Fans.
Switches, routers, servers, routers, modules, cables, ip phones.
Electronic parts.
Gas, steam, wind, hydraulic turbine, gas, diesel, HFO, engine generator, transformer, breaker, meter, cable.Epc or main contractor of power and electricity generation, transmission, distribution
Engines and generators.
Rfa generator, centrifuge.
Magneto meter, resistively meter, seismograph, gravimeter, borehole logging system, ground penetrating radar, x-ray fluorescence analyzer, sonic instrument, total station.
Water purifier.
Petroleum, electric power, electromechanical engineering contracting and optoelectronic.
Electrical cable, rubber cables, flexiable cable.
Material: low carbon steel Coating: zinc-coating or pvc-coated. Gabions are wire mesh boxes, containers or baskets filled with rock to prevent soil erosion and to retain/contain soil particles. They reduce water velocities and re-capture river bed sediment in streams. Flat Gabions, called River or Reno Mattresses are widely used in river courses where soil erosion is a problem over a wide flat area and a large area needs to be protected against soil loss/scour. They are used mostly in the civil engineering industry especially in the construction of roads.
Gas detector, gas analyzers, air tester, air monitor.
Flexible ducting, flexible aluminum foil duct, PVE vinyl flexible duct, PVE combi flexible duct, insulated flexible duct, PVE tarpaulin flexible duct, acoustic flexible ducting, flexible duct connector.
Place of Origin: Beijing, China (Mainland) Brand Name: HYLITON POWER Model Number: LXZ250250180060 Usage: Current Phase: Single Coil Structure: Toroidal Coil Number: Autotransformer Rated frequency: 50Hz or 60Hz Rated secondary current: 5A or 1A Rated short-time thermal current: 40kA,1s Rated continuous thermal current: 120%In Continuous power-frequency voltage: 3kV , 1min Instrument security factor: FSâ?¤10 Application condition Ambient temperature -25-+40 Average temperature of day â?¤40 Altitude â?¤3000m Pollution class III Technical data Rated frequency 50Hz or 60Hz Rated secondary current 5A or 1A Rated short-time thermal current 40kA,1s Rated continuous thermal current 120%In Continuous power-frequency voltage 3kV , 1min Instrument security factor FSâ?¤10
Rated frequency 50Hz or 60Hz Rated secondary current 5A or 1A Rated short-time thermal current 40kA,1s Rated insulation level 12/42/75 kV Ambient temperature 25~40 Altitude Up to 1000m above sea level Indoor device Standards The product performance is in accordance with GB20840.1 GB20840.2 and IEC61869-1 IEC61869-2 standards.
Quick Details Place of Origin: Beijing, China (Mainland) Brand Name: HYLITON POWER Model Number: LDZC-10/24/35kV Usage: Current Phase: Single/Three Coil Structure: Toroidal Coil Number: Autotransformer Rated frequency: 50Hz or 60Hz Rated secondary current: 5A or 1A Rated short-time thermal current: 40kA,1s Rated continuous thermal current: 120%In Continuous power-frequency voltage: 3kV , 1min Instrument security factor: FSâ?¤10
Current transformer.
Instrument transformer.
Low, medium and high voltage transformers 110kV Class Power Transformers General The110kV class low loss transformers are developed by Huapengour workshop through years of service experience and careful analysis of the advantages and disadvantages of the transformers of different manufacturers, both domestic and abroad, and are featured by low loss, low partial discharge, low noise, high strength against short circuit, and high reliability in service. Its outstanding performance has won high reputation throughout China, and the world, and are highly appreciated by experts of the circle. Transformers can be made with welded tank cover and/or flange , Thus obviated from the necessity of lifting out the active part for inspection after arrival on site. Partial discharge level: apparent discharge < 80pC at 1.5 times rated voltage. Noise level : below 58 dB for transformers 63MVA and below with AN cooling Losses: no-load loss 30% lower than specified by GB/T 6451-1995 Reliability: no damage or oil leakage have been found in transformers in service up to the present Short-circuit withstand capability: Our SZ9-31500/110,SSZ-50000/110 transformers successfully passed short-circuit test in National Transformer Quality Inspecting and Testing Center, and in CESI Laboratory of Italy. Winding 1. Partially interleaved continuous winding is used for HV winding to improve its behavior under lightning impulse, because of its more uniform voltage distribution. 2. All the spacers and vertical strips are rounded at corners, in order to obtain a more reliable insulation structure. 3. Zig-Zag directional flow is provided inside the windings, so that all parts of the windings are better cooled, resulting in lower winding temperature rise, and specifically lower hot-spot temperature, thus the insulation life of the transformer is prolonged. 4. Separate regulating windings are provided for both the 110kV high voltage and the 35kV medium voltage side, so that a more balanced ampere-turn is obtained in spite of tap-changing, the short-circuit withstand capability is thus promoted. Radially, the windings of a phase assembly are tight-fit, little space is left between the core and the low-voltage cylinder, and between the windings. All the vertical strips and cylinders are thoroughly dried before assembly, so that a tight phase assembly can be finally obtained. Core 1. High permeability grain oriented high quality cold-rolled sheets are used for the fabrication of core. The sheets are cut on automatic cutting line made by Georg Co. of Germany or Soenen Co. of Belgium. The burrs are controlled within 0.02mm. 2. The core is stacked without stacking the upper yoke, the upper yoke sheets are placed into position after the winding blocks are mounted on the core. The joints of the core sheets are mitred 45fpjoint with step-lap. The stacked core is pressed under even pressure and the edge of the sheets are painted with epoxy resin, so that a straight, robust, integral structure is obtained, helping to reduce core loss and noise. 3. Wooden strips are driven into the space between core and LV cylinder. The yoke is kept tightened by epoxy-resin impregnated glass tape, while the lower yoke is pressed against the wall of the lower tank through threaded bolts. The active part of the transformer is in addition kept in position by devices at three places between the upper yoke and the tank cover in such a way that the active part cannot be displaced during transportation.
24V series electric vehicle motor controller is the main drive motor controller developed by QianQin technology for light low-speed electric vehicles and medium and high-end three wheel electric vehicles, for 60V / 72V battery system and permanent magnet synchronous motor. The product adopts reliable and stable industrial ARM processor and low internal resistance MOSFET device, and adopts optimized vector control algorithm to realize efficient and safe vehicle driving to the maximum extent. The controller has the advantages of strong performance, long life, comfortable driving and riding, low noise, high efficiency, wide speed expansion range and so on.ã?? 24V series controller is equipped with compatible magnetic encoder as standard, which is more accurate for motor control. Specification: Rated voltage: 48VDC / 60VDC / 72VDC Using Infineon XMC4108 main control chip Operating voltage range: 36VDC ~ 100VDC Using Infineon 2EDL23N06 integrated driver chip Speed range: 0 ~ 5500RPM All power supplies use integrated power chips Maximum torque: 389N.m (gearbox reduction ratio 1:10) Collecting current with a current sensor Maximum bus current: 75ASeparate design of power and control, separate the power board and the control board, reducing the influence of the heat of the power part on the control part. The phase current is up to 330A, the power is fast, and the hard start can be adjusted to use a variety of models; voltage, current, temperature and other multiple protections, including motor temperature control protection; higher system reliability.
