It is mainly used for exterior wall construction, decoration, cleaning and maintenance of high-rise buildings.
The safety lock automatically fasten the steel wire rope within 100mm, when the load cable is stuck or broken, out of hoist or the platform is inclined.
The platform can be made of steel or aluminum alloy according to your desire.
The specifications are as follows,
Model: Zlp 630 Zlp 800
Rated loading capacity: 630kg 800kg
Lifting speed: 9.6m/min 8m/min
Length of the platform: 1m-6m 1m-7.5m(according to the customers' desire)
Standard length: 2m*3 set 2.5m*3 set
Weight of the platform: 358kg 450kg
Power of the motor : 1.5kw*2set 2.2kw*2set
Model of the hoist : ltd6.3 Ltd8.0
Tamping rammer
Mt72f (tamping rammer)
Technical specification
Engine: air-cooled, 4-cycle, single cylinder
Engine type: petrol, robin eh12-2d
Power (hp): 3.5
Weight (kg): 72
Impact force (max.) kn: 13.7
Jumping stroke (max.) : 85mm
Size of foot mm:340*285
Dimensions mm: 720*410*1043
Fuel tank l: 2.5
Impact number (number per minutes): 640-680
Features:
Tamping rammer
1. 4-cycle petrol engine and diesel
2. Double cleaner system
3. Heavry-duty shock rubber absorb kickbacks
4. High-density polyethylene fuel tank eliminate corrosion
5. Rack and pinion throttle lever
6. Laminated wood (plywood) and steel well absorb shock and stress
Walk-behind power trowel
Wg30 (power trowel)
Technical specification
Engine: air-cooled, 4-cycle, single cylinder
Engine type: petrol, honda gx160
Power (hp): 5.5
Weight (kg): 64
Rotor diameter (cm): 76
Guard diameter (cm): 79
Number of blades: 4
Finish blades (cm): 15*27
Combination blades (cm): 15*27
Features:
Edging power trowel
Low maintenance and long-life design
An economical solution for troweling small surfaces, edges and corners.
1. Independent rotating flywheel, allowing operation in tight corners
2. Foldable handle easy for transportation and storage
3. Lifting hook is available as standard
4. Over-built gearbox assure a superior finish
5. Heavy-weight design to assure a superior finish
6. Height adjustable handle, assures operator comfort and easy control
7. Centrifugal safety switch, shuts the engine down in the event of the operator loosing control of the people
8. Screw control ensures precise blade adjustment
9. Throttle control is available as optional
Single drum vibratory rollers
Wy
Technical specification
Technical specification
Engine: air-cooled, 4-cycle, single cylinder
Engine type: honda gx120 / kama kg160
Power (hp): 5.5
Weight (kg): 168
Frequency (vpm): 4620
Centrifugal force (kn):10
Water tank (l): 16
Roller size (cm): 56
Features:
Mainly used to ram the asphalt surface and gravel, sandy soil
1. Small operating radius, can work within small area
2. Self-locking reverting mechanism, make sure reverting easily and operating conveniently
3. For handrail, adopts plane gear adjusting mechanism, not only suitable for people with different heights to operate, but also can be transported easily
4. Top grade practical long-distance throttle controlled lever
Features:
Low maintenance design
Best choice for compaction of sand, gravel, grit, granular materials.
1. Vibration isolated reversible handle for ease of operation and reduced operator fatigue
2. Conveniently placed handles
3. Open design reduces dirt building
4. Centrally mounted fully enclosed exciter for an even spread of compactive force over the whole base plate
5. Heavy-duty shock mounts reduce vibration to the upper engine
6. Protective frame is available as optional
7. Water tank is available as optional
Optional
Rubber mat
93kgs
42543 Builders Hardware Construction Material Equipment Suppliers
Short on time? Let Builders Hardware Construction Material Equipment sellers contact you.
1Its very rigid body frame is welded by shaped steel tube, no deform.
2It can perform horizontal, vertical directions and cubic 3 directions cut.
3Built-in converter is used for wide scope speed so is motion stable and a fit slow feed back.
410KVA malt lead special transformer is multi-lead for poly step voltage adjust, so is high production efficiency and long use life.
Specification and parameter
Type Unit XMC-2000 XMC-3000 XMC -4000 XMC-6000 XMC-8000
Items
Cutting block size MM 2000-1300
-680 3000-1300
-680 4000-1300
-1300 6000-1300
-1300 8000-1300
-1300
Over all dimension MM 4500-1640
-2700 5800x1950
x1850 6800x1950
x2450 8800x1950
x2450 10800x1950
x2450
Weight Kg 800 1000 1200 1600 2000
Power Kw 11.2KW 11.2KW 11.2KW 11.2KW 11.2KW
1.Size of Coil1220+¼-0.71.2+¼-L; aluminum,prepainted steel or GI steel coilYield strength G550Mpa
2.Working speed15m/min(not include cutting)
3.Roll station24stations
4: Material of roller: 45forge steel, polished and coated with chrome
5: Material of main shaft:45forge steel diameter roller90mm
6.Main power22Kw
7.Hydraulic station power5.5Kw
8.Hydraulic pressure12 Mpa
9.Control Panel: PLC, Simenz
10. Material of blade Cr12Mov
11.Thickness 0.81.2mm
12 Tolance3m+-1.5mm
13 Way of drive:one inch chain
14 380V 50HZ
15 Uncoiler: 10Ton Manual passive uncoiler
16 Three roller which can curve the final product according to the profiles
1.1 Main dimension: 11400 x 1600 x 1800mm
1.2 Total weight: 14000kg
1.3 Main motor: 18.5kW
1.4 Hydraulic motor: 5.5kW
1.5 Hydraulic pressure: 15-20MPa
1.6 Steps of rollers:
Feeding & guiding: two sets
Leveling: one set, seven rollers
Main forming: 17 steps
Rib making: one step
Rectifying: one step
1.7 Forming speed: 15 m/min maximum
1.8 Changing speed from one profile to another or from one size to another size: 3 minutes.
1.9 Purling specifications:
For C purling: 100-350mm
For Z purling: 100-350mm
1.10 Suitable material: 1.6-3.2mm, Q195~235 cold rolled steel, hot-zinc coil
1.11 Material of rollers: GCr15, 9CrSi, quenched
1.12 Material of rib roller: GCr15, 40Cr, quenched
1.13 Shape of rib: slash rib
1.14Dimension of punch adjustable:45-500mm
Vertical and horizontal centrifugal casting bronze crusher bushings, flange bushings and washers.
Material available: Most of brass/bronze according to ASTM, DIN and ISO standard.
Dimension available: OD<1200mm, Length < 1400mm
Year:2003
Engine:nisson
Chassisi:nisson
Boom:4 sections
Base boom:10.7 m
Full-extent boom:32.4m
Capacity:25 ton
Place of origin:japan
Front cab:left side
Back cab:right side
Overall length:12.9m
Overall width:2.5m
Overall height:3.4m
Max speed:75km/h
Priceú¦us$50, 000 fob shanghai
The prcie negonitable
Original computer controlled
The JKY modelíóJKB modelíóJKR model are advanced twin-stage vacuum Brick Presses which draw lessons from the developed domestic, abroad experiences and design to make .They are mainly made of high quality steel with features of reasonable structure, sturdy and durability. And they have strong applicability, high efficiency, easy maintenance but lower energy consumption. They are applicable for the production of high-rate hollow bricks with the materials of coal gangue, shale, high-volume fly-ash, urban construction waste, gangue waste, inferior soil.
Load the material for grinding evenly and continuously into the grinding chamber of the main frame. Due to the centrifugal force in rotation, the roller swings outward and presses closely upon the ring. The shovel carries the material to the space between the roller and ring. When the roller rolls, the material is thus ground.
After being ground, the material is to be routed to the sorter along the wind belt of the blower and the coarse powder will be put back to the mill for regrinding. The fine powder flows into the cyclone collector together with airflow and is expelled from the discharge pipe as final product.
In the grinding chamber, since the material may contain moisture to some extent, the heat generated during grinding makes the moisture evaporated; since the pipeline joints are not airtight, the external air is sucked in and the circulation air amount increases. In order to enable the mill to work under negative pressure, the increased airflow is guided to the deduster anew sequentially to the atmosphere after purification.
Ball mill is an efficient tool for grinding many materials into fine powder. The Ball Mill is used to grind many kinds of mine and other materials, or to select the mine.2 It is widely used in building material, chemical industry, etc. There are two ways of grinding: the dry way and the wet way. It can be divided into tabular type and flowing type according to different expelling mine.
To use the Ball Mill, the material to be ground is loaded into the Neoprene barrel that contains grinding media. As the barrel rotates, the material is crushed between the individual pieces of grinding media that mix and crush the product into fine powder over a period of several hours.
Quite simply, the longer the Ball Mill runs, the finer the powder will be. Ultimate particle size depends entirely on how hard the material you're grinding is, and the time how long the Ball Mill runs. Our Ball Mills have been used to grind glass, powder food products, creat custom varnishes,make ceramic glaze, powder various chemicals, and make Black Powder.
42543 Builders Hardware Construction Material Equipment Suppliers
Short on time? Let Builders Hardware Construction Material Equipment sellers contact you.
