1. Dimension: 3800*1500*1510(mm)
2. Power: 3.74kw
3. processing length: í-3100
4. Drilling diameter: í-¿¬6mm-¿¬100mm
5. Decorative lines width: í-600mm
6. Stone thickness: í-200mm
7. Auto travel: 0.26-4.38m/min (3-phase 380v)
0.31-5.25m/min (3-phase 220v)
8. Head angel: May be freely rotated
9. Travel distance: The distance may be set as required
10. Curved border grinding: Both inner and external curves may be cut
11. Grinding head rotation speed: 1900/3800 rpm
12. Saw blade diameter: í-350mm.
YK523 HOLE CUTTING MACHINE is one of stone processing machine . it mainly for cutting ellipse or round hole of slab, improve efficiency and quality of processing, especially for mess producing.
Its motor head can circle moving 360ípunder the model guide, speed by VFC, auto lifting, cutting depth adjust available, auto return back after cutting work finish. Motor head has slider, can adjust smaller or bigger size by the same model. It is very easy to operate .
3.Main technical features:
1)The system equipped with PLC control unit includes safety logical module, producing procedure module and fault diagnosis module. Through human machine interface, the long-distance fault diagnosis function can be achieved, thus operators can handle the system smoothly by simple training.
2)Equipped with 4-poster conducting device and mold unit includes cover-mold and base-mold which pressed by each separated hydraulic transmission device and controlled by synchronization unit. Thus, the system so far so durably.
3)Equipped with especially-designed feeding unit including pendulum fork to remove the raw material effectively and evenly.
4)Equipped with hydraulic transmission unit which assembled of high quality elements manufactured by world famous supplier.
5)Using independent hydraulic integrated station, it can avoid the influence of hydraulic system from the vibration of the main engine to guarantee hydraulic system working reliability.its low frequency condition for vibration and high frequency condition for forming so that products can reach satisfied density and uniformity.
6)The system can produce concrete masonry units with a great many specifications by replacing different molds.
4.Options
1)Board stack system: system can stack the board 3-8 tiers for different productions.
2)Secondary feeding system: system can feed colorful raw material to produce many kinds of polychrome pavers and other special products.
3)Molds for other shapes block.
4)can be fully automatic by adding necessary equipments
5)face color device(layered material feeding)for making color paving block.
5.Advantages:
Short cycle time
Advanced technology, integrated vibration, hydraulic system
Good welding techniques, strong structure
High intensity mould vibration, good density and uniformity of brick
Plc intellectual control, make sure integration and accurancy.
equipped with complete logic control, production program, malfunction diagnosis system and remote control function. So it doesnt need a professional person but only need a simple trainning to the operator.
3.Technical features:
1)various models set to block,produce a variety of block wall
2)effective vabrition, material feeding make block high strength and density
3)materials can be waste materials, cost saving
4)short moulding period, easy for operation
5)stripping can be stacking
6)advanced welding technology and imported parts,ensure strength structure.
4.Product advantages:
1)it can produce many kinds of blocks by changing different moulds
2)short forming time,easy operation,labour saving
3)effective vertical table vibration ensure product density .
Features:
It is of various types.
It is suitable for crushing maximum, medium and minimum stones.
The operating principle is easy to be operated.
The structure is simple and it is easy to maintain.
42468 Builders Hardware Construction Material Equipment Suppliers
Short on time? Let Builders Hardware Construction Material Equipment sellers contact you.
Chemistry gypsum powder production line:ªG building gypsum powder.
Chemistry gypsum is refers to the industrial production process, forms industrial products, such as desulphurization gypsum, phosphorus gypsum, fluorine gypsum, lemon gypsum and so on.Raw material characteristic:the surface water is more than 20%, the ingredient relative is unstable.
Building gypsum powder production technology introduction:
Uses raw material pre-drying , bolling stove calcine that two step calcine technique of production, use car loader to transport raw material from dump site to material basket, by beater, the belt conveyer to transport uniformly to the dryer(the heat source of this place is that burn coal the hot-blast stove), though collection powder equipment vertical transmisslon equipment brought into boilling stove calcined(that furnace heat is the htf stove), after calcination shipped goals mushroom grinding machine modified and cooling, and from promotion transportation to the warehouse, packaging warehouse.
When heating and calcining the dihydrate gypsum, the dihydrate gypsum will be decomposed, we can produce the semi-hydrated gypsum (CaSO4?/2H2O) , that is building gypsum, also called plaster of paris. Because of the different temperature and pressure when decompose the gypsum, we can get different product, a-type gypsum and b-type gypsum. a-type gypsum is high-strength gypsum,b-type gypsum is building gypsum. They are the same technology using mechanisation producing building gypsum. The process can be divided into three system, crashing system, calcining system and milling system.
The machine applies to 90 v groove cutting for aluminum and plastic profiled bar which is clamped and cut by pneumatic drive ; it has characteristics of simple operation , high safety, exact cutting dimension, and convenient maintenance.
Technical Parameter:
Air pressure:0.4-0.6MPa
Air consumption:80L/min
Input voltage:380V 50HZ
Total power:0.75KWx2
cutting depth:0-65mm
Welding length:300-1700mm.
The machine applies to processing glass strip ; it adopts saw bits that can cut off and chamfer angle for glass strip at one time .the machine is horizontal fixed. It has characteristics of simple operation ,stable running ,convenient clamping for ptofiled bar; its work efficiency is high.
Technical Parameter:
Air pressure:0.4-0.6MPa
Air cosumption:80L/min
Input voltage:380V 50HZ
Total power:0.75KWx2
Speed:2800r/min
Welding length:320-1800mm.
It is mainly used for exterior wall construction, decoration, cleaning and maintenance of high-rise buildings.
The safety lock automatically fasten the steel wire rope within 100mm, when the load cable is stuck or broken, out of hoist or the platform is inclined.
The platform can be made of steel or aluminum alloy according to your desire.
The specifications are as follows,
Model: Zlp 630 Zlp 800
Rated loading capacity: 630kg 800kg
Lifting speed: 9.6m/min 8m/min
Length of the platform: 1m-6m 1m-7.5m(according to the customers' desire)
Standard length: 2m*3 set 2.5m*3 set
Weight of the platform: 358kg 450kg
Power of the motor : 1.5kw*2set 2.2kw*2set
Model of the hoist : ltd6.3 Ltd8.0
Tamping rammer
Mt72f (tamping rammer)
Technical specification
Engine: air-cooled, 4-cycle, single cylinder
Engine type: petrol, robin eh12-2d
Power (hp): 3.5
Weight (kg): 72
Impact force (max.) kn: 13.7
Jumping stroke (max.) : 85mm
Size of foot mm:340*285
Dimensions mm: 720*410*1043
Fuel tank l: 2.5
Impact number (number per minutes): 640-680
Features:
Tamping rammer
1. 4-cycle petrol engine and diesel
2. Double cleaner system
3. Heavry-duty shock rubber absorb kickbacks
4. High-density polyethylene fuel tank eliminate corrosion
5. Rack and pinion throttle lever
6. Laminated wood (plywood) and steel well absorb shock and stress
Walk-behind power trowel
Wg30 (power trowel)
Technical specification
Engine: air-cooled, 4-cycle, single cylinder
Engine type: petrol, honda gx160
Power (hp): 5.5
Weight (kg): 64
Rotor diameter (cm): 76
Guard diameter (cm): 79
Number of blades: 4
Finish blades (cm): 15*27
Combination blades (cm): 15*27
Features:
Edging power trowel
Low maintenance and long-life design
An economical solution for troweling small surfaces, edges and corners.
1. Independent rotating flywheel, allowing operation in tight corners
2. Foldable handle easy for transportation and storage
3. Lifting hook is available as standard
4. Over-built gearbox assure a superior finish
5. Heavy-weight design to assure a superior finish
6. Height adjustable handle, assures operator comfort and easy control
7. Centrifugal safety switch, shuts the engine down in the event of the operator loosing control of the people
8. Screw control ensures precise blade adjustment
9. Throttle control is available as optional
Single drum vibratory rollers
Wy
Technical specification
Technical specification
Engine: air-cooled, 4-cycle, single cylinder
Engine type: honda gx120 / kama kg160
Power (hp): 5.5
Weight (kg): 168
Frequency (vpm): 4620
Centrifugal force (kn):10
Water tank (l): 16
Roller size (cm): 56
Features:
Mainly used to ram the asphalt surface and gravel, sandy soil
1. Small operating radius, can work within small area
2. Self-locking reverting mechanism, make sure reverting easily and operating conveniently
3. For handrail, adopts plane gear adjusting mechanism, not only suitable for people with different heights to operate, but also can be transported easily
4. Top grade practical long-distance throttle controlled lever
Features:
Low maintenance design
Best choice for compaction of sand, gravel, grit, granular materials.
1. Vibration isolated reversible handle for ease of operation and reduced operator fatigue
2. Conveniently placed handles
3. Open design reduces dirt building
4. Centrally mounted fully enclosed exciter for an even spread of compactive force over the whole base plate
5. Heavy-duty shock mounts reduce vibration to the upper engine
6. Protective frame is available as optional
7. Water tank is available as optional
Optional
Rubber mat
93kgs
42468 Builders Hardware Construction Material Equipment Suppliers
Short on time? Let Builders Hardware Construction Material Equipment sellers contact you.
