Kasner siding is a new kind of the lightweight and high quality building decorative materials. They become worldwide popular so quickly due to the characteristic of its time-saving, low cost, beauty and weatherability. It is not only for external wall decoration of various constructions such as residence complex, superior villas, scenic spots Architectures and office buildings, but also suitable for refurbishment of old buildings.
1.Camp k modular houses with middle-size are the most economical ones for accommodation, office, temporary storage. The layout is flexible with span from 5m-18mand length of 1.82m(1k=1.82m) as standard expansion module. 2.The stable frame-share wall structure of house is worked by unique structure system, superior wind resistance, cold-formed thin-walled steel structure, cross layout, flexible cable, lateral wall panel arrangement. 3.The house is one of the fasted installation temporary houses. Four people can install 80m2 each day. A 40ft container can ship about 200 square meters(construction area). This transport volume is economical. 4.This house is one of the best dismantling performance temporary house. It can disassemble 10 times. Building technology: one layer, two layers and three layers . By plastic film
1.T modular house is most economical temporary house for living and working. General standard is width 5m, length 1.15m, or 0.9m which is flexible in design. 2.It is installed quickly, usually 4 workers can assemble 130 square meter one day. While 330 sqm can be loaded in the 40ft container. It can endure dismounting for many times up to 10. The roof is designed with water insulation structure and without tack hole. By plastic film
Stone resellers and construction material .
Description Polycarboxylate Superplasticizer concrete admixture (Powder) is a high performance, 100% poly-carboxylate based polymer, also named PCE. Polycarboxylate Superplasticizer concrete admixture (Powder) is specifically developed as an effective dispersant, fluidifier and high range water reducing agent for concrete and other mineral materials, which is air entraining. It complies with ASTM C 494, Type F specifications. Application As a new generation of environmental friendly concrete admixtures, Polycarboxylate Superplasticizer concrete admixture (Powder) can be applied in hydraulic, electricity, port, bridge, railway, tunnels and highway projects. In the production of self-compact precast concrete and conventional concrete, Polycarboxylate Superplasticizer concrete admixture (Powder) leads to low water/cement ratios, but maintains a normal level of workability. Features and Benefits Polycarboxylate Superplasticizer concrete admixture (Powder) has the same technical specifications with PC-L while remarkably reducing the cost of package and transportation. 2. Polycarboxylate Superplasticizer concrete admixture (Powder) is much easier to be handled in storage and transportation compared with PC-L. 3. Excellent compatibility with various types of cements. 4. High Water Reducing Rate: Low dosage, and low slump loss. Low chloride and alkali content, no corrosion to steel-bar. 6. High Stability: Neither precipitation nor layers at low temperature. 7. Environmental Friendly: Free from formaldehyde and nontoxic. Uses and Dosages 1. When Polycarboxylate Superplasticizer concrete admixture (Powder) is applied in the form of powder, normal dosage ranges from 0.15% to 0.6% of the weight of cementitious material in 1m3 of concrete. When applied in the form of liquid by being mixed with and dissolved into water, Polycarboxylate Superplasticizer concrete admixture (Powder) can be changed into liquid of which density varies from 10% to 40%. In order to optimize the dosage, experiments are required before the adoption of it or changing of the cement type. 2. Recommended dosage: 0.2% of the weight of cementitious material in 1m3 of concrete. 3. Polycarboxylate Superplasticizer concrete admixture (Powder) can be added into cement paste together with water or after mixing, while the latter approach is preferred. 4. The quantity of water must be strictly controlled when Polycarboxylate Superplasticizer concrete admixture (Powder) is applied, since slump loss of concrete is closely related to it. 5. Polycarboxylate Superplasticizer concrete admixture (Powder) is alkalescent, nontoxic, non-corrosive and environmental friendly. If it gets onto skin or in the eyes, please wash it off with clean water at once. If there is skin allergy, please see a doctor. 6. Do not mix it with naphthalene-based admixtures. If other admixtures, such as set retarder or corrosion-inhibiting admixture, are required simultaneously for some special projects, compatibility tests should be conducted beforehand. 7. When applying Polycarboxylate Superplasticizer concrete admixture (Powder) in steam curing concrete or other special concrete, abundant experiments are highly recommended to make sure it satisfies the expected requirement. 8. When Polycarboxylate Superplasticizer concrete admixture (Powder) is used to make concrete at or below C45, the total cost may be reduced by increasing the quantity of minerals. Package, Storage & Handling 1. Polycarboxylate Superplasticizer concrete admixture (Powder) for powder: Woven fabric bag with plastic liner. Net weight: 20kg +/- 0.13 kg. 2. Polycarboxylate Superplasticizer concrete admixture (Powder) needs to be stored in well-ventilated and dry place. 3. Keep Polycarboxylate Superplasticizer concrete admixture (Powder) from sunlight and below freezing point. Its storage stability can retain 12months in original package, but please use it up in 60days if it's been opened and repacked. 20kg/bag, 12 tons loaded in a 20ft.
Description Polycarboxylate Superplasticizer concrete admixture (40%) is a high performance, 100% poly-carboxylate based polymer, also named PCE. Polycarboxylate Superplasticizer concrete admixture (40%) is specifically developed as an effective dispersant, fluidifier and high range water reducing agent for concrete and other mineral materials, which is air entraining. It complies with ASTM C 494, Type F specifications. Application (1)As a new generation of environmental friendly concrete admixtures, Polycarboxylate Superplasticizer concrete admixture (40%) can be applied in hydraulic, electricity, port, bridge, railway, tunnels and highway. (2) In the production of self-compact precast concrete and conventional concrete, Polycarboxylate Superplasticizer concrete admixture (40%) leads to low water/cement ratios, but maintains a normal level of workability. Features and Benefits 1. Excellent compatibility with various types of cements. 2. High Water Reducing Rate: Low dosage, and low slump loss. 3Low chloride and alkali content, no corrosion to steel-bar. 4. High Stability: Neither precipitation nor layers at low temperature. 5. Environmental Friendly: Free from formaldehyde and nontoxic. Uses and Dosages 1.When Polycarboxylate Superplasticizer concrete admixture (40%) is applied, the dosage normally ranges from 0.3% to 1.2% of the weight of cementitious material in 1m3 of concrete. In order to optimize the dosage, experiments are required before the adoption of it or changing of the cement type. 2.Recommended dosage: 0.4% of the weight of cementitious material in 1m3 of concrete.When applied in ready-mixed station, it should be diluted into solution with the concentration of 10% and the recommended dosage. 3.Polycarboxylate Superplasticizer concrete admixture (40%) can be added into cement paste together with water or after mixing, while the latter approach is preferred. 4.Polycarboxylate Superplasticizer concrete admixture (40%) is alkalescent, nontoxic, non-corrosive and environmental friendly. If it gets onto skin or in the eyes, please wash it off with clean water at once. If there is skin allergy, please see a doctor. 5.Do not mix it with naphthalene-based admixtures. If other admixtures, such as set retarder or corrosion-inhibiting admixture, are required simultaneously for some special projects, compatibility tests should be conducted beforehand. 6.The quantity of water must be strictly controlled when Polycarboxylate Superplasticizer concrete admixture (40%) is applied, since slump loss of concrete is closely related to it. 7.When applying Polycarboxylate Superplasticizer concrete admixture (40%) in steam curing concrete or other special concrete, abundant experiments are highly recommended to make sure it satisfies the expected requirement. 8.When Polycarboxylate Superplasticizer concrete admixture (40%) is used to make concrete at or below C45, the total cost may be reduced by increasing the quantity of minerals. Package, Storage & Handling 1.Polycarboxylate Superplasticizer concrete admixture (40%) for liquid: It is packed in 1100kg (1000Liter) per IBC Tank. 2. Store it in covered containers and keep it from rain, sundry, and evaporation. 3. Keep Polycarboxylate Superplasticizer concrete admixture (40%) from sunlight and below freezing point. Its storage stability can retain 12months in original package, but please use it up in 60days if it been opened and repacked. 1.16 tons/IBC tank, 20.88 tons loaded in a 20ft.
Description Naphthalene Sulfonate (FDN) concrete admixture is a high range water reducer, high concentrate naphthalene-based superplasticizer, also named Naphthalene Sulfonate Formaldehyde Condensate (NSF), SNF, PNS, etc.. Naphthalene Sulfonate (FDN) concrete admixture is made of naphthalene, sulfonic acid, formalin and alkali through sulphuration, hydrolyzation, condensation and neutralization reaction. Naphthalene Sulfonate (FDN) concrete admixture contains no chloride. It conforms to the requirements of chemical admixture specifications for concrete: ASTM C 494, Type F; ASTM C 1017. Application 1.Naphthalene Sulfonate (FDN) concrete admixture is suitable to make autotrophic concrete, steam curing concrete, steel concrete and prestress concrete, all of which are made mainly of portland cement. When concrete added this superplasticizer needs to be steam cured, it requires considerable structural strength. The curing requirements should be pre-tested. 2.Naphthalene Sulfonate (FDN) concrete admixture is applicable in areas with the daily lowest temperature of and for making concrete which requires high fluidity, high strength or steam curing. 3.Naphthalene Sulfonate (FDN) concrete admixture can be used to make C80 concrete with slump loss between 50mm and 70mm, or C60 concrete with that between 180mm and 220mm. 4. Naphthalene Sulfonate (FDN) concrete admixture could be used as a raw material together with other components to make other kinds of admixtures, such as accelerator, retarder, anti-freezing agent and pumping aid to satisfy requirements from different construction projects, techniques, materials and environmental temperatures. 5. Naphthalene Sulfonate (FDN) concrete admixture will also fluidize concrete, making it ideal for tremie concreting or other applications where high slumps are desired. 6. Naphthalene Sulfonate (FDN) concrete admixture is compatible with Portland Cement, Portland Slag Cement, Fly-ash Cement, Portland Pozzolanic Cement, etc. Features and Benefits 1. High water-reducing rate: Naphthalene Sulfonate (FDN) concrete admixture has a water reducing rate of more than 25%. It effectively increases concrete fluidity and reduces water bleeding and cement segregation. Therefore, it improves concrete placement and makes concrete easy to use and compacting. 2. Strengthening ability: Given the same amount of cement and slump requirement, this product can increase the concrete strength by 50-110%, 40-90%, 40-70% and 20-40% on day 1, 3, 7, and 28 respectively. 3. Good compatibility: It can be used with various types of cement. It is compatible with other admixtures. It may be used with expanding agents, air entraining agents as well as fly ash for supplementary and catalytic purpose. 4. Appropriate setting time: It doesn't influence the initial and final setting time. The difference in setting time generally is less than 1 hour. 5. Low sodium sulfate content: The aqueous solution has no crystallization in winter, which can avoid pipeline congestions. 6. Safety: It's non-toxic, non-irritating and non-emissive. It has no corrosion to steel bars. It's also hard to burn and explode. 7. High durability: It can modify the pore structure of concrete and improve impermeability, anti-freezing and thawing ability and carbonization. 8. Easy to use: It can be added directly or after being dissolved in water. It can be used for different working conditions and concrete mixers. Uses and Dosages 1. Naphthalene Sulfonate (FDN) concrete admixture can be added directly or added in after being dissolved. It can be added during mixing and after-mixing. 2. The afterward approach can achieve better result. Naphthalene Sulfonate (FDN) concrete admixture is addition rate ranges from 0.4% to 1.0% of the weight of cementitious material in 1m3 of concrete, while the suggested rate is 0.5%. 3. If Naphthalene Sulfonate (FDN) concrete admixture is used in powder form, add it directly into cement, but not onto wet sand and gravels. If solution is used, please fully stir and dissolve it completely. Package, Storage & Handling 1. Naphthalene Sulfonate (FDN) concrete admixture for powder: Woven fabric bag with plastic liner. Net weight: 25kg +/- 0.13 kg. 2. When being handled or stored, special care should be taken to broken package, humidity and moisture to avoid consolidating. If it's consolidated, please dry, shatter, then sift it through 0.63mm apertures or make solution before using. 3. Naphthalene Sulfonate (FDN) concrete admixture should be stored in a dedicated warehouse that is well-ventilated and dry. It's shelter life is 12months. 4. Since Naphthalene Sulfonate (FDN) concrete admixture is packed in woven plastic bags, though the product is nonflammable, cautions should be taken to avoid fire. 25kg/bag, 16 tons loaded in a 20ft.
Description Polycarboxylate Superplasticizer concrete admixture (50%) is a high performance, 100% poly-carboxylate based polymer, also named PCE. Polycarboxylate Superplasticizer concrete admixture (50%) is specifically developed as an effective dispersant, fluidifier and high range water reducing agent for concrete and other mineral materials, which is air entraining. It complies with ASTM C 494, Type F specifications. Application (1) As a new generation of environmental friendly concrete admixtures, Polycarboxylate Superplasticizer concrete admixture (50%) can be applied in hydraulic, electricity, port, bridge, railway, tunnels and highway. (2) In the production of self-compact precast concrete and conventional concrete, Polycarboxylate Superplasticizer concrete admixture (50%) leads to low water/cement ratios, but maintains a normal level of workability. Features and Benefits 1. Excellent compatibility with various types of cements. 2. High Water Reducing Rate: Low dosage, and low slump loss. 3Low chloride and alkali content, no corrosion to steel-bar. 4. High Stability: Neither precipitation nor layers at low temperature. 5. Environmental Friendly: Free from formaldehyde and nontoxic. Uses and Dosages 1. When Polycarboxylate Superplasticizer concrete admixture (50%) is applied, the dosage normally ranges from 0.3% to 1.2% of the weight of cementitious material in 1m3 of concrete. In order to optimize the dosage, experiments are required before the adoption of it or changing of the cement type. 2. Recommended dosage: 0.4% of the weight of cementitious material in 1m3 of concrete. When applied in ready-mixed station, it should be diluted into solution with the concentration of 10% and the recommended dosage thereafter is 2% of the weight of cementitious materials. For example, 100kg of Polycarboxylate Superplasticizer concrete admixture (50%) (50% concentration) can be mixed with 400kg of water to make solution of 10% concentration. 3. Polycarboxylate Superplasticizer concrete admixture (50%) can be added into cement paste together with water or after mixing, while the latter approach is preferred. 4. Polycarboxylate Superplasticizer concrete admixture (50%) is alkalescent, nontoxic, non-corrosive and environmental friendly. If it gets onto skin or in the eyes, please wash it off with clean water at once. If there is skin allergy, please see a doctor. 5. Do not mix it with naphthalene-based admixtures. If other admixtures, such as set retarder or corrosion-inhibiting admixture, are required simultaneously for some special projects, compatibility tests should be conducted beforehand. 6. The quantity of water must be strictly controlled when Polycarboxylate Superplasticizer concrete admixture (50%) is applied, since slump loss of concrete is closely related to it. 7. When applying Polycarboxylate Superplasticizer concrete admixture (50%) in steam curing concrete or other special concrete, abundant experiments are highly recommended to make sure it satisfies the expected requirement. 8. When Polycarboxylate Superplasticizer concrete admixture (50%) is used to make concrete at or below C45, the total cost may be reduced by increasing the quantity of minerals. Package, Storage & Handling 1. Polycarboxylate Superplasticizer concrete admixture (50%) for liquid: It is packed in 12000kg (1000Liter) per IBC Tank. 2. Store Polycarboxylate Superplasticizer concrete admixture (50%) in covered containers and keep it from rain, sundry, and evaporation. 3. Keep Polycarboxylate Superplasticizer concrete admixture (50%) from sunlight and below freezing point. Its storage stability can retain 12months in original package, but please use it up in 60days if it's been opened and repacked. 1.16 tons/IBC tank, 20.88 tons loaded in a 20ft.
Description Naphthalene Sulfonate (UNF-5) concrete admixture, a high range water reducer with no air entraining, is commonly referred to as a superplasticizer, also named Naphthalene Sulfonate Formaldehyde Condensate (NSF), SNF, PNS, etc.. Naphthalene Sulfonate (UNF-5) concrete admixture is made of naphthalene, sulfonic acid, formaldehyde and alkali through sulphuration, hydrolyzation, condensation and neutralization reaction. Naphthalene Sulfonate (UNF-5) concrete admixture contains no chloride. It complies with chemical admixture specifications for concrete: ASTM C 494, Type F; ASTM C 1017. Application 1.Naphthalene Sulfonate (UNF-5) concrete admixture is suitable to make autotrophic concrete, steam curing concrete, steel concrete and prestress concrete, all of which are made mainly of portland cement. When concrete added this superplasticizer needs to be steam cured, it requires considerable structural strength. The curing requirements should be pre-tested. 2.Naphthalene Sulfonate (UNF-5) concrete admixture is applicable in areas with the daily lowest temperature of and for making concrete which requires high fluidity, high strength or steam curing. 3.Naphthalene Sulfonate (UNF-5) concrete admixture can be used to make C80 concrete with slump loss between 50mm and 70mm, or C60 concrete with that between 180mm and 220mm. 4.Naphthalene Sulfonate (UNF-5) concrete admixture could be used as a raw material together with other components to make other kinds of admixtures, such as accelerator, retarder, anti-freezing agent and pumping aid to satisfy requirements from different construction projects, techniques, materials and environmental temperatures. 5. Naphthalene Sulfonate (UNF-5) concrete admixture will also fluidize concrete, making it ideal for tremie concreting or other applications where high slumps are desired. 6. Naphthalene Sulfonate (UNF-5) concrete admixture is compatible with Portland Cement, Portland Slag Cement, Fly-ash Cement, Portland Pozzolanic Cement, etc. Features and Benefits 1. High water reducing rate: It has remarkable dispersion and water reducing effect. Its water reducing rate is over 20%. 2. High slump flowability and strength: It enhances the miscibility, fluidity and smoothness of concrete at a regular water/cement ratio and improves the bond stress between concrete and steel bars. 3. Saving cement: It may save cement by 12-25% without sacrificing slump retention and strength. 4. Early Strength and Strengthening Ability: It improves the compressive strength of concrete at same cement quantity and slump loss. 5. Great Compatibility: Naphthalene Sulfonate (UNF-5) concrete admixture can be added to a variety of concrete and improves the physical and mechanical functions of it. By reducing the heat of concrete hydration, it significantly enhances the impermeability of concrete. 6. Improved Compactness: Naphthalene Sulfonate (UNF-5) concrete admixture develops a better pore structure and makes the concrete more compact. It produces high durable concrete of which the anti-infiltrating index is beyond P18. Uses and Dosages 1. Prepare solutions as required. 2. Naphthalene Sulfonate (UNF-5) concrete admixture can be added directly or added in after being dissolved into water. It can be added during mixing and after mixing. The afterward approach can achieve better result. 3. The agent can be combined with other externally applied agents if compatibility test is satisfied. 4. When Naphthalene Sulfonate (UNF-5) concrete admixture is applied in the form of powder, normal dosage ranges from 0.5% to 1.0% of the weight of cementitious material in 1m3 of concrete, while the suggested rate is 0.75% considering technical and economic factors. Package, Storage & Handling 1. Naphthalene Sulfonate (UNF-5) concrete admixture for powder: Woven fabric bag with plastic liner. Net weight: 25kg +/- 0.13 kg. 2. When being handled or stored, special care should be taken to broken package, humidity and moisture to avoid consolidating. If it consolidated, please dry, shatter, then sift it through 0.63mm apertures or make solution before using. 3. Naphthalene Sulfonate (UNF-5) concrete admixture should be stored in a dedicated warehouse that is well-ventilated and dry. It remains effective in one year. 4. Since Naphthalene Sulfonate (UNF-5) concrete admixture is packed in woven plastic bags, though the product is nonflammable, cautions should be taken to avoid fire. 25kg/bag, 15 tons loaded in a 20ft container.
Porcelain tile, ceramic tile, building materials.
Tile grout , adhesive, waterproof.
Pig, sheep breeding equipments, poultry breeding equipments, plastic products, garage floor tiles.Trade, export
Concrete block machine, block making machine(qt6-15, u8-15, qt9-15), brick making machine, paver making machine, hollow block making machine, cement block machine, kerbstone making machine, brick molding machine, block molding machine.
Ready-Mixed Mortar for Various Construction Purposes Our Ready-Mixed Mortar Factory can supply large quantities of ready-mixed mortars for different construction purposes. They are: Masonry mortar Plastering mortar Special thin layer masonry mortar Special thin layer plastering mortar Flooring mortar Polymer crack-resistant waterproof mortar Thermal insulation mortar Soundproof mortar Door and window joint filling mortar ALC panel bonding mortar Ceramic tile adhesive If you have interest in any of the above ready-mixed mortars, please feel free to contact us with your specific requirements including packing and possible order quantity, etc., and we will provide all the necessary details. Advantages of ready-mixed mortar: Ready mixed mortars offer top quality construction with low cost. Ready-mixed mortars solve the problem that the proportion of mortar prepared by traditional mixing is difficult to control and thus influences the construction quality. The measurement of ready-mixed mortar is very accurate and the quality is reliable. Because mortar with different purposes has different requirements for shrinkage, crack, heat preservation and moisture, etc., and the workability, water retention and setting time of construction requirements are also different, these specific requirements need to be formulated strictly according to scientific formulas, and only the production process of ready-mixed mortar can meet these requirements. Because of the accurate measurement and quality assurance, the engineering quality after using ready-mixed mortar is obviously improved, the construction period is obviously shortened, and the amount of labor, reduced. Ready-mixed mortar is a factory-ready-mixed material, which can be used only by adding water and stirring it evenly at the construction site, with little dust escape and more environmental protection. Excellent construction quality will greatly increase the confidence of contractors and owners. The leakage of waterproof mortar layer traditionally mixed on site is also a prominent problem that puzzles owners, but many special waterproof materials in ready-mixed mortar will fundamentally solve such problems.
Our ready-mixed mortar factory has been trying to develop new products and one of them is the ready-mixed heatproof mortar. Here are the product details. 1. Basic information Specification and color: 20kg/bag; white powder Compliance standard: Q/DGJC 12-2018 "Flat Roofing Mortar for Buildings"(China National Standard) 2. Product features Heat insulation and waterproof, anti-cracking and anti-alkali, fire and flame retardant, green and environmental protection. 3. Scope of application It is applicable to: ---the protection and heat insulation of substrates such as waterproof layer of buildings and cement mortar for flat roofs. ---the protection of house waterproof layer and liquid coil waterproof layer. ---substrates such as cement mortar, cement-based or asphalt-based waterproof coating It is not applicable to: ---substrates such as colored steel tiles, glazed tiles, ceramic tiles, etc. ---sloping roofs. 4. Product Overview Ready-mixed heatproof mortar is a new type of inorganic material pre-mixed and dry-mixed with selected lightweight aggregates, inorganic cementitious materials, additives, ect. It has excellent thermal insulation performance, aging resistance and fireproof performance, and is easy to use. Just add water, stir and start the on-site construction work. The product is one of the components of the roof waterproof system, which is used for thermal insulation protection of flat roof, with good thermal insulation effect and waterproof layer protection effect. It can also be used for the protection and thermal insulation of other substrates such as cement mortar flat roofs.
Our production factory is in Yixing city, which is located in Jiangsu Province, China, recognised worldwide as the "The Pottery Capital of China". It is famous around the world as the home of the original clay teapot. Our company Group is a modern facility engaged in the research, development, production and selling of building and construction materials for the construction industry. This includes terracotta louvres, terracotta panels and high-grade exterior wall split tiles and bricks, and fibre concrete boards, vitrified bricks, customized Terracotta & tiles & bricks, permeable brick. Investment in the 60,000sqm state of the art factory is constant, both in terms of the latest machinery, production methods and the continuous development of our biggest asset, our people. The Our company facility is the key industry and largest employer in Yixing City. Currently, its annual capacity of terracotta panels etc is approximately 2.5 million ã?¡, terracotta louvres is around 1.6 million metres, and split tiles about 1.8 million ã?¡, and other building material 3.3 1.8 million ã?¡. OUR company has inherited and developed the iconic purple sand pottery technology in Yixing, Jiangsu Province. With its deep cultural background, rich artistic expression and modern innovation concepts, Our company meets the demanding requirements of high-end designers for the variety of textures and colours of architectural terracotta for facades. Our company is committed to developing an eco-friendly industry, where quality, innovation, health, environmental protection and safety are at the heart of everything we do. Our company advocates harmony between humans and architecture, between humans and the environment and between humans and nature, where we can lead a new era in the construction industry.
Our production factory is in Yixing city, which is located in Jiangsu Province, China, recognised worldwide as the "The Pottery Capital of China". It is famous around the world as the home of the original clay teapot. Our company Group is a modern facility engaged in the research, development, production and selling of building and construction materials for the construction industry. This includes terracotta louvres, terracotta panels and high-grade exterior wall split tiles and bricks, and fibre concrete boards, vitrified bricks, customized Terracotta & tiles & bricks, permeable brick. Investment in the 60,000sqm state of the art factory is constant, both in terms of the latest machinery, production methods and the continuous development of our biggest asset, our people. The Our company facility is the key industry and largest employer in Yixing City. Currently, its annual capacity of terracotta panels etc is approximately 2.5 million ã?¡, terracotta louvres is around 1.6 million metres, and split tiles about 1.8 million ã?¡, and other building material 3.3 1.8 million ã?¡. OUR company has inherited and developed the iconic purple sand pottery technology in Yixing, Jiangsu Province. With its deep cultural background, rich artistic expression and modern innovation concepts, Our company meets the demanding requirements of high-end designers for the variety of textures and colours of architectural terracotta for facades. Our company is committed to developing an eco-friendly industry, where quality, innovation, health, environmental protection and safety are at the heart of everything we do. Our company advocates harmony between humans and architecture, between humans and the environment and between humans and nature, where we can lead a new era in the construction industry.
The new anti - crusting lining board of our company has the characteristics of simple installation and high reliability. It can replace the formwork, and no demoulding is needed after pouring. Directly put into use, shorten the construction period, improve the construction efficiency. Applicable PARTS: kiln tail smoke chamber, rising flue, cutting cone and cutting pipe and other parts that are difficult to repair with skin and wear, and can also be used for cutting slope and other parts.
Typical Application 1.Cement industry kiln back lining thermal insulation 2.Ceramic industry lining of various kilns for thermal insulation, Kiln door, kiln car and dilatation joint, etc,. 3.Petrochemical and metallurgy industries Heat treatment furnace kiln back lining thermal insulation, mechanic and metallurgy heating furnace, thermal treatment furnace and others industrial furnace and hot face internal lining 4.Glass industry Glass kiln lining and back lining thermal insulation 5.Aluminium industry reduction cell firebricks back linings, high temperature reaction, heating device-wall lining and back linings 6.Back-up insulation to brick & castable 7.high temperature electrical equipment thermal insulation
The calcium silicate board is 100% non -asbestos, fire resistant, insulation, Can be used in furnace, kiln, oven's insulation project in many industry areas. common size: 600*300, 1000*500, working temperature 650C and 1050C, thickness: 25-140mm.
