used concrete pumps in stock, our pumps in very good condition and good price, any inspection welcome, Putzmeister, Sany, Zoomlion etc. please contact us for details. Work with us you can get: 1. Ensured products quality, before shipping we have strictly quality control, if any quality problem we will solve the problem first and give compensation. 2. Reasonable prices, we promise the same quality products we give the best price, same price we provide the best quality products. 3. Professional service, all our staff are very professional of both products and exporting, you will save much time to work with us and no need to worry a bout anything. Price Delivery Port : Tianjin Packaging & Delivery Delivery Lead Time : within 3 daysSupply Ability : As per request
.Equipment technical pamameter: 1. Component Decoiler , main roll forming system, pressing device, cutting device, hydraulic station, plc control 2. The general machine parameter Suitable roll forming material Color steel sheet or galvanized steel sheet Machine sizes 7000 1300 1200mm Main motor power 3kw with cycloidal reducer Hydraulic station power 4kw Roll forming thickness 0.25mm~0.8mm Diameter of forming principal axis î¦70mm Forming material expand width 1000mm Roll forming electric tension 380v 3phase 50hz or as the customer's requirements Material of forming roller High grade 45# forged steel plated with hard chrome plating Roll forming speed 6-8m/min Material of cutting cr12 mould steel with quenched treatment Kind of drive 0.6 inch chain link bearing model 6210 Roll rows 13 rollers 3. Service We provide the technical support for whole life. If any parts go broken and not artificial damage, we will send you new ones for free. We will arrange the technician to go abroad if its necessary. But the buyer should take all the cost, including visa, roundtrip ticket, Suitable accommodation and pay the service fee to the technician with $50/day. 4. The production process Decoilerflatingfeeding & punchingformingcut-to-length colletion (finished goods) 5. Payment T/t( 30% by t/t in advance, the rest 70% to be payed by t/t after you inspect the machine In seller's factory before delivery ), l/c 6. About us Our company have the series of coloured steel roll forming machine, Including moding machine, concealed roof sheeet machine, flat sheet bending machine and so on.
SSAW pipe used for building bridge Company Hebei Borun Steel Trade Co., Ltd Product Name SSAW steel pipe Outside Diameter 219.1 2540mm (8â?³ -100â?³) Wall Thickness 6mm 25.4 mm Length 6-13m Steel Grade Q235, Q345, A53, L245, L290, API 5L GR B, X42 ,X46, X70, S355, S275, S235 End Plain, Beveled Surface Treatment light-oiled, black painting , hot galvanizing, sand blasting, FBE, 2PE, 3PE etc Packing in bulk due to big sizes TPI SGS, BV, MOODY, CCIC Details of surface treatment Single-Layer FBE Coating SY/T 0315-2005, CAN/CSA Z245.20-2010, DEP 31.40.30.32-Gen-2011, ISO 21809-2-2007, API RP 5L9-2001 Double-Layer FBE Coating Q/CNPC 38-2002, CAN/CSA Z245.20-2010 2LPE/2LPP Coating SY/T 0413-2002, GB/T 23257-2009, ISO 21809-1-2009 3LPE/3LPP Coating SY/T 0413-2002, GB/T 23257-2009, DIN 30670-1991, CAN/CSA Z245.21-2010, ISO 21809-1-2009, NF A49-711-1992, NF A49-710-1988 Insulation Coating SY/T 0415-1996, CJ/T 114-2000, EN 253-1994 Application SSAW steel pipe is typically used to transfer gas, oil, or water
Hardware stamping parts, automotive parts, electronic and electrical parts, machining, sheet metal parts.
