Find Verified Medical Sensors Suppliers, Manufacturers and Wholesalers

Infrared optical sensor 110mm-50000mm sensing range IP67 Available in diffuse mode, retro-reflective mode(polarized filter), or through-beam mode. Available in 10-30VDC or 12-240VDC/24-240VAC operating voltage Available in Light/Dark selectable, PNP/NPN selectable 2 meter cables and connector version available Quick disconnect models available. Export standard packing.

Product Description WDS308 Integrated dust monitoring sensor is a specialized small instrument applied to monitor dust at construction sites. It can monitor eight meteorological elements, wind speed, wind direction, air temperature, air humidity, air pressure, rainfall, radiation, UV index, and can also monitor three environmental factors, PM2.5, PM10 and noise. The system is modularized and can be configured flexibly. Small volume, low cost, and it suitable for industrialized intensive stationing monitoring. Features l Maintenance free design l Standard output protocol RS485 l Small volume, light weight l Installation height is unrestricted l Low power consumption, high precision l Integrated dust monitoring system l China's first production company

Capacitive proximity sensor1mm-35mm sensing range IP67 Available in PBT Housing/Nickel plated brass Housing Available in 10-30VDC or 20-250VAC or 20-250V DC/AC operating voltage Available in NO/NC selectable, PNP/NPN selectable 2 meter cables and connector version available Quick disconnect models available. Export standard packing.

Ultra-Mini Housing: diameter with 3mm, 4mm, 5mm and square 5mm - Compact - Precise - Fast response IP67 Sensing range 0.6-1.2mm Operating voltage: 10-30VDC Cable and connector version available . Export standard packing.

Total more than 2, 000 kinds of models available Standard / Extended / Long sensing range; ReliableSteady 2-3times sensing range Supply ability 10000pcs/ month Eg: BN-M3040P-C11S12 Dia. 30mm, PNP, SN=40mm,IP67 Have achieved CE certification . Just directly replace the similar ones from the European, American, Japanese and other world-famous brands. Export standard packing.

Metal face inductive proximity sensor High protection class Against impact Anticorrosive M8, m12, m18, m30sn=1--15mmunflush/flushDC 3 wires 10-30vavailable PNP or NPN available N.O. or N.C. available with 2m pvc cable or connector IP67 have achieved CE certification. Just directly replace the similar ones from the European, American, Japanese and other world-famous brands. Export standard packing.

Fence Vibration Sensor A fence vibration sensor is a security device designed to detect and alert you to any vibrations or movements occurring along a fence or perimeter. How a fence vibration sensor typically works and its key features Detection Technology: Fence vibration sensors employ various technologies to detect vibrations or disturbances along a fence. Common detection methods include piezoelectric sensors, accelerometers, and seismic sensors. Installation: These sensors are typically mounted on or near the fence or barrier that you want to monitor. They should be strategically placed to cover vulnerable or critical areas. Sensitivity Settings: Many fence vibration sensors allow you to adjust their sensitivity to different levels of vibration. This helps reduce false alarms caused by minor disturbances like wind or small animals. Wired or Wireless: Depending on the model, fence vibration sensors can be either wired or wireless. Wireless sensors are more convenient to install and can transmit alerts to a central control panel or a connected security system. Alerts: When the sensor detects vibrations or movements, it can trigger various types of alerts. These may include sounding an audible alarm, sending notifications to a security monitoring service, or activating security cameras. Integration: Fence vibration sensors are designed to integrate with existing security systems or smart home platforms. This allows you to monitor and control them through a smartphone app or a centralized control panel. Power Source: These sensors can be powered by batteries or connected to a power source. Battery-powered sensors are more versatile and can be placed in remote areas without access to electricity. Weather Resistance: To withstand outdoor conditions, fence vibration sensors are often built to be weather-resistant or even waterproof. Ready to install into any new or existing type of perimeter fence: wire, chain link, welded mesh, razor wire, lard wire Applications of fence vibration sensors include Intrusion Detection: They can detect unauthorized attempts to breach a property's perimeter, alerting property owners or security personnel. Asset Protection: Industrial facilities often use fence vibration sensors to protect valuable equipment, machinery, and materials. Wildlife Monitoring: In some cases, these sensors are used to monitor wildlife movements or detect the presence of animals near a fence, such as in conservation areas or farms. Critical Infrastructure Protection: These sensors are crucial for securing critical infrastructure like power plants, data centers, and military facilities.

FEATURES Suitable for 5A, 10A cable online measurement. Holding wire diameter: 8mm Dimension: 42.6mm 122.5mm 23mm Load capacity: 4 Installation: clamp type Output mode: lead output PARAMETERS Electrical parameters Ratio 1000: 1 or 2000:1 (customized) Accuracy class 0.2%, 0.5% Primary current 0 - 10A AC Secondary current 0 - 10mA AC (customized) Max. Cont. Input current 12 A Load capacity 4 Over voltage category CAT III 600V Output signal (AC current) From 0 to 10mA AC at nominal input current Output signal (AC voltage) From 0 to 1V AC at nominal input current Frequency range 40Hz-2000Hz Dielectric strength 3KV 50Hz/60Hz at 1minute Temperature range -20C to +55C Output 2.5 meter cable with D01 connector Max. voltage not insulated conductors 600 V Standard EN 61010-1, EN 61010-2-032, IEC60044-1 Installation Clamp type Output mode Lead output(2.5m) Mechanical parameters Dimensions (L x W x H) (mm) 42.6 122.5 23 Weight (g) 225 Holding wire diameter (mm) 8 Max. jaw opening (mm) 8 Color Gray Material PC+ABS+Polycarbonate, UL94 V0

MCC-X2 Cantilever, low contour ,excellent natural linear , anti-side ability, the unique shape allows easily installation and widely utilizes in electronic scales. Specification: Range:00, 150, 200, 300, 500, 800 kg 1, 1.5 t Supply voltage:10V or 12V,15V,24V (DC) Output signal:1.5mV/V or 0~5V,1~5V,0~10V, 0~10mA,0~20mV, 4~20mA Non-linearity:0.05-0.1 % F¡¤S Hysteresis:0.05-0.1 % F¡¤S Non-repeatability :.05-0.1 % F¡¤S Temperature drift :.003 F¡¤S/¡æ Zero output :2 % F¡¤S Operating temperature :20~80 ¡æ Overload 150% :¡¤S. Standard export package.

MCC-F load cell uses the beam structure ,the high accuracy, low contour, sealed , stable performance; has strongly anti-torsion, anti-side ability, is suitable in electronic weighing apparatus and so on for automobile scale, track scale, platform scale, bunker scale, crane, and compression testing machine. Specification: Range: 0.3,0.5,1,2,3,5,10,20,3050,100 t Supply voltage :10V or 12V,15V,24V (DC) Output signal :1.5mV/V or 0~5V,1~5V,0~10V, 0~10mA,0~20mV, 4~20mA Non-linearity: 0.03-0.1 % F¡¤S Hysteresis :0.03-0.1 % F¡¤S Non-repeatability :0.03-0.1 % F¡¤S Temperature drift: 0.003 F¡¤S/¡æ Zero output: ¡Ü2 % F¡¤S Operating temperature :-20~80 ¡æ Overload :150% F¡¤S. Standard export package.

Model HQ15-A5 HQ15-A100 Rated primary current 5A AC 100A AC Output Voltage 10 mV AC/A 1mV AC/A Maximum input current 50A AC (Continuous) 130A AC (Continuous) (45-66Hz,Ambient temp.50C) Amplitude accuracy ±0.3%RD ±0.02%FS (10%-100%I1n),(45Hz- 66Hz) Phase accuracy ±2 (10%-100%I1n)(45Hz-5kHZ) The amplitude frequency characteristic ±0.1% (45Hz-5kHZ)(Deviation accuracy) Conductor impact ±0.5 (Off-center) The influence of external lectromagnetic fields 0.1A (In AC 400A / m electromagnetic fields) Temperature coefficient ±0.02%/C of the reading data Dielectric strength 3000 V AC rms/Continue 15 seconds(Circuits-iron core, iron core-shell) The maximum rated voltage 300V AC rms Applicable standards Safety: EN61010-2-032:2002,300V CAT III, Contamination II EMC: EN61326:1997+A1:1998+A2:2001+A3:2003(Class A) Mechanical parameters Measurable conductor diameter Max.15mm Cable length About 3m Dimension (W x H x D) About 46135 21 (Excluding protruding parts) Weight About 230g Environmental conditions Operating temperature 0 to 50 C (32-122 F) Operating humidity 80%RH(No condensate) Storage temperature -10 to 60 C (14-140F) Storage humidity 80%RH(No condensate) Operating environment Indoor, altitude up to 2000 meters

FEATURES Suitable for 10A-200A cable online measurement. Holding wire diameter: 20mm Dimension: 52.5mm137.5mm28mm Load capacity: Installation: clamp type Output mode: lead output PARAMETERS Electrical parameters Ratio 1000: 1 or 2000:1 (customized) Accuracy class 0.1%, 0.2% Primary current 0 - 200A AC Secondary current 0 - 200mA AC (customized) Max. Cont. Input current 240A Load capacity 4 Over voltage category CAT III 600V Output signal (AC current) From 0 to 200mA AC at nominal input current Output signal (AC voltage) From 0 to 2V AC at nominal input current Frequency range 40Hz-2000Hz Dielectric strength 3KV 50Hz/60Hz at 1minute Temperature range -20C to +55C Output 2.5 meter cable with D01 connector Max. voltage not insulated conductors 600 V Standard EN 61010-1, EN 61010-2-032, IEC60044-1 Installation Clamp type Output mode Lead output(2.5m) Mechanical parameters Dimensions (L x W x H) (mm) 52.5 x 137.5 x 28 Weight (g) 400 Holding wire diameter (mm) 20 Max. jaw opening (mm) 20 Jaw color Red, yellow, blue, green, black Material PC+ABS+Polycarbonate, UL94 V0

FEATURES Suitable for 10A-200A cable online measurement. Holding wire diameter: 20mm Dimension: 52.5mm 137.5mm 28mm Load capacity: 4 Installation: clamp type Output mode: lead output PARAMETERS Electrical parameters Ratio 1000: 1 or 2000:1 (customized) Accuracy class 0.1%, 0.2% Primary current 0 - 200A AC Secondary current 0 - 200mA AC (customized) Max. Cont. Input current 240A Load capacity 4 Over voltage category CAT III 600V Output signal (AC current) From 0 to 200mA AC at nominal input current Output signal (AC voltage) From 0 to 2V AC at nominal input current Frequency range 40Hz-2000Hz Dielectric strength 3KV 50Hz/60Hz at 1minute Temperature range -20C to +55C Output 2.5 meter cable with D01 connector Max. voltage not insulated conductors 600 V Standard EN 61010-1, EN 61010-2-032, IEC60044-1 Installation Clamp type Output mode Lead output(2.5m) Mechanical parameters Dimensions (L x W x H) (mm) 52.5 x 137.5 x 28 Weight (g) 400 Holding wire diameter (mm) 20 Max. jaw opening (mm) 20 Jaw color Red, yellow, blue, green, black Material PC+ABS+Polycarbonate, UL94 V0

The Primary current sensor uses the same sensor technology as the original Rogowski coil. The True RMS inductive sensor does not use magnetic materials. The opening of the sensor is electronically closed and external currents are electronically rejected. The accuracy, external current reject, and range of currents measured by the patented amp sensor substantially exceed the performance of the best clamp-on sensors. The key feature of the unit is the ability to leave it deployed on the line to record readings every 15 minutes for 90+ days. It easily attaches to the line with a standard insulating bar. Once on the line, it immediately begins to collect and record the primary current on the line. The Primary current sensor is equipped with a 433M wireless port for communicating the recorded data into the userâ??s PC. The data is downloaded through GF2018S PC-Link Software, which allows the user to download, view and query the data stored on the Primary current recorder. The housing of the Primary current sensor is made of ABS+PC and is built to operate safely, even in severe utility environments. It is resistant to shock, waterproof and resistant to flame. It also operates within a wide temperature range. The Primary current recorder has a screw insulation bar of installation, which allows it to hang on the line securely in all weather conditions. PC-Link Software is a user-friendly software interface that allows the user to download, view, graph and export data from the Primary current recorder into Microsoft Excel. The data directly transfers from the Primary current recorder into Excel through an 433M Port. PARAMETERS Basic parametersã?? Recording ammeter kit 3 wireless current sensors (GF2018A, GF2018B, GF2018C) 433 HHT(handheld terminal) or 433M wireless data reader(GF2018R) PC-LinkSoftware software(GF2018S) Carrying case Data recording interval 1min, 5min, 10min,15min, 30min; Time can be set from 1 second to 60 minutes Communication distance(wireless) Max 100m Communication 433M, 868M or 915M (option) Installation Installation with electricity; Disassemble with electricity Battery 3.6 volt lithium battery,9000mAh; Battery can be replaced Software requirements PC-Linksoftware & microsoft Excel Processor 100 MHz or higher (200 MHz or higher recommended) RAM 32 MB, 64M recommended Drive space 15 MB to load software, 10 MB of operating Space Use of position Outdoor or indoor Electrical parameters Range of operation Voltage 69kV,35kV,20KV, 10kV, 6kV, 0.38kV Current 0 to 400A; 0 to 800A; 0 to 1500A; 0 to 3500A; Sensor opening Up to 3.3 cm Resolution Amps 1 to 99.9A 0.1A 100 to 300A 1A Amps accuracy ±1% of reading plus 2 counts Frequency 60Hz (57-63 Hz) or 50Hz (47-53 Hz) models available Mechanical parameters Weight (kg) 0.48 Carrying case(kg) 6.5 Environmental conditions Operating temperature -40C to 60C

The FQ-RCTA02 rogowski coil flexible current sensor is designed for easy installed in tight spaces and without the need for dismantling the primary busbar or cables. It includes a flexible Rogowski coil probe and electronic modules. The signal from the coil probe can be amplified by the electronic amplifier modules through the integration processing. The output signal can be directly used in oscilloscope, digital multimeter or data logger recording instrument. good linearity, easy to use, measuring large current, 6000A/3V, 600A/3V, 60A/3V or 3000A/3V, 300A/3V, 30A/3V, lower phase shift. In particular, it can be installed in tight spaces, around cable bundles, around wide or large bus bars, or even wrapped around irregular shapes. Models range from 1 to 100,000Arms with an accuracy of 1% of reading. Rated EN 61010, 600V CAT IV, 1000V CAT III. This feature facilitates positioning the sensor around the conductor, enhances user safety, and alleviates the drooping effect associated with other flexible sensors. FEATURES

Product Description WES918 Environmental grid monitoring station is a miniature station developed by our company to measure multi parameter air quality.It can monitor nine environmental factors PM2.5, PM10, SO2, NO2, O3, CO, H2S, NO and VOC.It also integrates five meteorological elements air temperature, air humidity, wind speed, wind direction, air pressure. The system adopts modules for flexible configuration, small size, low cost, and is suitable for gridded, dense, and refined layout requirements. Features l Support calibration l Maintenance free and easy to install l Industrial standard design l Small volume, light weight l Integrated monitoring system l Low power, high precision

Product Name: Disposable Medical Coverall,Safety Protective Coverall Size: M/L/XL/XXL/XXXL Color: White/ Blue Certificate: CE,FDA Material: Anti-static Non-woven PP Fabric+PE breathable Feature: Anti-virus,Anti-static,Waterproof,Dustproof,Breathable Application: Hospital,Clinic,Public Places,etc

The HQ15 100a current probe sensor is designed for easy installed in tight spaces and without the need for dismantling the primary busbar or cables. The sensing head uses sliding push-fit clamp structure, safety isolation to avoid the user to contact with charged objects directly. It complies with CE standards and meets 300V CAT III safety class. This model HQ15 current sensor is a high accuracy mini current probe for measurements up to 130A AC. This current probe uses a special magnetic core to provide higher accuracy and lower phase shift. The HQ15 Series is an excellent probe sensor to be used in power and low level current measurement applications. FEATURES UL, CE CNAS mark Excellent linearity High content permalloy core Holding wire diameter: 15mm Frequency 10Hz-5kHz Bandwidth High time harmonics measurement Easy &quick installation in tight spaces; Measurement range of 1mA to 130A AC; Low phase shift for power measurement;   EN 61010-2-032 , 300V CAT III Standard Improved ergonomic design & easy operation; High precision 0.1% for current measurement Flexible and light weights, exquisite appearance;