Chinese Builders Hardware Construction Material Equipment Suppliers and Manufacturers

Door Hinges-3

Door Hinges-2

Door Hinges-1

Door and door quick installation system. DISCOVER THE INTER-JOIN DIFFERENCE SKIRTINGS ARCHITRAVES DOOR UNITS WINDOW REVEALS THE COMPLETE FINISHING SYSTEM We set-out to improve the quality and efficiencies of the home and apartment finishing process Delivering a higher quality finished product More cost effective than traditional methods Significantly faster, simpler and safer installation process Easy installation of pre-finished and pre-assembled door units Achieve an eco-friendly product made from recycled materials Built-in design tolerances to mitigate the necessity for accuracy Reduction in on-site labour - finishing, painting and tiling Elimination of finishing defects 100% termite resistant finishing material 100% Waterproof We achieved it! The Inter-Join finishing system eliminates all of the quality & labour issues associated with the traditional finishing process Eliminates: Skilled labour associated with hanging doors Eliminates: Skilled labour associated with butt hinges recessed into doors and jambs Eliminates: Labour associated with fitting locks Eliminates: Mitre cuts required for skirting and architraves Eliminates: Gap filling sealant around skirting and architraves Eliminates: Cut-in painting around skirting/walls and architraves Eliminates: Intricate tile cutting of floor tiles and addition of sealant around door jambs Eliminates: Trimming door jamb & window reveals Resulting in increased productivity & cost savings THE INTER-JOIN DIFFERENCE DELIVERING A HIGHER QUALITY FINISHED PRODUCT SIGNIFICANTLY FASTER, SIMPLER AND SAFER INSTALLATION PROCESS MORE COST EFFECTIVE THAN TRADITIONAL METHODS INSTALLATION READY, PRE-FINISHED, AND PRE-ASSEMBLED DOOR UNITS ECO-FRIENDLY PRODUCT MADE FROM RECYCLED MATERIALS BUILT-IN DESIGN TOLERANCES THAT MITIGATE THE NECESSITY FOR ACCURACY REDUCTION IN ON-SITE LABOUR - FINISHING, PAINTING AND TILING ELIMINATION OF FINISHING DEFECTS MATERIALS ARE 100% TERMITE RESISTANT MATERIALS ARE WATERPROOF DOORS, SKIRTING AND ARCHITRAVES ARE FILM WRAPPED FOR PROTECTION All Door Units are pre-finished, assembled and ready for immediate installation Residential door manufactured from completely waterproof composite (WPC & Wooden) material Residential doors are available in varying styles and designs Commercial doors manufactured to precision from high quality Aluminium Composite Panels, entirely processed on our patented, computer operated door machine Residential and commercial hardware available

Door Handle-5-20

Door Handle-5-19

Door Handle-5-21

DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.

Product Name: Drilling Machine Detailed product parameter description: Product model: ZOJET Z3050*16/1 Workbench size (mm): 500*630 Maximum drilling diameter (mm): 50 Distance from spindle centerline to column generatrix (mm): Maximum 1600 Minimum 350 Distance from spindle end to base working surface (mm): Maximum 1220 Minimum 315 Spindle travel (mm): 315 Horizontal moving distance of the spindle box (mm): 1250

Product name: Deep hole drilling and boring machine Detailed product parameter description: Product model: Texas deep hole drilling and boring machine (T2120) Main technical specifications and performance Technical specifications parameter Working scope Maximum boring diameter 200mm Drilling diameter range N40-N80mm Maximum boring depth 1000-8000mm Working support diameter range 60-300mm Spindle Spindle center height 350mm Headstock spindle bore 75 Spindle front end taper hole 85mm1:2 Spindle speed range 61-1000r/min 12 types Feed Feed speed range (stepless) 5-1000mm/min Fast moving speed of carriage 2m/min Motor Main motor power 30kW Hydraulic pump motor power 1.5kW Power of fast motor of carriage 3kW Feed motor power 4.4kW Cooling pump motor power 5.5kW4 groups other Cooling system rated pressure 2.5MPa Cooling system flow 100 200 300 400L/min Rated working pressure of hydraulic system 6.3MPa The oiler can withstand the maximum axial force 6.3KN Maximum preload force of the oiler on the workpiece 20KN Dimensions and weight length parameter 1000 2000 3000 4000 5000 6000 7000 8000