After over decade of efforts, we have developed a new novel and world leading proprietary pellet cleaning system and auxiliary product, the product line is standardized. We have passed certifications like CE etc. and every equipment sold is under ensurance by top insurance company. Our product has been used in a Germany - China polymer joint venture company, the effect is very good. Our Pellet Cleaning Technology and Spotlesser has fundamentally solved the world problem of separating dust/fluff/streamers from pellets, with characteristics of disinfecting, sterilizing and no radiation, the result after purification could reach down to 30 ppm or less. Features: Cleaning with high precision, streamer removal rate up to 99.9% after optimization, dust removal down to 30 ppm; Lower pellets carryover rate, no degradation of pellet particles: Full range of models, capacity from 30 kg/hour up to 100 ton/hour: The Spotlesser is compact in height and could be used in a wide range; High safety level, innovative open loop system with over 10 years of safe operation records in China; No electromagnetic/magnetic field radiation, no electric field radiation, Low noise level, fully compliance with HSE Long term continuous operation; With complete knowhow and intellectual property right; Multiple featured option for customer's selection, tailor made as per specific requirements on site.
The raw material should be dried by the dryer (The moisture content is about 15%) Feed into briquette machine High temperature and high pressure, curing, stamping forming Cooling Package Leave the factory. The main motor is driven by the eccentric wheel to move 280 times per minute. The screw feeding machine starts to feeding the raw material, then the raw material will feed into the briquette machine of the feeding box by the dealer, and then will into the press room by the screw delivery from the left and right sides. The raw material will be pressed by the punch and mold, then heating-up and soften, and the volume is smaller.
Biomass screw extrusion briquette machine adopts the screw extrusion principle which biomass powder extruded into briquette. It is suitable for agriculture and forestry waste. For example, corn, sorghum, soybeans, cotton, rapeseed, peanut, sunflower straw, chaff, grasses, sawdust, twigs, bark, bamboo shavings, bagasse, etc. Great product density, small volume, good combustibility, and alternative fuel for wood and coal as fuel, which also can be used as a carbonized material.
Dingli Sawdust Dryer: Sawdust dryer is used for pellet sawdust or powder sawdust. Wet materials are continuously sent into the drum through screw conveyer and then get separated and pushed by the high-speed hot flow. The moisture in wet materials is taken away in this process and then we get powder or pellet dry materials. Sawdust dryer is widely used for the drying of straw briquette, charcoal, wood pellet fuel, sawdust briquette, corn straw, soybean straw, cotton stalk, wheat straw, sorghum stalk, wood shavings, sawdust, gingko leaf, mulberry leaves, and other fiber materials. Sawdust dryers are consist of heating furnace, feeding port, drum, filter drum, conveying pipe, cooling drum and discharging port.
Biomass energy is second only to coal, oil and natural gas one of the world's total energy consumption 4th. According to experts predict that biomass energy is likely to become an important part of the future sustainable energy system. In the middle of this century, using new technology to produce all kinds of biomass alternative fuels will account for more than 40% of total global fuel consumption. According to the demand of market, our technical team designs and manufactures the equipment of biomass pellet production line, which are suitable for the biomass material with the 35-56% moisture to make pellet,such as sawdust, bamboo shavings, wood shavings,barley straw, oat straw, wheat straw, rye straw, rice straw, rice husk, bagasse, sorghum straw, corn straw, beans stalk, peanut vine stalk,etc. We also help optimize the drying and pelleting process according to the property of different biomass materials, production scale, application requirements, cost control, automation level, and site condition.
Wood Powder Burner PRODUCT FEATURE 1.Easy to operate and use, the machine adopts PLC control panel which can realize small fire-middle fire-big fire. Customize electrical components according to customers requirements, there are domestic components and imported components available, we will offer free replace parts within one year because of quality problem. 2.The combustion furnace adopts 3-layer thermal insulation, the inner furnace adopts high aluminum refractory ,anti-souring and high temperature resistance. Outside of the furnace, it uses water cooling system, make sure the furnace have long usage life, and operation more stable. 3.Pyrolysis and gasification through negative pressure, secondary combustion,smoke treatment system, eliminate the secondary pollution completely, up to European emission standard. 4.The product working principle adopts ultra-low nitrogen combustion technology, multiple air increasing, high temperature pyrolysis, semi-gasification suspension combustion,use heat convection and radiation at the same time, combustion last for more than 2 seconds, high-speed combustion and no dead corner. 5.High thermal conversion efficiency, heat efficiency can reach 90%-95% generally, stable continuous operation, easy to operate and maintenance . 6.Well sealing measures and negative pressure furnace, ensure no gas leakage. APPLICATION SCOPE 1.Fuel gas/oil/coal boiler industry (steam boiler, thermal oil furnace, hot water boiler) 2.Smelting Industry (aluminum melting furnace, reverberatory furnace) 3.Drying Industry (food drying, sawdust/wood chips/biomass drying) 4.Spray Coating Industry (metal spraying, electroplating heating) 5.Greenhouse, Building Industry (asphalt heating) -
Compressed Wood Pellets Specification: Diameter: 6mm or 8mm Length: 0.5cm-10cmcould be adjusted according to customer’s request Calorific Value: 4200 Kcal/Kg Moisture: 8% Ash: 1% Density: 1100KG/m3 Blackness of Exhaust Fume: Ringelmann 1 Package: 25kg woven bag or according to customer’s request.
Compressed Fodder Pellets Specification: Material: alfalfa Protein: 14 to 18% Fiber: 22% max Moisture: 13% max Ash: 10% max Fat: 2% max
Pine Cat Litter Specification: 1.Material: Pine Sawdust 2.Diameter: 6mm or 8mm 3.Length: 0.5cm to10cm (couldbeadjust edaccording to customer's request) 4.Moisture: 8% max 5.Ash: 1% max 6.Density: 1.1g/cm3 7.Water Absorption: 220%-300% 8.Deodorization Rate: 60to90% 9.Package: 10Lb, 20Lbbagor according to customer's request.
Cas:108-31-6; Purity99.5%min; Type:flake and briquette; It is used to produce unsaturated polyester resin, coating, plastic. 25kgs per plastic woven bag lined with pe bag, 22mts/20'fcl(with pallet) or 24mts/20'fcl(without pallet).
Place of Origin China Density 1100-1300KG/M3 Min Diameter 6-8mm Length 10mm~40mm Ash Content (%) 100 Package Type: PVC shrink film + 30cm cardboard liner + carton + plywood pallet with at least 5cm legs Product name Wood Pellets Warranty More than 5 years After-sale Service Online technical support Project Solution Capability graphic design Application Apartment Design Style Modern Place of Origin Fujian, China Usage Indoor Size Customerized Material Radiate Pine Color Customerized MOQ 1X20GP Packing Standard Delivery time 25 Days Transportation By sea
Ningbo Yinzhou Guoten Industrial Co. Ltd. / C-MART was founded in 2006 and has a production capacity of 120,000 tons/year of A1 wood pellets crafted from high-quality wood fibers from sustainable sources, making them an ideal choice for both residential and commercial heating applications. In addition to production and the opportunity to be a reliable, long-term partner, we follow every production process including bagging and the ability to customize the bags with your company logo using packaging materials suitable for European market standards. Our assistance is also valid for shipping: we regularly ship pellets in bulk one-ton bags in 20' containers (18 tons) or pellets bagged in 15 kg bags in 40' containers (26 tons). Our proposal on shipping for July 2023 if the buyer does not have his satisfactory shipping quote is, for example, HAMBURG, SOUTHAMPTON, FELIXSTOWE, LE HAVRE, ROTTERDAM, ANTWERP at the price of 875 Euro for 20' container, 1500 Euro for 40'HQ container, with MSC global shipping company. This is the CFR price, insurance and customs clearance are not included. For invoice, informations or to book a visit to our production plant please contact us:
we are a company from China, we can supply wood pellets. Our products have ENPLUSA1 and A2 certificate and can be sold in the EU. If a large quantity of goods is required, we need to ship them by sea from China. (starting from 10,000 tons). We are willing to cooperate with you and provide you with low price products.
100% pine wood pellets, ENplus class A1 certification, big bag(1000kg+-5%).
100% pine wood pellets, ENplus Class A1 certification, 15kg bags.
Everflon Fluoropolymer FEP Resin Everflon® FEP resin is a melt-processible copolymer of tetrafluoroethylene and hexafluoropropylene, without additives, that meets the requirements of ASTM D 2116 Everflon FEP fluoroplastics are processed by conventional melt extrusion techniques and by injection, compression, transfer and blow molding processes. Everflon FEP fluoroplastics are ideal for wire coating and molding a wide variety of end use articles and components. Everflon FEP offers an excellent combination of properties characteristic of all fluoroplastics; a wide service temperature range, exceptional dielectric and electrical properties, low coefficient of friction, low flammability and chemical resistance. Everflon FEP has a service temperature range, up to 200°C (392°F). While Everflon FEP can be fabricated into solid shapes and molded articles it is best known as an industry leading product line in the wire and cable industry where it is used for wire coating and cable jacket fabrication. Everflon FEP offers wire and cable OEMs a high performance fluoroplastic material with excellent electrical properties, ease of processing and consistent performance. The Everflon FEP product line is one the broadest in the industry. With Melt Flow Rates (MFR) from 3 to 30, and a wide range of application specific grades, Everflon FEP is uniquely positioned to offer exceptional performance in both general purpose and high speed wire and cable constructions.
Product introduction: Wood Sterol, getting from plant asphalt, commonly known as Tall oil, White-like powder obtained by distillation followed by primary crystallization. Product Application It can be used as functional food ingredients, as a important raw materials in steroidal produce. Specifications: 99% Wood sterols
Fruits like apples, oranges, papaya, pear, lemon, kiwi, loquat, melon, vegetables like potatoes, garlic, tomato, ginger, carrots, cucumber, pepper, onion, garments, face mask, coffee beans, windows and doors (a different kind), glasses (different of glasses), sun houses, wooden pellets furniture, pet products kids toys.
Biomass fuel .
Wood pellets.
