1:this device adopted import PLC,the complete machine realizes machine electric integration autocontrol.From the manipulator divide labels advance,enter the pot,taking label,spread glue,paste the label,divide cutting to enter pot,enhance the production efficiency greatly.enter paper take label adopted the most advanced feida facilities,make the label high-accuracy location;solve the double pieces problem fundamentally.
2:rise and down the large capacity label storeroom automatically,adopted import shift sensor that control material level accurately,label store volume maximum can reached 2500 pieces
3:the module model quick replacement mold head,make the device replace mold only need 10 minutes.
4:automatic circulate type rubber supply pump,glue store volume can reached 20KG,the device can working 30 hours continuous no need add rubber liquid,when the end of operation the CIP clean system automatically and make the device filled with water and finish cleaning automatically under the circumstance of no need to dismantle the rubber box.
5:principal axis transducer speed mix,can adjust speed watonly itself according to potí»s diameter.
6:operating board equipped with function choice key,the operator can switchover the function among of paste label and pipe cutting,also can paste label and cut pipe at the same time.
Main technical parameter:
Applicable pot type: 80mm-200mm
Applicable label height: 50mm-400mm(after divide cutting)
Label precision: +/-0.5mm
Production efficiency:2000pot/hours(caculate by divide cut 4 pots one time)
Total power:1.5 KW
Presure:0.5 Mpa
Machine weight:850KG.
SG-3000 EVA glass laminating / laminated machine is a professional equipment to produce laminated glass without autoclave. It is able to produce various laminated glass thanks to the advantages of this machine and specific film. You can insert the silk, metal mesh, fibre or other films into normal glass sheets in order to produce decorative and functional laminated glass.
SG-3000-1DD is designed by means having solved many problems and difficult basis on decade experience, such as: Polluted glass by excessive adhesive, asymmetrical heating, low production but high energy consume etc. It is equipped with multilayer vacuum beds, and each bed is able to put double units so that the production capacity is double times than normal oven. This is a unique design of SG-3000-1DD.
SG-3000-1DD has the characteristic of short time for heating up and cooling down, even temperature, low costs and low power consume.
The machines with different number of floors (from one floor to five floors) and working stations (single or double) are all available for your choice according to your production requirements.
SG-3000 vacuum EVA glass laminating / laminated machine is a professional equipment to produce laminated glass without autoclave. It is able to produce various laminated glass thanks to the advantages of this machine and specific film. You can insert the silk, metal mesh, fibre or other films into normal glass sheets in order to produce decorative and functional laminated glass.
SG-3000 is designed by means having solved many problems and difficult basis on decade experience, such as: Polluted glass by excessive adhesive, asymmetrical heating, low production but high energy consume etc. It is equipped with multilayer vacuum beds, and each bed is able to load double units so that the production capacity is double times than normal oven. This is a unique design of SG-3000-4DD.
SG-3000-4DD applied with draft fan system, so that can generate an even temperature, multi rubber bags can be load at same time, PLC system and multi-area control as optional.
The machines with different number of floors (from one floor to five floors) and working stations (single or double) are all available for your choice according to your production requirements.
Made by fluorescence material,the information printed by this ribbon can not be seen,if you want to see the information, must use special tool,it will help you protect your product not to be fraud.
Various kinds of mechanical seals. Including, rubber bellows seals, pusher seals, ptfe wedge seals, metal bellows seals, cartridge seals, etc. The seals are available in various material combinations, and in both metric and inch sizes. We also do tailor-made seals according to the customersf+ drawings and specs.
Available in both metric & imperial sizes, and to international standards, such as din 24960. Equivalent seals to t1, t2, t2100, t24, t502, mg1, etc.
Various kinds of mechanical seals. Including, rubber bellows seals, pusher seals, ptfe wedge seals, metal bellows seals, cartridge seals, etc. The seals are available in various material combinations, and in both metric and inch sizes. We also do tailor-made seals according to the customers drawings and specs.
Available in both metric & imperial sizes, and to international standards, such as din 24960. Equivalent seals to t1, t2, t2100, t24, t502, mg1, etc.
Mechanical seal rings are components in a mechanical seal that are used to create a leak-proof seal between rotating and stationary components in equipment, such as pumps and mixers. They are typically made of materials that have low friction and high wear resistance, such as carbon, ceramic, or tungsten carbide. The mechanical seal rings work together to maintain the seal, even under high pressure and temperature, to prevent fluid or gas from escaping.
Mechanical seal rings are used to seal the gap between the rotating shaft and the stationary housing in equipment such as pumps and mixers, so that liquid cannot escape through the gap. These sealing mechanisms are often referred to as shaft seals or pump seals.
Jk manufactures primary rings or carbon/graphite wear surfaces that are used in many of the most sophisticated and reliable mechanical seals used in industrial, aerospace and military applications today. These mechanical seal assemblies typically consist of a carbon/graphite primary seal ring, mating face ring, secondary (O-ring) seal ring, spring, fasteners and metal housing.
Mechanical seal main rings can be supplied to customer drawings and specifications. These rings can be supplied plain, heat shrink fit or bonded in a metal retaining ring
Advantages
The support skeleton enhances the overall strength of the seal ring and the sealing capacity of the sealing ring can be increased by working pressure.
The sealing material has the advantage of high strength, high hardness and good elasticity
Working conditions
Compliant for use with several standards about hydraulic testing requirements including API 5CT-2018, ISO11960-2011 Petroleum and natural gas industries Steel pipes for casing or tubing, GB/T9711-2017; GB/T8163-2018 for seamless steel tubes; GB/T3091-2015 for welded steel pipes.
Working pressure: 80 MPa
Working temperature: -20 to +80
Working medium: water, emulsion, hydraulic oil
Material: Polyurethane
If you want to learn more, please visit our website.
Mechanical seal rings are components in a mechanical seal that are used to create a leak-proof seal between rotating and stationary components in equipment, such as pumps and mixers. They are typically made of materials that have low friction and high wear resistance, such as carbon, ceramic, or tungsten carbide. The mechanical seal rings work together to maintain the seal, even under high pressure and temperature, to prevent fluid or gas from escaping.
Mechanical seal rings are used to seal the gap between the rotating shaft and the stationary housing in equipment such as pumps and mixers, so that liquid cannot escape through the gap. These sealing mechanisms are often referred to as shaft seals or pump seals.
Jk manufactures primary rings or carbon/graphite wear surfaces that are used in many of the most sophisticated and reliable mechanical seals used in industrial, aerospace and military applications today. These mechanical seal assemblies typically consist of a carbon/graphite primary seal ring, mating face ring, secondary (O-ring) seal ring, spring, fasteners and metal housing.
Mechanical seal main rings can be supplied to customer drawings and specifications. These rings can be supplied plain, heat shrink fit or bonded in a metal retaining ring
Advantages
The support skeleton enhances the overall strength of the seal ring and the sealing capacity of the sealing ring can be increased by working pressure.
The sealing material has the advantage of high strength, high hardness and good elasticity
Working conditions
Compliant for use with several standards about hydraulic testing requirements including API 5CT-2018, ISO11960-2011 Petroleum and natural gas industries Steel pipes for casing or tubing, GB/T9711-2017; GB/T8163-2018 for seamless steel tubes; GB/T3091-2015 for welded steel pipes.
Working pressure: 80 MPa
Working temperature: -20 to +80
Working medium: water, emulsion, hydraulic oil
Material: Polyurethane
If you want to learn more, please visit our website.
Mechanical seal rings are components in a mechanical seal that are used to create a leak-proof seal between rotating and stationary components in equipment, such as pumps and mixers. They are typically made of materials that have low friction and high wear resistance, such as carbon, ceramic, or tungsten carbide. The mechanical seal rings work together to maintain the seal, even under high pressure and temperature, to prevent fluid or gas from escaping.
Mechanical seal rings are used to seal the gap between the rotating shaft and the stationary housing in equipment such as pumps and mixers, so that liquid cannot escape through the gap. These sealing mechanisms are often referred to as shaft seals or pump seals.
Jk manufactures primary rings or carbon/graphite wear surfaces that are used in many of the most sophisticated and reliable mechanical seals used in industrial, aerospace and military applications today. These mechanical seal assemblies typically consist of a carbon/graphite primary seal ring, mating face ring, secondary (O-ring) seal ring, spring, fasteners and metal housing.
Mechanical seal main rings can be supplied to customer drawings and specifications. These rings can be supplied plain, heat shrink fit or bonded in a metal retaining ring
Advantages
The support skeleton enhances the overall strength of the seal ring and the sealing capacity of the sealing ring can be increased by working pressure.
The sealing material has the advantage of high strength, high hardness and good elasticity
Working conditions
Compliant for use with several standards about hydraulic testing requirements including API 5CT-2018, ISO11960-2011 Petroleum and natural gas industries Steel pipes for casing or tubing, GB/T9711-2017; GB/T8163-2018 for seamless steel tubes; GB/T3091-2015 for welded steel pipes.
Working pressure: 80 MPa
Working temperature: -20 to +80
Working medium: water, emulsion, hydraulic oil
Material: Polyurethane
If you want to learn more, please visit our website.
Slip Ring Seal
A slip ring seal is a type of mechanical sealing device used to prevent fluid or gas leakage in rotating machinery. It is typically used in equipment with rotating shafts, such as electric motors or generators, to provide a seal around the rotating shaft and prevent the leakage of fluids or gases from one side of the seal to the other. A slip ring seal is typically made up of a stationary component and a rotating component, and is designed to maintain a sealing interface as the shaft rotates.
Performance and Purpose
Slip ring combined seal is made up of low-friction PTFE composite slip ring and O-ring. It has the advantages of friction resistance, temperature resistance, high pressure bearing ability, high linear velocity, small friction force and long use-life. And which is applicable to dynamic and static seal of hydraulic and pneumatic system in aircraft, metallurgy, petroleum, chemical, textile, food industry and so on.
Advantage
The structure is simple, easy to install and can be used repeatedly
The sealing performance is reliable and adjustable
Different types of PTFE materials(Self pressed PTFE barrel material)can be selected according to the working conditions of sealing environment
The working life of dynamic pressure seal is 5 ~ 10 times higher than that of conventional rubber sealing products, and the highest working life can reach dozens of times
It can be used as oil-free lubrication seal
The friction force is small, and the dynamic and static friction force are equal. The friction force is 1 / 2 ~ 1 / 4 of the O-type rubber ring, which can eliminate the crawling phenomenon of motion at low speed and low pressure.
If you are looking for more details, kindly visit our website.
Sealing component is mainly used in hydro-static testing machines for pressure tests of steel pipes, it is applicable to the pressure testing of casings, tubings, natural gas pipes and other steel pipes. As ultra pressure components, sealing components are very suitable for machines that require high pressure seals.
Descripation:
The sealing component is made up of a polyurethane sealing ring and fan-shaped supporters. It is mainly used in hydro-static testing machines for pressure tests of steel pipes. In the non-working state there will be a gap between the sealing ring and the surface of the steel pipe. When testing, hydraulic liquid is applied to the surface of the sealing ring. The ring is then pressed to enclose the surface of steel pipe firmly, allowing pressure testing can be performed. It is applicable to the pressure testing of casings, tubings, natural gas pipes and other steel pipes. It has also been used in leak inspection of steel pipes, connections, welded joints and sealing for high pressure valves.
The u ring seal makes use of the advantages of Polyurethane, such as high strength, hardness, good elasticity and durability. It is used in the hydraulic testing of oil well casing tubes, steel pipes and a variety of welded steel pipes of the petroleum and natural gas industry.
Product information
The u ring seal makes use of the advantages of Polyurethane, such as high strength, hardness, good elasticity and durability, it has high sealing performance, abrasion resistance, and low deformation.It is used in the hydraulic testing of oil well casing tubes, steel pipes and a variety of welded steel pipes of the petroleum and natural gas industry.
