Beijing Electric Components Suppliers and Manufacturers

The NXP MC56F800x family of digital signal controllers (DSCs) offer the functionality of a microcontroller with a flexible set of peripherals. The entry-level MC56F8006 and MCF56F8002 DSCs provide the most cost-effective solutions for mathematically intensive, power-sensitive, real-time control applications.

Features DSP and MCU functionality in a unified, C-efficient architecture with up to 32 MIPS at 32 MHz core frequency Up to 16 KB of Flash memory Up to 4 KB of RAM Integrated peripherals: Up to 6-channel PWM module Two up to 4-channel 12-bit ADCs One serial communication interface (SCI) with LIN slave functionality One serial peripheral interface (SPI) One inter-integrated circuit (I2C) port Up to 26 GPIOs This product is included in Our product longevity program, with assured supply for a minimum of 10 years after launch

kbit / s size adjustable Support L2 VPN, and EPL, EVPL, EPLn and EVPLn business Offers a variety of service interfaces and management interface 1.SDH service interface STM-1 electrical interface, STM-1/4/16 optical interface, STM-16 optical interfaces support given wavelength output can be directly docked with WDM equipment 2.PDH business electrical interface E1, T1, E3, DS3, E4 3.Ethernet Interface 4.Clock Interface 5.Alarm Interface 6.Management interface 7.Official Interface Cross-capacity Cross clock board High order cross ability Low order cross ability CXL1/4/16 20G 5G Device-level protection 1.TPS 2.Cross clock 1 +1 protection 3.Master 1 +1 protection 4.Power Protection TNT,Original Huawei package

Osn 3500 sdh mutiplexer Switching capacity:200g high order, 20g low Support e1, stm-1, atm stm-1, fe/ge/10ge, stm-1/4/16/64, e1/e3 Tnt, original huawei package

Dc input poe Pt-pse105g-e indoor single-port poe mid-span Standard 1. Indoor using, 48vdc / 650ma, poe port 6kv (10 / 700us) surge-protection 2 Boost design, input voltage: 10-24vdc 3. Wide-temperature design: -40? - +65? 4. Rail slot on the back, can be fixed at guide rail 1. Boost poe injector Pt-pse105g-e connected with switch to exchange data, supply power through cat5e cable to remote pd, effective distance is 100m. 2. Intelligence chip is inside, detective pd before supply power. Pt-pse105g-e with intelligence chip inside, detective pd before supply power, if the pd is compliant with ieee802.3af / ieee802.3at standard, supply 48vdc power, if not do not supply power, avoid of device destroy and increase safety level . 3. External solar power supply system connected Product allows 10-24vdc input and solar power panel is acceptable, output power is 30w, output current is 650ma, could powered for high power request pd, such as outdoor wireless base station, wireless ap, network cameras. 4. Better ambient temperature adaptation, convenience to fix. Pt-pse105g-e's ambient temperature is good, -40? ~ +65 ?; with rail slot, can be fixed at guide rail.

SDI-151 is a North seeker with digital display,constituted with dual degree of freedom dynamically tuned gyro,mechanical transmission and signal decoding circuit.Dual degree of freedom gyro has two basic features, procession and stable spin axis .Rotation axis of gyro remains the orientation relative to inertial space, oppositely, the earth rotates for its angular velocity . If take the earth as standard, the gyro's axis will be found rotating relative to the earth. Therefore, the gyro can track and measure the angular velocity of the earth.North seekers take advantage of this different component of angular velocity on X and Y axis, then get the reference axis position info/then get the system's position info by the rate difference on X and Y sensitive axis. Feature 1.Easy to operate 2.Automated north-seeking 3.With digital display 4.Meet vehicle-mounted environment Applications 1.Antenna positioning 2.Vehicle positioning 3.Radar positioning Performance Azimuth measurement range 0°~360° Azimuth measurement accuracy 0.06°1s Azimuth resolution 0.01° North seeking time 3min Prepare time 10min Operation state static Tilt angle measurement range(option) ±8° Tilt angle measurement accuracy(option) ±0.06° Digital display LCD Communication ports Serial ports RS-422/RS-232 Baud rate 9600bps Environmental Operating temp -40?~60? Bump 3g 8~11ms half-sine wave Electrical Input voltage 24~36VDC Operating current 1A Physical Size 180×170×185 mm Weight

Electrical parameters Ratio 1000: 1 or 2000:1 (customized) Accuracy class 0.2%, 0.5%, 1% Primary current 0 - 1000A AC Secondary current 0 - 5A AC (customized) Max. Cont. Input current 1200A Over voltage category CAT III 600V Output signal (AC current) 500mA,1A,5A AC at nominal input current Output signal (AC voltage) 333mV,500mV,1V,5V AC at nominal input current Frequency range 40Hz-2000Hz Dielectric strength 3KV 50Hz/60Hz at 1 minute Temperature range -20C to +55C Output 2.5 meter cable with D01 connector Max. voltage not insulated conductors 600 V Standard EN 61010-1, EN 61010-2-032, IEC60044-1 Installation Clamp type Output mode Lead output(2.5m) Mechanical parameters Dimensions (L x W x H) (mm) 163 x 310 x 34 Weight (g) 900 Holding wire diameter (mm) 110 Max. jaw opening (mm) 110 Jaw Color Black Material PC+ABS+Polycarbonate, UL94 V0

JMY6281 is based on NXP PN512, CV520 chip design. It supports USB HID, UART or IIC interface and fully compatible with ISO14443 Type A, ISO14443 Type B protocols and also NFC function. The dimension is 50.8mm * 50.8mm * 7.5mm.

Jmy601 is based on nxp mf rc531, sl rc400, or cl rc632 chip design. It supports uart or iic interface and fully compatible with iso14443 type a and iso14443 type b and iso15693 protocols. The dimension is 60mm * 60mm * 5.7mm. Description Jmy601 is a series of rfid read/write module with uart or iic communication port. It has various functions and supports multi iso/iec standard of contactless card. The rf protocol is complex, but the designer combined some frequent used command of rf card and then user could operate the cards with full function by sending simple command to the module. The module and antenna is integrated. The impedance between rf circuit and antenna was tuned by impedance analyzer, and then the module has excellent performance and stability. Main characteristics Modules integrated antenna, excellent consistency and stability light and slim rf protocol in accordance with emv2010 Qualifications Pcd: nxp mf rc531, sl rc400, cl rc632 Pcb layers4 Working frequency: 13.56mhz Termsed standard: iso14443a, iso14443b, iso15693 anti collision ability: full function anti collision; be able to set multi-cards or single card auto detecting card: termsed, default off, could be set

JMY6021 is based on NXP MF RC500, MF RC531, SL RC400 or CL RC632 chip design. It supports USB HID, RS232C, UART or IIC interface and fully compatible with ISO14443 Type A and ISO14443 Type B, ISO15693, and ISO7816(2 SAM Slots) protocols. The dimension is 100mm * 70mm * 10.6mm

JMY6122 is based on NXP CL RC663 chip design. It supports USB HID, RS232C, UART or IIC interface and fully compatible with ISO14443 Type A and ISO14443 Type B, ISO15693 and ISO7816(4 SAM Slots) protocols. Also it supports NFC functions. The dimension is 86.5mm * 65mm * 9.5mm.

JMY5011 is the second generation product based on JMY501 with UART and IIC serial port.JMY5011 has various functions and supports multi ISO/IEC standard of contactless card. The RFprotocol is complex. The designer combined some frequent used command of RF card and then usercould operate the cards with full function by sending simple command to the module. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is split design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the modules performance and stability.

JMY6804 is based on NXP CL RC663 chip design. It supports USB HID, RS232C, UART or IIC interface and fully compatible with ISO14443 Type A and ISO14443 Type B, ISO15693 and ISO7816(2 SAM Slots) protocols. The dimension is 70mm * 50mm * 16.5mm. JMY6804 is a series of RFID read/write module. It has various functions and supports multi ISO/IEC standard of contactless card. The RF protocol is complex, but the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. Main Characteristics Ferrite plate under the antenna, good performance for metal-around environments EMV2010 certification ability in RF protocol part 2 SAM slots, full fill payment system usage USB HID interface, convenience to use on PC Qualifications PCD model: NXP CL RC663 PCB Layers�4 Working frequency: 13.56MHz Termsed standard: ISO14443A, ISO14443B, ISO15693, ISO7816,NFC Anti collision ability: Full function anti collision; be able to set multi-cards or single card Auto detecting card: Supported, default OFF, could be set SAM slots: 2, T=0 & T=1 9600, 19200, 38400, 55800, 57600, 115200bps Data FLASH: 512 Bytes Power supply: DC 5V (±10%) Interface: USB HID, RS232C, UART or IIC by order Communication speed: IIC: Max.200Kbps UART: 19200bps, 9600bps, 38400bps, 57600bps, 115200bps USB: 2.0 HID class Interface level: UART / IIC 3.3V (5V tolerance) Max. command length: JCP04: 253bytes JCP05: 510bytes Power consumption: Max. 150mA Operating distance: 70mm (M1 typical distance, depending on card quality) Dimension: 70mm * 50mm * 16.5mm Weight: About 120g ISP: Supported RoHS: By order CE certification: in plan (Jan.17,2015,soon) Operating temperature: -25 to +85°C Storage temperature: -40 to +125°C

The adjustable range of permeability10khz=15000~50000, Excellent frequency characteristics High saturation magnetic induction strength, 1.20t, Lower eddy current losses Excellent temperature stability

Optical fiber sensors .Manufacturers

Cores, amorphous cores, nanocrystalline cores, permalloy cores, NI-FE cores, transformer cores.

Microcontroller decryption, chip crack, MCU attack, DSP reverse, code extraction and PCB.

Electronics electrical parts.

ZLP500, ZLP630, ZLP800, ZLP1000 electrical suspended platform, hoist, steel rope, safety rope, switch box.