The NXP MC56F800x family of digital signal controllers (DSCs) offer the functionality of a microcontroller with a flexible set of peripherals. The entry-level MC56F8006 and MCF56F8002 DSCs provide the most cost-effective solutions for mathematically intensive, power-sensitive, real-time control applications.
Features
DSP and MCU functionality in a unified, C-efficient architecture with up to 32 MIPS at 32 MHz core frequency
Up to 16 KB of Flash memory
Up to 4 KB of RAM
Integrated peripherals:
Up to 6-channel PWM module
Two up to 4-channel 12-bit ADCs
One serial communication interface (SCI) with LIN slave functionality
One serial peripheral interface (SPI)
One inter-integrated circuit (I2C) port
Up to 26 GPIOs
This product is included in Our product longevity program, with assured supply for a minimum of 10 years after launch
kbit / s size adjustable
Support L2 VPN, and EPL, EVPL, EPLn and EVPLn business
Offers a variety of service interfaces and management interface
1.SDH service interface
STM-1 electrical interface, STM-1/4/16 optical interface, STM-16 optical interfaces support given wavelength output can be directly docked with WDM equipment
2.PDH business electrical interface
E1, T1, E3, DS3, E4
3.Ethernet Interface
4.Clock Interface
5.Alarm Interface
6.Management interface
7.Official Interface
Cross-capacity
Cross clock board High order cross ability Low order cross ability
CXL1/4/16 20G 5G
Dc input poe
Pt-pse105g-e indoor single-port poe mid-span
Standard
1. Indoor using, 48vdc / 650ma, poe port 6kv (10 / 700us) surge-protection
2 Boost design, input voltage: 10-24vdc
3. Wide-temperature design: -40? - +65?
4. Rail slot on the back, can be fixed at guide rail
1. Boost poe injector
Pt-pse105g-e connected with switch to exchange data, supply power through cat5e cable to remote pd, effective distance is 100m.
2. Intelligence chip is inside, detective pd before supply power.
Pt-pse105g-e with intelligence chip inside, detective pd before supply power, if the pd is compliant with ieee802.3af / ieee802.3at standard, supply 48vdc power, if not do not supply power, avoid of device destroy and increase safety level .
3. External solar power supply system connected
Product allows 10-24vdc input and solar power panel is acceptable, output power is 30w, output current is 650ma, could powered for high power request pd, such as outdoor wireless base station, wireless ap, network cameras.
4. Better ambient temperature adaptation, convenience to fix.
Pt-pse105g-e's ambient temperature is good, -40? ~ +65 ?; with rail slot, can be fixed at guide rail.
649 Electric Components Suppliers
Short on time? Let Electric Components sellers contact you.
SDI-151 is a North seeker with digital display,constituted with dual degree of freedom dynamically tuned gyro,mechanical transmission and signal decoding circuit.Dual degree of freedom gyro has two basic features, procession and stable spin axis .Rotation axis of gyro remains the orientation relative to inertial space, oppositely, the earth rotates for its angular velocity . If take the earth as standard, the gyro's axis will be found rotating relative to the earth. Therefore, the gyro can track and measure the angular velocity of the earth.North seekers take advantage of this different component of angular velocity on X and Y axis, then get the reference axis position info/then get the system's position info by the rate difference on X and Y sensitive axis.
Feature
1.Easy to operate
2.Automated north-seeking
3.With digital display
4.Meet vehicle-mounted environment
Applications
1.Antenna positioning
2.Vehicle positioning
3.Radar positioning
Performance
Azimuth measurement range 0°~360°
Azimuth measurement accuracy 0.06°1s
Azimuth resolution 0.01°
North seeking time 3min
Prepare time 10min
Operation state static
Tilt angle measurement range(option) ±8°
Tilt angle measurement accuracy(option) ±0.06°
Digital display LCD
Communication ports
Serial ports RS-422/RS-232
Baud rate 9600bps
Electrical parameters
Ratio 1000: 1 or 2000:1 (customized)
Accuracy class 0.2%, 0.5%, 1%
Primary current 0 - 1000A AC
Secondary current 0 - 5A AC (customized)
Max. Cont. Input current 1200A
Over voltage category CAT III 600V
Output signal (AC current) 500mA,1A,5A AC at nominal input current
Output signal (AC voltage) 333mV,500mV,1V,5V AC at nominal input current
Frequency range 40Hz-2000Hz
Dielectric strength 3KV 50Hz/60Hz at 1 minute
Temperature range -20C to +55C
Output 2.5 meter cable with D01 connector
Max. voltage not insulated conductors 600 V
Standard EN 61010-1, EN 61010-2-032, IEC60044-1
Installation Clamp type
Output mode Lead output(2.5m)
Mechanical parameters
Dimensions (L x W x H) (mm) 163 x 310 x 34
Weight (g) 900
Holding wire diameter (mm) 110
Max. jaw opening (mm) 110
Jaw Color Black
Material PC+ABS+Polycarbonate, UL94 V0
JMY6281 is based on NXP PN512, CV520 chip design. It supports USB HID, UART or IIC interface and fully compatible with ISO14443 Type A, ISO14443 Type B protocols and also NFC function. The dimension is 50.8mm * 50.8mm * 7.5mm.
Jmy601 is based on nxp mf rc531, sl rc400, or cl rc632 chip design. It supports uart or iic interface and fully compatible with iso14443 type a and iso14443 type b and iso15693 protocols. The dimension is 60mm * 60mm * 5.7mm.
Description
Jmy601 is a series of rfid read/write module with uart or iic communication port. It has various functions and supports multi iso/iec standard of contactless card. The rf protocol is complex, but the designer combined some frequent used command of rf card and then user could operate the cards with full function by sending simple command to the module. The module and antenna is integrated. The impedance between rf circuit and antenna was tuned by impedance analyzer, and then the module has excellent performance and stability.
Main characteristics
Modules integrated antenna, excellent consistency and stability
light and slim
rf protocol in accordance with emv2010
Qualifications
Pcd: nxp mf rc531, sl rc400, cl rc632
Pcb layers4
Working frequency: 13.56mhz
Termsed standard: iso14443a, iso14443b, iso15693
anti collision ability: full function anti collision; be able to set multi-cards or single card
auto detecting card: termsed, default off, could be set
JMY6021 is based on NXP MF RC500, MF RC531, SL RC400 or CL RC632 chip design. It supports USB HID, RS232C, UART or IIC interface and fully compatible with ISO14443 Type A and ISO14443 Type B, ISO15693, and ISO7816(2 SAM Slots) protocols. The dimension is 100mm * 70mm * 10.6mm
JMY6122 is based on NXP CL RC663 chip design. It supports USB HID, RS232C, UART or IIC interface and fully compatible with ISO14443 Type A and ISO14443 Type B, ISO15693 and ISO7816(4 SAM Slots) protocols. Also it supports NFC functions. The dimension is 86.5mm * 65mm * 9.5mm.
JMY5011 is the second generation product based on JMY501 with UART and IIC serial port.JMY5011 has various functions and supports multi ISO/IEC standard of contactless card. The RFprotocol is complex. The designer combined some frequent used command of RF card and then usercould operate the cards with full function by sending simple command to the module.
The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability.
The module and antenna is split design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the modules performance and stability.
JMY6804 is based on NXP CL RC663 chip design. It supports USB HID, RS232C, UART or IIC interface and fully compatible with ISO14443 Type A and ISO14443 Type B, ISO15693 and ISO7816(2 SAM Slots) protocols. The dimension is 70mm * 50mm * 16.5mm.
JMY6804 is a series of RFID read/write module. It has various functions and supports multi ISO/IEC standard of contactless card. The RF protocol is complex, but the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module.
The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability.
Main Characteristics
Ferrite plate under the antenna, good performance for metal-around environments
EMV2010 certification ability in RF protocol part
2 SAM slots, full fill payment system usage
USB HID interface, convenience to use on PC
Qualifications
PCD model: NXP CL RC663
PCB Layersï¼?4
Working frequency: 13.56MHz
Termsed standard: ISO14443A, ISO14443B, ISO15693, ISO7816,NFC
Anti collision ability: Full function anti collision; be able to set multi-cards or single card
Auto detecting card: Supported, default OFF, could be set
SAM slots: 2, T=0 & T=1 9600, 19200, 38400, 55800, 57600, 115200bps
Data FLASH: 512 Bytes
Power supply: DC 5V (±10%)
Interface: USB HID, RS232C, UART or IIC by order
Communication speed:
IIC: Max.200Kbps
UART: 19200bps, 9600bps, 38400bps, 57600bps, 115200bps
USB: 2.0 HID class
Interface level: UART / IIC 3.3V (5V tolerance)
Max. command length:
JCP04: 253bytes
JCP05: 510bytes
Power consumption: Max. 150mA
Operating distance: 70mm (M1 typical distance, depending on card quality)
Dimension: 70mm * 50mm * 16.5mm
Weight: About 120g
ISP: Supported
RoHS: By order
CE certification: in plan (Jan.17,2015,soon)
Operating temperature: -25 to +85°C
Storage temperature: -40 to +125°C
The adjustable range of permeability10khz=15000~50000,
Excellent frequency characteristics
High saturation magnetic induction strength, 1.20t,
Lower eddy current losses
Excellent temperature stability
WES918 Environmental grid monitoring station is a miniature station developed by our company to measure multi parameter air quality.It can monitor nine environmental factors PM2.5, PM10, SO2, NO2, O3, CO, H2S, NO and VOC.It also integrates five meteorological elements air temperature, air humidity, wind speed, wind direction, air pressure. The system adopts modules for flexible configuration, small size, low cost, and is suitable for gridded, dense, and refined layout requirements.
Features
l Support calibration
l Maintenance free and easy to install
l Industrial standard design
l Small volume, light weight
l Integrated monitoring system
l Low power, high precision
649 Electric Components Suppliers
Short on time? Let Electric Components sellers contact you.
