MikaZone Hydroxypropyl Methyl Cellulose (HPMC) is a non-ionic cellulose ether made from natural polymer material cellulose through a series of etherification. It is a white powder that swells in cold water into a clear or slightly turbid colloidal solution. It has the characteristics of thickening, dispersion, emulsification, film formation, suspension, adsorption, surface activity, moisture retention and protective colloid.
This type of product has a higher water reduction rate, which is higher than JS-103, and has ultra-high slump protection performance. It is especially suitable for the environment with poor materials or summer with high temperature. Compared with the polycarboxylic acid mother liquor on the market, it can reduce the consumption of slump protection mother liquor by 20%-40%.It is mainly used in high-strength concrete with high requirements, and its products are mainly used in high-speed railway and high-speed railway Road, hydropower and other large engineering projects pumped concrete, super fluid self-compacting, high strength and high performance concrete and commercial concrete. Product Feature 1.It has a higher water reduction rate and a higher slump protection performance, especially for the concrete with great loss in time. 2.High water reduction rate and low dispersion velocity. 3.The comprehensive cost performance is high, especially suitable for summer, high temperature environment.
3D Board provides a creative and cost effective solution for bringing decor to life in the home or commercial environment. 3D Board surface is smooth, texture is lifelike, bulk density is even, color nature..It easy to maintain and clean. 3D Board board has a good performance on high hardness,strong adhesiveness ,abrasion resistance ,chemical resistance,scratch resistance,water proof and heat resistance. 3D Board board is used in wide range of construction,interior office decoration,furniture area like wardrobe,kitchen cabinet,slatwall,corridor wall,bathroom wall,etc.
SiC castable with high purity SiC raw material as main material, pure calcium aluminate cement and micro powder as binder, has high high temperature strength and wear resistance, can be cast, spraying and coating construction.It can be used in waste incineration furnace, blast furnace body, cyclone furnace, efferent furnace and boiler, etc.
It has the common advantages of corundum castable and mullite castable.High temperature strength, good thermal shock resistance and structure spalling resistance;Good thermal shock resistance, high load softening temperature, low high temperature creep rate, good chemical corrosion resistance, can be used for large power station boiler anti-wear lining and other high temperature kiln lining.
Lightweight castable has light volume, high compressive strength, acid and acid gas corrosion resistance.Low heat insulation, heat preservation, water absorption rate features, simple construction, is the most ideal construction of alkali resistant parts under high temperature.Good workability, adhesive power is strong, the initial setting time and construction operation time is long, fast growth strength, permeability resistance is strong, do not need to acidification treatment, easy to ensure the masonry mortar joint dense full, can significantly increase the tightness of chimney lining wall, integrity and lined with corrosion resistant ability, high chimney, and the high temperature flue duct lining ideal cementing materials, also can be used in petroleum, chemical industry, non-ferrous metallurgical industry such as acid pool, slot acid engineering, etc.
Heavy castable is high temperature resistance, high strength, according to the use of the environment to mix, with wear resistance, flame erosion and other functions, generally direct contact with the flame.
Low heat insulation, heat preservation, water absorption rate features, simple construction, is the most ideal construction of alkali resistant parts under high temperature.Good workability, adhesive power is strong, the initial setting time and construction operation time is long, fast growth strength, permeability resistance is strong, do not need to acidification treatment, easy to ensure the masonry mortar joint dense full, can significantly increase the tightness of chimney lining wall, integrity and lined with corrosion resistant ability, high chimney, and the high temperature flue duct lining ideal cementing materials, also can be used in petroleum, chemical industry, non-ferrous metallurgical industry such as acid pool, slot acid engineering, etc.
According to the different wear medium and erosion speed of the flue wear pouring material, generally in the duct, elbow and cyclone separator at the construction thickness of 20mm, local wear is serious parts, such as the separator cutting cone bucket, cutting chute, etc., can increase the construction thickness to 30mm or 40mm.If the construction thickness is more than 20mm, it is necessary to weld the isolation rebar on the equipment motherboard first.When the construction thickness is 30mm, 6mm steel bar shall be adopted.When the construction thickness is 40mm, 8mm-10mm steel reinforcement shall be adopted;Then weld the steel mesh on the rebar, stirring and daubing procedures are the same as when the construction thickness is 20mm.
12Mm Thickness Acoustic Concealed Mineral Board,Square Fissured Ceiling Board Tile Transportation and storage 1. Steel corner is necessary at the touch point of the rope and the board box, so that can avoid damage of the box. 2. Support the mineral wool sound absorption board with wooden structure that is higher than 15cm when the board is put on the ground. The distance to the wall should be more than 40cm. 3. Please pay attention to the warnings on the box in transportation and storage. Cycle and reutilization Mineral fiber, the main raw material, contains recuperated slag, the organic fiber is recuperated newspaper. The recuperated materials do not contain any asbestos, formaldehyde and other venenous and noxious substance. The scrape during manufacturing and old ceiling board can reused(the reusing rate can reach 79%) which decreased the builders rubbish and avoids the environment pollution. Green production process The production process accords with the standard of environmental protection. The main released substance during production process is steam. Green application The main function of mineral wool board is sound absorption and noise reduction which can help to ease oneself and abate the noise. The mineral wool board can absorb and disassemble poisonous substance, increase the density of negative oxyanion effectively and help us to build a foresting cities. Absorbing the excess moisture and improve the living environment. The strong reflected ability can improve the indoor sunlight, protect the vision and ease oneself. Energy saving and consume decreasing The high reflectance of mineral wool board can decrease the electric power cost indirectly. The rate can reach 18%-25%. The performance of heat preservation and heat insulation can decrease the costs of refrigeration and heating greatly and the rate can reach 30%-45%. Patterns: Pin hole fine fissured, dune surface, sand textured, customized Material: Wet formed mineral fiber Surface: Vinyl latex Color: White, black Size: 595*595mm, 603*603mm, 603*1213mm, 600*1200mm, customized Thickness: 6-20mm Edge: Square, Tegular, Micro, Concealed NRC: 0.4-0.6 Fire Resistance: Class 0/ Class 1-BS 476 Light Reflentance: 0.80-0.95 Humidity Resistance(RH): 80%-95% Environmental protection: Non-asbestos, NO formaldehyde
Glass wool was used for building materials , and steel structure insulation. Soundproof and fireproof used for wall and roof of house. Heat preservation for steel structure building, heat Insulation for wall and roof of house to save energy.
Excellent fiber glass wool building material is a silk-like material made by fiberization in the TEL process and spraying ofthermosetting resin. By further deep processing of thermal setting, this material can be made into series of multi-purpose fuerda products. It features numerous advantages : it is non-combustible, nontoxic, and resistant to corrosion; it has low moisture rate and good hydrophobicity.
1,High compressive strength, tensile strength and good durability ensures the reliability and long-term stability of the product in the application. 2,Low thermal conductivity can effectively reduce the heat loss of the building to achieve energy saving and emission reduction. 3. Rock wool blanket will not release heat and poisonous smoke because of its incombustibility and can effectively partition the spread of flam when fire occurs. 4,It has good performance of non-hygroscopicity, ageing resistance and long-term stability. 5,It is light weight and easy to be cut and processed It is widely used for heat insulation and sound absorption in industrial workshops, Prefab houses, Portable cabins, warehouses, public facilities, exhibition centers, shopping malls, and a variety of indoor playgrounds, sports stadiums and etc.
Place Of Origin: Zhejiang, China (Mainland) Form: Cream Certification: Confirmed Ingredient: Mineral Feature: Sunscreen, Waterproof Color: 2 Colors Per Palette Occasion: Common Makeup Use For: Cover Skin Flaws,Dark Eyecircles,Pouch Etc. Use: Face 1. High quality ingredients and strict QC. 2. Professional team of R&D and 5-star service. 3. Large production capacity and fast delivery. 4. Factory price: Offer EXW price, FOB price and CIF price, or according to client's requirements.
Building steel formwork- laser cutting and sheet metal china, lianda industrial science and technology (dalian) co., ltd. Was established 1998, is a precision sheet metal processing and laser cutting, punching, cutting, folding, pressing, welding and other train professional design and production enterprises. The company has the most advanced laser cutting machine and sheet metal processing equipment. One of the important equipment bystronic laser cutting machine, japan amada cnc shears, japan amada cnc punching, cnc bending machine, bystronic bending machines. The product quality and the technology are in the international advanced level. Company to undertake the business of precision sheet metal processing: widely applicable to public utilities, communications, electricity, power, air conditioning, industrial, power amplifier, transportation, advertising and other industries. Main business: laser cutting service china, sheet metal fabrication china, sheet metal parts china, sheet metal parts Oem china, odm/oem professional stainless steel 316/303/304 sheet metal stamping parts with cnc laser cutting bending etc. -
Glass Fiber Yarn Description: 1. It is made of fiberglass roving yarns which are bulked and blown through special instrument with high pressure air. 2. It has high strength as continuous fiber and fluffiness as staple fiber, low thermal conductivity coefficient, high dust-accommodation and filterability. 3. Glass fiber texturized yarn with metallic (copper wire, inconel wire or stainless wire) are also available. Glass Fiber Yarn Applications: 1. Fiberglass yarn has advantage as insulating ability. 2. It is good and fire resistant against heat material, used as heat insulation, electrical insulation materials and also made into other products. 3. It with metallic can extensively apply to friction materials. 4. It is the excellent substitute for asbe stos.
Graphite Packing Inconel Wire Graphite Raw Material Description: 1. Graphite Packing Inconel Wire Graphite Raw Material is made from expanded graphite yarn braided into through all kinds of technology of braiding . 2. They are almost suitable to all media, such as hot water, steam, acids, alkalis, organic solvents,hydrocarbons, low temperature liquids, etc. 3. The sealing capability is more better and safety,it is the most effctive composite parts forsolving problems, Pure Flexible Graphite Packing is very popular. Graphite Packing Inconel Wire Graphite Raw Material Application Areas: Braided Graphite packing can be used in valve and some rotary application, high temperature valve and soot blowers Graphite Packing Inconel Wire Graphite Raw Material Application Media: Braided Graphite packing is suitable for all application, seals hot water, high temperature and pressure steam, heat transfer fluid , hydrogen gas, ammonia, Solvents. Hydrocarbons, Cryogenic liquids, etc. Graphite Packing Inconel Wire Graphite Raw Material Not Suitable For: Fewer strong oxidizers Other Graphite Packing Inconel Wire Graphite Raw Material : (SP-5000FG) Pure Flexible Graphite Braided Packing With Fiberglass Threads Reinforced (SP-5000INC) Pure Flexible Graphite Braided Packing With Inconel Wire Reinforced (SP-5000FG) Pure Flexible Graphite Braided Packing With Carbon Threads Reinforced (SP-5200) Pure Flexible Graphite Packing PTFE Impregnated (SP-5600) Pure Flexible Graphite Packing With High Carbon Fiber Corner Packing (SP-5800MESH) Pure Flexible Graphite Packing With Inconel Jacketed Mesh Vocer On Every Twisted Yarn
Stuffing Rope Acrylic PTFE Packing Valve Stem Seal Pump Gland Packing Description: 1. Stuffing Rope Acrylic PTFE Packing Valve Stem Seal Pump Gland Packing was made from Synthetic Composite yarn, and impregnated with PTFE emulsion (No lubricants or oils). 2. To provide extra chemical resitance. Stuffing Rope Acrylic PTFE Packing Valve Stem Seal Pump Gland Packing Application: 1.Stuffing Rope Acrylic PTFE Packing Valve Stem Seal Pump Gland Packing is widely used in Application of Alkalies, mild acids, solvents, steam and oils. 2.It is recommended for rotary shafts, reciprocating applications, and valves.
Packing Seal PTFE Filament With PTFE Oil Gland Packing Description: STYLE 6800W is Braided of pure PTFE filament yarns, impregnated with ptfe dispersion, firm high-density braided packing. Packing Seal PTFE Filament With PTFE Oil Gland Packing Application Areas: STYLE 6800W can be used in a wide range of process chemicals and concentrated acids, valve stems, rotary shafts, reciprocation equipment, and other processing equipment high peripheral speed, rod, pistons. Packing Seal PTFE Filament With PTFE Oil Gland Packing Application Media: 1. STYLE 6800W is suitable for water, steam, concentrated acids and caustics, solvents, oils, fatty acids, detergents, aggressive gases , resistant to gamma and neutron rays, hydrogen, heat transfer oils, and most other chemicals and solvents. 2. STYLE 6800W is not suitable for molten alkali metals and fluorine compounds at high temperatures and pressures.
